DMP Electronics XR150 series User manual

© 2014 Digital Monitoring Products, Inc.
Information furnished by DMP is believed to be accurate and reliable.
This information is subject to change without notice.
Silencing an Alarm
When the alarm bell or siren is sounding, enter your user code or present your
card to a keypad or reader during the Status List display.
IS THIS A FALSE ALARM? YES NO or CANCEL VERIFY displays.
• If a burglar alarm is valid, press NO or VERIFY to send a verication
message to the Central Station. The system will remain armed.
• If a valid alarm has not occurred, press YES or CANCEL to cancel the
alarm and send an Abort or Cancel message to the Central Station and the
security system will be disarmed.
Note: For Area Systems, this prompt is displayed only if the User Code has the
authority to disarm the area.

XR150/XR350/XR550 User Guide i
User Guide
for XR150/XR350/XR550 Series Panels
Table of Contents
Section Page Section Page
Introduction ....................................................................... 1
XR150, XR350, and XR550 Systems............................................1
About Your Security System .......................................................1
Emergency Evacuation Plans......................................................2
DMP Keypads ...........................................................................3
The Select keys.........................................................................4
Power/Armed LED .....................................................................4
Power/Armed Logo....................................................................5
Panic Functions .........................................................................5
7/0 Panic Function .....................................................................6
Common Keys on All Keypads.....................................................6
Using the Keypad ......................................................................6
Keypad User Options .................................................................7
Special Keypad Tones ................................................................8
DMP Wireless ...........................................................................9
Special Wireless Displays ...........................................................9
Special Keypad Displays...........................................................10
Cell Phone Messages ...............................................................11
MyAccess™Text Messaging Commands..................................... 11
Understanding Security System Terms ......................................11
Arming and Disarming ..................................................... 14
General Arming Operation........................................................14
Key Fob Arming.......................................................................15
Key Fob Disarming ..................................................................15
Area System Arming Operation.................................................16
Area System Disarming Operation ............................................ 17
All/Perimeter System Arming.................................................... 18
All/Perimeter System Disarming................................................19
Home/Sleep/Away and Home/Sleep/Away
with Guest System Arming ....................................................... 20
Home/Sleep/Away and Home/Sleep/Away
with Guest System Disarming................................................... 21
Extending Schedules ..............................................................22
Keypad Shortcut Keys.............................................................. 22
User Menu ........................................................................ 24
Accessing the User Menu ........................................................24
User Menu Options..................................................................24
Alarm Silence..........................................................................25
Sensor Reset...........................................................................25
Lockdown ...............................................................................25
Door Lock/Unlock.................................................................... 26
Door Access............................................................................ 26
Armed Areas Display ..............................................................26
Outputs On Off ......................................................................26
Favorite ..................................................................................27
Z-Wave Setup .........................................................................28
Zone Status ...........................................................................33
Bypass Zones .........................................................................33
Zone Monitor .......................................................................... 34
System Status.........................................................................35
System Test ............................................................................35
User Proles ...........................................................................37

