DMP Electronics 1301 Series Assembly instructions

1301 Series Proximity Readers
Description
Greatly reduce the time needed to add multiple user codes with the 1301 Series Proximity Readers. Using Remote Link,
System Link or Entré, simply scan the user proximity device instead of manually typing the user code.

The reader draws power from the computer USB port, no additional power is necessary.
1301P Proximity Reader: Used in conjunction with DMP proximity credentials

Installing the Reader

computer. Windows™ automatically recognizes the
new hardware and initiates the driver and hardware
installation processes. Follow the Windows instructions
to load the driver. The Red LED on the reader turns on
when the unit is installed and receives power.
Conguring Remote/System Link
After properly connecting the reader to a USB port on the computer and installing the reader driver, open System >
Congure > Remote/System Link. Select the Other Tab.
Enter the following information to setup the software program to work with the reader.
COM Port:
Device Manager.
Baud Rate: This is the speed at which Remote Link or
System Link communicates with the reader. The reader
operates at the default Baud Rate of 9600.
Max Code Length: Select 5 or 6 character length
Reader Model: Select USB 6081 as the reader model.
Test: 
Rate.
Conguring Entré
After properly connecting the reader to a USB port on the computer and installing the reader driver, open Edit >
Preferences. Select the Card Reader 
Add
window to add the card reader to Entré.
Enter the following information to setup the software
program to work with the reader.
Enabled:
Name: Type in a name for the card reader.
Model:

COM Port: Select the Port to which the reader is connected.

Device Manager.
Wiegand card number start bit: Leave with defaulted
values.
Wiegand card number end bit: Leave with defaulted values.
RFID
EAS
I
NC
Figure 1: 1301 Series Prox Reader Figure 2: USB Connection
InstallatIon sheet


      


www.dmp.com
Made in the USA 
9355
Using the Reader with Remote Link
File > Panel Information
to open that panel.
Program > User Codes. To add a new user, click the New 
Scan Card
device. After clicking the Scan Card

the user.

Using the Reader with System Link
Panel > Connect and click the Connect button to connect to the panel.
Program > User Codes. To add a new user, click the New 
user information.
Scan Card
device. After clicking the Scan Card

the user.

Using the Reader with Entré
Management >Badges from the main menu to open up a Badge window.
Add
To scan the card #:
Select the General
Read

To generate a User Code from the card:
Select the User Code
Generate
From the drop down menu, select Generate from card number.

Save and Close
Ordering Information
1301P Proximity Reader for DMP proximity
credentials
  
credentials
Listings and Approvals

Specications
 
Maximum Read Range 1" to 3"
  
Compatibility
Remote Link
System Link
Entré Lite
Entré Business
Entré Enterprise
