DK2 Power OPC503V User manual

OPC503V
3 INCH CHIPPER SHREDDER
OFFROAD-TOW ONLY • KOHLER® COMMAND PRO ENGINE • TOP LOADING • VACUUM KIT
ASSEMBLY GUIDE
PARTS AND SERVICE 702-331-5353
-
WWW.DK2POWER.COM
DK2 USA WEST
4301 S VALLEY VIEW BLVD. SUITE 10-11
LAS VEGAS, NEVADA
89103 USA
DK2 USA EAST
3750 SOUTH AVENUE, NORTH UNIT
TOLEDO, OHIO
43615 USA
DK2 CORPORATE HEAD OFFICE
5330 MAINWAY
BURLINGTON, ONTARIO
L7L6A4 CANADA

TABLE OF CONTENTS
Axle .................................................................................................................................................................................. 3
Wheels ............................................................................................................................................................................ 4
Drop Stand & Tow Bar ................................................................................................................................................. 5
Side Feed Chute .......................................................................................................................................................... 6
Top Loading Feed Chute Handle ............................................................................................................................. 7
Top Loading Feed Chute ............................................................................................................................................ 8
Chip Chute ..................................................................................................................................................................... 9
Assemble the Hose ...................................................................................................................................................... 10
Install the Hose .............................................................................................................................................................. 11
Important Information .................................................................................................................................................. 12
Your Kohler® 7HP CH270 Engine ............................................................................................................................. 13
SCHEMATICS AND PARTS
Checking the Schematics .......................................................................................................................................... 14
Parts List ......................................................................................................................................................................... 15
OPERATION
Before Turning Key and Pull Starting Engine ....................................................................................................... 16
Quick Start and Troubleshooting ............................................................................................................................. 17
Warranty........................................................................................................................................................................... 18

3
STEP 1
AXLE
1. Install the axle with the bolts provided.

4
STEP 2
WHEELS
1. Install the first washer on wheel axle, then wheel, then washer then locking pins.
Relocate the pin in the wheel axle to lock wheels from moving while you’re
chipping, or freewheel when towing.

5
STEP 3
DROP STAND & TOW BAR
1. Install the drop stand.
2. Install the tow bar.

6
STEP 4
SIDE FEED CHUTE
1. Install the 3 inch tree feed chute with the bolts provided.

7
STEP 5
TOP LOADING FEED CHUTE HANDLE
1. Install the handle with 4 bolts.

8
STEP 6
TOP LOADING FEED CHUTE
1. Align the door frame with 4 holes in body and set door in place as shown.
2. Mount the to chute to the unit
3. Plug in the white connector for the key switch.

9
STEP 7
CHIP CHUTE
1. Mount the chip chute.

10
STEP 8
ASSEMBLE THE HOSE
1. Assemble the hose handle and hose as shown using supplied hardware.