ii XR150/XR350/XR550 User Guide
User Proles Chart...................................................................40
User Codes .............................................................................41
Forgive Failure to Exit ..............................................................43
Ambush Code .........................................................................44
Extend Closing ........................................................................44
Schedules ...............................................................................44
Setting Schedules....................................................................45
Setting Holiday Dates (HOL) ....................................................47
Favorites.................................................................................47
Display Events ........................................................................48
Service Request ......................................................................48
Fire Drill .................................................................................49
System Setup ................................................................... 50
System Setup Record...............................................................50
Key Fob Button Programming................................................... 51
Area Names and Numbers Record ............................................52
Z-Wave Device Name...............................................................53
Z-Wave Favorites List...............................................................54
User Proles Record ................................................................ 55
User Codes Record ..................................................................56
Schedules Record....................................................................57
Holiday Date Record ................................................................58
Output Record ........................................................................58
About the Display Events Section..............................................59
Appendix A ....................................................................... 60
Arming and Disarming Event Displays .......................................60
Zone Event Displays ................................................................60
Supervisory Event Displays ......................................................60
User Code Change Event Displays ............................................60
Zone Bypass Event Displays .....................................................60
Door Access Event Displays...................................................... 61
System Monitor Event Displays.................................................61
Schedule Change Event Displays ..............................................61
Wireless Jamming Event Displays .............................................62
Wireless Trouble Event Displays................................................ 62
Appendix B ....................................................................... 63
Zone Status Browser ..............................................................63
Bypass Zones Browser............................................................. 64
Zone Monitor Browser.............................................................. 64
Add User Codes Browser..........................................................65
Change User Codes Browser ....................................................65
Delete User Codes Browser ......................................................66
Add User Proles Browser........................................................66
Change User Proles Browser...................................................67
Delete User Proles Browser .................................................... 67
Appendix C ....................................................................... 68
Output Groups Browser ...........................................................68
Outputs On/Off Browser ..........................................................68
User Disarm and Entry.............................................................69
Entering User Names ..............................................................69
Appendix D ....................................................................... 70
Easy Entry™ User’s Guide ........................................................71
Appendix E........................................................................ 71
Appendix F........................................................................ 73
Email/Cell Phone Message User’s Guide ....................................73
MyAccess™Text Messaging Commands..................................... 74
Subscribe to Text Messages .....................................................76
Frequently Asked Questions .....................................................77
Common Keypad Displays ........................................................78

XR150/XR350/XR550 User Guide 1Introduction
Introduction
A Note About False Alarms
One of the most important concerns facing the security industry
today is false alarms. The accidental dispatching of police and
re agencies places others in jeopardy by limiting the response
capability of those emergency service units.
As part of our commitment to reducing false alarms, we would like
to encourage you to read this guide thoroughly. All the information
contained here can help you quickly, and comfortably, learn the
system operation. If you have any additional questions, or feel
that you need more training, please do not hesitate to contact
your alarm dealer.
Note: There may be a 30-second alarm communication delay
pre-programmed at installation to allow disarming if a false alarm
occurs. This delay is optional and can be removed or increased to
45 seconds by your alarm dealer.
Test Your System Weekly
It is recommended that you test the burglary portion of your
system at least once each week. Testing should involve an active
test of all doors, windows, and motion detectors connected to your
system. If your system also has re protection, call the service
departmenttondouthowthisportionofyoursystemshouldbe
tested.
Refer to the System Test section of this guide for instructions on
testing the burglary portion of your system and refer to the Fire
Drillsectionforinstructionsontestingyoursystemrebells.
XR150, XR350, and XR550 Systems
This Guide covers operation of the XR150, XR350, and XR550 Series
systems.
About Your Security System
The system has been designed with your safety and comfort in
mind. It uses the latest in computer based technology to create
themostadvanced,userfriendlysecurity,re,andaccesscontrol
system available.
The system combines ease of use with a simple to understand DMP
keypad to offer the full range of features requested by today’s
security system owners.
Use the system to turn portions of your protection on or off by
pressing a few keys, or have the system turn on or off automatically
by entering a simple schedule. You can add, delete, and change
personal user codes at any time or check the status of protection
devices in the system.
Parts of the System
There are two main parts to the security system, the keypad and
the keypad User Menu.
LCD Keypad
This is the device we have placed at certain locations throughout
the premises that allow you to turn the system protection on and
off using your personal user code.
Keypad User Menu
The keypad provides a simple User Menu containing all of the
functions you need to fully operate your system such as changing
the time of day or a personal user code.

2 XR150/XR350/XR550 User Guide Introduction
Emergency Evacuation Plans
The National Fire Protection Association recommends that you
establish an emergency evacuation plan to safeguard lives in the
eventofareorotheremergency.
Draw a Floor Plan of Your Home or Business
On a clean sheet of paper, draw the walls, windows, doors, and
stairs. Also draw any obstacles that a person may encounter while
exiting the building such as large furniture or appliances.
Develop Escape Routes
Determine at least two routes the occupants in each room can
take to safely escape. One route can be the most obvious such
as the door. Another can be through a window that can be easily
opened. If the window is high off the ground, an escape ladder
should be provided.
Draw arrows on the oor plan to show escape routes from each
room.
Decide Where to Meet
Prearrange a meeting place outside and away from where
emergency personnel are likely to be working. A neighbor’s house
or across the street in front of the house are good locations. Always
perform a head count to make sure all occupants safely exited.
NEVER ENTER A BURNING BUILDING. If the head count shows one
or more persons missing, give this information immediately to the
authorities. Never enter a building to look for someone.
Practice Your Escape Plans
Devising an escape plan is only the beginning. For the plan to be
effective everyone should practice escape routes from each room.
Early Detection
The best way to survive a re or other emergency is to get out
early. The installation of a re alarm system, with smoke and
carbon monoxide detectors in each room, can greatly decrease
your risk of loss or injury.
Second Floor
Building Front Building Back
First Floor
Fire Escape
Window Ladder

