DMP Electronics EBOX-335xDX3 Series User manual

EBOX-335xDX3Series
User’s Guide

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 2
Copyright
The information in this manual is subject to change without notice for continuous improvement in
the product. All rights are reserved. The manufacturer assumes no responsibility for any
inaccuracies that may contain in this document, and makes no commitment to update or to keep
current information contain in this manual.
No part of this manual may be reproduced, copied, translated or transmitted, in whole or in part, in
any form or by any means without the prior written permission of the DMP Electronics Inc.
Copyright 2019 DMP Electronics Inc.
Trademarks Acknowledgment
is the registered trademarks of DMP Electronics Inc.
Other brand names, product names or trade names appearing in this document are the properties
and registered trademarks of their respective owners. All names mentioned herewith are served for
identification purpose only.
Safety Information
WARNING
Do not expose EBOX to rain or moisture,in order to prevent shock and fire hazard.
Never install EBOX in wet locations.
Do not open cabinetto avoid electrical shock. Refer to the nearest dealer for qualified personnel servicing.
Never touch un-insulated terminals or wire unless power adaptorand display monitor are disconnected.
Locate EBOX as close as possible to the socket outline for easyaccess and to avoid force caused by
entanglingof your arms with surrounding cables from the EBOX.
When using EBOX, avoid usingor installing the modem to theserial port duringa storm or alightning.
Do not use the modem or a telephone to report a gas leak in the vicinity of theleak.
USB connectors are supplied withLimitedPower Sources.
DO NOT ATTEMPT TO OPEN OR TO DISASSEMBLE THE CHASSIS (ENCASING)
OF THIS PRODUCT. PLEASE CONTACT YOUR NEAREST DEALER FOR
SERVICING FROM QUALIFIED TECHNICIAN.

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 3
Regulatory
FCC Class A Note
This equipmenthas been tested and found to comply withthe limits for a Class Adigital device, pursuant to
Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful
interference when theequipment is operated in a commercial environment.Thisequipment generates, uses
and can radiate radio frequency energy and,if not installed and used in accordance with theinstruction
manual, may cause harmful interference in which case the user will be required to correct the interference at
his own expense. Testing was done with shieldedcables. Therefore, in order to complywith the FCC
regulations, you must use shielded cables with your installation.
WARNING
Thisproduct complies with EN55022 class A. In a domestic environment thisproduct may cause radio
interference in which case the user may be required to take adequate measures.
Changes or modificationsto this unit not expressly approved bythe party responsible for compliance could
void theuser’s authority to operate the equipment.
Thisdevice complies with Part 15 of the FCCrules.Operation is subject to the following two conditions:
(1) this device maynot cause harmful interference, and (2) thisdevice must acceptany interference received,
including interference that may cause undesired operation.
Thisdigital apparatus does not exceed the Class A limits for radio noise emissions from digitalapparatus as set
out in the interference - causing equipment standard entitled “Digital Apparatus”, ICES-003 ofthe Department
of Communications.
Manufacturer’s Declaration of Conformity
This equipmenthas beentested and found to complywith the requirements of European Community Council
Directives 89/336/EEC & 73/23/EEC relating to electromagnetic compatibilityand product safety respectively.
Attention
Thisproduct has been designed and certified to comply with certain regulatory requirements pertaining to
Information Technology Equipment.This product hasnot been designed for use as a medical device. Without
limitation ofthe foregoing, thisproductis not intended and has not beencertifiedfor useina hospitalor
clinical environment to diagnose, treat, or monitor patients under medical supervision, and isnot intendedand
hasnot been certified to makephysical or electrical contact with patients, nor to transfer energy toor from
patients and/or to detect such energy transfer to or frompatients.

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 4
Purchase Agreement
Purpose:
In accordance to the general commercial conduct of Trust and Fair Trade,herewith below isthe agreement for
the protection for both parties, DMP and Users in pursuant of trading.
Product Description:
With this product, herewith also known as EBOX-336x Series, which is a simplified and economicaldesign of an
embedded device for Special Purpose Personal Computing. The basic specifications of this product is
comprised of the x86 technology design, and with onboard 1GB/ 2GB DDR3 System memory, VGA or HDMI
display, USB, COM ports, and LAN Interfaces.
Distribution Convention:
1. ThisProduct includes a PCand apowersupplyunit.Uponreceivingthisproduct,please referto user
manual to check for thecontentsand appearance of this product; contact the nearest dealer or DMP
office for anydefectiveor missing parts immediately. The supplier willnot beresponsible forany
reported discrepancythere after the expiration period of 3-days from the received date.
2. In consideration of transportation and thecost of storage, the supplier providesto the distributors a
warranty of 12 months. This warranty covers thefailure caused byhardware breakdown (excluding hard
drives),but doesnot coverthe act ofmisuseand mishandling.
3. Thesupplier will not accept unknown post, therefore ifyouwish to repair orto return your goods –
kindly please contact your nearest dealer to make your declaration, and at the same time, apply foran
RMA number (RMAstandsfor Return Merchandise Authorization –please ask forRMA form and fill-up
forauthorization).
4. Thefreight for return goodsfor repair willfollowthe International customary practice and convention:
Both parties is to pay forfreight of one shipment each. The shipper is required to prepay the freight from
the place of origin (This means that thereturnee (user) covers the freightfor return goods, while the
Supplier covers the freight for goods after the repair).
5. Obsolete warrantyis referred to as: (1) Expiration of warrantyor (2) Damage dueto misuse within
warranty. TheSupplier will be taken into consideration of the circumstances,to provide repair service
with charges expense for obsolete warranty. This expense includesthe cost of material andthe cost of
labor.
Note: If there is other particular issue, not listed in the above conditions, both parties agreed to follow the
General Law of Commerce with fair andreasonablediscussion in handling and resolving the argument.