XR150/XR350/XR550 User Guide 3Introduction
DMP Keypads
Your system may have one or more easy to use LCD keypads that allow you to properly operate the system.
32-Character Display
Armed LED
Power LED
Data Entry Digit keys
COMMAND Key
Back Arrow Key
Select Keys
1 2 3 4
9 0 CMD
5 6 7 8
ABC PRINTING
FRI 2:51 AM
Backlit Logo
and Proximity
Antenna
Thinline™/Aqualite™ Keypad
AC Power/Armed LED
Three Panic Icons
32-Character
Display with
Four Touch
Select Areas
Data Entry
Digit Keys
COMMAND KeyBack Arrow Key
Logo
Icon
ABC PRINTING
FRI 2:51 AM
Clear Touch™ Keypad
32-Character Display
Data Entry Digit keys
COMMAND Key
Back Arrow Key
Select Keys
Backlit Logo
and Proximity
Antenna
SMITH RESIDENCE
FRI 12: 51 PM
Thinline™ Wireless Keypad
MON 5:35 AM
DISARMED
Panic
Chime
Check-In
Reset
Interactive Shield
Proximity Card
Reader
Micro SD
Card Slot
Carousel
Menu
Dealer
Logo
Local Weather
Conditions
TODAY
WEDNESDAY
82
98 77
80
LO
74
HI
HI LO
CURRENT
Graphic Touchscreen Keypad

4 XR150/XR350/XR550 User Guide Introduction
Power/Armed LED
Thinline™ and Aqualite™ Keypads:
The Power LED indicates the panel Power status. It is recommended
you contact the service department when the Power LED is off or
blinks.
LED Operation AC Battery
ON (Steady) OK OK
OFF Trouble N/A
BLINKS OK Trouble
The Armed LED is ON steady anytime any burglary protection area
is armed and is OFF when ALL areas are disarmed.
Clear Touch™ and Graphic Touchsreen
Keypads:
The LED indicates the Power and Armed status of the panel.
Depending on the operation, the LED displays in Red or Blue as
listed in the table.
Color and Activity LED Operation
Blue Steady Panel Disarmed, AC Power OK, Battery OK
Blue Blinking Panel Disarmed, AC Power OK, Battery Fault
No Light Panel Disarmed, AC Power Fault, Battery OK
Red Steady Panel Armed, AC Power OK, Battery OK
Red/Blue Alternate Panel Armed, AC Power OK, Battery Fault
Red Blinking Panel Armed, AC Power Fault, Battery OK
The Select keys
Thinline™, Aqualite™ and Wireless Keypads:
There are four keys under the display called the Select keys. These
keys are one of the features that make your system so easy to
operate. They allow you to make selections by pressing the Select
key under a choice shown in the display.
Note: For the purposes of this guide, when instructed to press the
rst Select key, press the far left Select key; the second
Select key is the second from the left; third Select key is
secondfromtheright;andthefourthSelectkeyisthefar
right key.
Clear Touch™ and
Graphic Touchscreen
Keypads:
There are four Select
Areas in the display. These
Select Areas are one of the
features that make your
system so easy to operate.
They allow you to make
selections by touching the
area to choose the item in
the display.
Note: For the purposes of this guide when using Clear Touch™ or
Graphic Touchscreen Keypads, when instructed to press the
rstSelectkey,touchSelectArea1;thesecondSelectkey
touch SelectArea 2; third Select key touch SelectArea 3;
and the fourth Select key touch Select Area 4.
32-Character Display
Select Area 1
Select Area 2 Select Area 3
Select Area 4
Clear Touch/Graphic Touchscreen
Select Areas

XR150/XR350/XR550 User Guide 5Introduction
Power/Armed Logo
Thinline™ Wireless Keypads:
The backlit logo on the keypad indicates the panel armed status
and the keypad power status. Depending on the operation, the
logo displays Red or Green as listed in the table.
Color and Activity Armed Status Keypad Power Status
Green Steady Panel Disarmed AC Power OK, Battery OK
Green Blinking Panel Disarmed AC Power OK, Battery Fault
No Light Panel Disarmed AC Power Fault, Battery OK
Red Steady Panel Armed AC Power OK, Battery OK
Red/Green Alternate Panel Armed AC Power OK, Battery Fault
Red Blinking Panel Armed AC Power Fault, Battery OK
Panic Functions
Your keypad may be set up to send a Panic, Emergency, or Fire
report to the central station. This function is optional. If this
option is programmed for your keypad, icons display below the top
row Select keys/areas.
Thinline™, Aqualite™ and Wireless Keypads:
Press and hold the two Select keys adjacent to the desired icon for
2 seconds, until a beep from the keypad is heard.
Top Row Select Keys
PoliceEmergency Fire
Thinline™/Aqualite™/Thinline™ Icon Keypad Panic Keys
With Shaded Buttons To Indicate Police Panic Keys
Clear Touch™ and Graphic Touchscreen Keypads:
Touch the icon for 2 seconds until a beep is heard.
Clear Touch™ Keypad Panic Icons Graphic Touchscreen Panic Icons
PANIC OPTIONS
PRESS AND HOLD BUT TON TO SEND
FIRE
POLICE EMERGENCY
Police Emergency Fire
Touch Select Areas

6 XR150/XR350/XR550 User Guide Introduction
7/0 Panic Function
Thinline™ and Aqualite™ Keypads:
Thinline™ and Aqualite™ Keypads may also be programmed at
installation to allow the user to initiate an optional Panic alarm by
simultaneously pressing and holding the 7 and 0 (zero) keys. When
the 7 and 0 keys are pressed for a short time, the keypad sends a
Panic alarm report to the central station.
Note: The 7/0 Panic Function is not available on Clear Touch™,
Thinline™ Icon, Wireless, or Graphic Touchscreen keypads.
Common Keys on All Keypads
Data Entry Digit keys
These keys allow you to enter your user code when arming or
disarming or enter other information into the system.
COMMAND (CMD) key
The COMMAND key allows you to advance through the keypad
displays, User Menu, or complete a data entry function.
Back Arrow (<—) key
The Back Arrow (<—) key is used to go back through the keypad
displays while operating your system. You can press the Back Arrow
key to back up through the list of functions in the User Menu or to
erase the last character you entered.
Using the Keypad
Multi-lingual Display Option
Your system may be programmed to display the User Menu and
Status Display text in multiple languages. When the COMMAND
key is pressed, the option to choose the language displays. Select
the language you want to use. The language chosen continues to
display at this keypad until another language is chosen.
Keypad Displays Current Programming
Most User Menu options displayed at the keypad show the currently
selected option in the panel memory. These options are either
shown as a number, a blank, or a NO or YES. To change a number
press any top row Select key. The current option is replaced with a
dash. Press the number(s) on the keypad you want to enter as the
new number for that option.
It is not necessary to enter numbers with leading zeros. The panel
automaticallyrightjustieswhenyoupresstheCOMMAND key. To
change an option that requires a NO or YES response, press the top
row Select key for the response not selected. For example, if the
current option is YES and you want to change it to NO, press the
third Select key. The display changes to NO. Press the COMMAND
key to go to the next option.
Multiple Displays (XR350 and XR550 System
Only)
For some User Menu options, such as Access Areas under User
Proles there are several displays containing lists. For example,
when using Access Areas, areas 1 through 32 display on four
separate displays. First, areas 1 through 8 display. Press the
COMMAND key to display areas 9 through 16. Press the COMMAND
key again to display areas 17 through 25. Press the COMMAND key
one more time to display areas 26 through 32.