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 5
Contents
Chapter 1
07 Unpacking EBOXMiniPC
Chapter 2
10 EBOX-335xDX3 Series Overview
11 EBOX-335xDX3-RCA SeriesOverview
12 SystemSpecifications
14 Peripherals
15 SD card recommendation
Chapter 3
17 BIOS Reconfiguring
18 Drivers Installation Guide
21 Additional Information
21 Screen rotation
22 Turn off the display function setting
23 HDMI 1080p video playback
24 PXE Diskless boot setting
25 Linux installation
Chapter 4
31 Onboard Connectors Summary
32 Pin Assignments
Chapter 5
35 TakingCare ofEBOX
37 Troubleshooting
Chapter 6
40 Terms andCondition
40 Warranty
40 Service andSupport
40 Return Merchandise Authorization (RMA) Policy
40 ShippingPolicy

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 6
Chapter1

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 7
Unpacking EBOX Mini PC
Component List:
Item No.
Description
Quantity
1
EBOX-335xDX3 Series Mini PC
x1
2
10Wpower supply (Optional)
x1
3
75 x 75mm to 100 x 100mm VESA mounting rack (Optional)
x1
Note: The accessories are subject to change without immediate notice.
Check before Use
1. EBOX-335xDX3 SeriesUnit
2. Power Supply
3. VESA rack

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 8
Preface
EBOX-335xDX3 SeriesMini PC
EBOX-335xDX3 Series is a revolutionary device which is especially designed for limited physical space and
temperature concerns. No matter you are in a jammed office, a crowded place, or public transportation, EBOX
can be easily integrated with a VESA LCD to bring it to access at any time.
It can be attached to any VESA mounting fixture; allowing it to be securely mounted onto desks, walls, or
buildings, and thereby optimizes your workarea. It can also attach directly to any size LCD for a mobile system
for the use at trade shows, presentations, promotions, etc. With FANLESS design, it’s ideal to be used in the
environment where temperature demand is critical.
So, if you are looking fora device that is able to provide with more mobility & space, and at the same time uses
less power consumption, EBOX-335xDX3 Serieswillbesurelymeetyourneed.
The VESA® FDMI™ Standard defines mounting interfaces, hole patterns and associated cable/ power supply
locations for LCD monitors,plasma displays and other flat panel devices. EBOX-335xDX3 Series isdesignedtofit
this standard to make monitorattachment quickly andeasily.

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 9
Chapter2

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 10
EBOX-335xDX3 Series Overview
Front Panel
A: Reset Button
For system reset or turn on.
B: Power LED
LED lights up when the system is turned on.
C: Audio Line Out
Audio output to speaker.
D: Audio Mic In
For Microphone input.
E: USB 2.0 port
Connection for external USB devices.
F: SD Card Slot
System support bootable from SD Card.
Back Panel
G: USB 2.0 port
Connection for external USB devices.
H: VGA port D-Sub 15-pin
Support VGA display.
I: RJ-45 LAN Jack
10/100 Mbps LAN x1 (Built-in PXE diskless boot)
or 1G LAN x1 (PXE not support)
J: Micro-B USB Power connector
K: RS-232 port
G
H
G
I
J
K
K
A
B
C
D
E
F
B
C
D
E
E
F
E
G
H
G
I
J

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 11
EBOX-335xDX3 RCA Series Overview
Front Panel
A: Micro SD Card Slot
System support bootable from Micro SD Card.
B: Audio Mic in
For Microphone input.
C: Audio Line Out
Audio output to speaker.
D: Power LED
LED lights up when system is turned on.
E: Internet LED
LED lights up when system is connected to internet.
F: USB 2.0 port
Connection for external USB devices.
Back Panel
F: USB 2.0 port
Connection for external USB devices.
G: RJ-45 LAN Jack
10/100Mbps LAN built-in PXE diskless boot.
H: HDMI output
Support HDMI display.
I: Power switch
To turn the system power on or off.
J: Micro-B USB Power connector
K: RCA jack (Isolation)
Support speaker with RCA input.
L: VGA port D-Sub 15-pin
Support VGA display.
F
G
G
H
J
K
A
B
C
D
E
F
I
L
F
G
J
K
F

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 12
System Specifications
CPU
Vortex86DX3 Dual core (1GHz)
*Windows platform 64-bit not support
Main Memory
1GB DDR3 (32-bit DRAM bus, EBOX-3350DX3Series)
2GB DDR3 (32-bit DRAM bus, EBOX-3352DX3Series)
BIOS
AMI BIOS
Display
VGA: Resolution upto 1920 x 1080 pixels
HDMI: Resolution upto 1920 x1080pixels
I/OConnectors
1. USB 2.0 x 3 (2 at front, 1at rear)
2. SATA (for SATA DOM) x 1(*)
3. SD Card slot x1
4. Micro SD card slot x1(*)
5. 10/100 MbpsLAN x1or1G LAN x1
6. Mic in x 1+ Line out x 1
7. Standard MiniPCIe(not support USBSignal) x1(*)
8. RS-232 port x2
9. RCA connector x2(*)
*2, 4, 7, 9 available in RCA Series.
Dimension & Weight
95 x 95 x 20mm/ 280g
95 x 95 x 35mm/ 360g
Powerconsumption
EBOX-335xDX3 Series: DC +5V@2A
EBOX-335xDX3-RCA Series: DC +5V@1.5A
Supported Operating system
Windows 7 Home/ Pro
Windows 7 Embedded
Windows XP Home/ Pro
Windows XP Embedded
Linux OS (Support list on EBOX website)

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 13
Peripherals
Connecting Power Adaptor &Monitor
A: Micro -BUSB PowerJack
EBOX-335xDX3 Series use Micro-B USB power cable +5V@2A AC
adapter for the power source.
Note:
Model Types with Auto Power On supported, device will auto
boot up after power adaptor is plug on.
B: VGAConnection
ConnectingVGAdisplay viaVGA cable.
C: HDMIConnection
ConnectingHDMI displayviaHDMIcable.
*For EBOX-335xDX3-RCASeries.
A
B
A
C
B
B
A
A

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 14
Peripherals
Connecting Input & Output ports
EBOX-335xDX3 series provides 3 externalUSB ports (2at front,1 at rear).
D: SDCardSlot
Forbooting device by SDCard.
E:Microphone/Earphone
335xDX3 SeriessupportsMicrophoneInputand SpeakerOutput
F: USB 2.0 port
Connection for external USB devices.
G: RJ-45 LAN
RJ-45 LAN jack for Ethernet connection.
H: Serialport
Connection for serial port interface devices.
Connecting RCA connector
H
H
D
E
F
F
G
I: RCAport
RCA ports transmit stereo analog audio output
I

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 15
SD/ Micro SD card recommendation
To use Class 10 SD card is highly recommended.
EBOX-335xDX3 Series support SD and SDHC only (SDXC not support). Users may use SDXC on EBOX,
however, it will be recognized as SDHC and capacity support up to 32GB only.
Test environment:
Products: EB-335xDX3 Series
SD card: Kingston Canvas Select SDXC UHS-I 64GB Class 10
BIOS: AMI BIOS
OS: WES7 (Windows embedded standard 7)
Disk benchmark software: CrystalDiskMark 6.0.2
Test result:
SD card Speed
Read [MB/s]
Write [MB/s]
Seq Q32T1
21.34
15.39
Note: Seq Q32T1: Sequential (Block Size=128KiB) Read/ Write with multi Queues & Threads

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 16
Chapter3

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 17
BIOS Reconfiguring
1. AMI BIOS is used in EBOX. To reconfigure the hardware, press or hit the <Del> key to enter the
BIOS setup main menu as below:
2. Press <Esc> to go back to main menu.
3. Press <F9> to load factory default setting.
4. Adjust BIOS settings, and be sure that your settings will affect.
For Windows platform users, please use default setting directly.
5. Press <Tab> move to boot menu to find default setting as below:
6. Set up the boot device order, press <F10> and select “Save Settings and Exit”, press “Y” to save
the changes. Unit will restart to the new setup.

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 18
Drivers Installation guide
Under the Windows series OS, the following drivers need to be installed manually.
1. M2015R7 VGA driver
2. Ethernetdriver
3. USBWirelessLAN Dongle driver(Optional)
4. Audio driver (for windows XP only)
Note:
1. Please download drivers from EBOX download Page.
2. For Windows 7 or Windows 7 Embedded OS, install XMPlay for audio player, download here.
VGAdriver:
Unzip the downloaded file and double click the setting .exe file then “Next” as below to install:
After VGA driverinstalled, restartcomputer and you will be able to select resolution up to 1920 x 1080 pixels.

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 19
Ethernet driver:
1. Find the yellow question mark of Ethernet in theDevice Manager under thecontrol panel/ system.
2. Select “Update Driver Software” and choose the right path, then click “Installthis driver software anyway”
when Windows Security popped out.
3. After installation completed, the Device Manager will update and show the correct device.

EBOX-335xDX3 Series User Manual
DMP Electronics Inc. 20
Audio driver:
Unzip the downloaded file and double click the setting .exe file, then “Next” as below to install. After the
installationcompleted, the Device Manager will update and showthe correct device.