DNM DV-22AR User manual

DV-22AR
MM-22LAR
BURNER-RCP 2S
BURNER-RCP 2
DNM INDUSTRY CO.,LTD.
[phone]
[phone]
[email protected]
dnmshock.com
USA
CyclingDeal
[phone]
[email protected]
www.cyclingdeal.com.au
DNM BRAZIL TAKACICLO
LMP.COM.LTDA
[phone]
[phone]
[email protected]
DNM CHINA RUHON
SUSPENSION CO.,LTD
[phone]
[phone]
[email protected]
DNM ITALY-DH+ CONTROL
SYSTEM Via Don Minzoni 88A
[phone]
[phone]
[email protected]
dnmsuspension.it/dnmweb/
28043 Bellinzago Novarese(NO),ltaly
AUSTRALIA
CyclingDeal
[phone]
[email protected]
www.cyclingdeal.com.au

BURNER-RCP 2S

1. Adjust Preload knob to the top of the rear shock.
Following steps are for remove the spring from your shock
if your shocks are equipped with a longer version of rebound adjuster knob,
please remove the knob before remove the spring.
Using 1.5mm Allen key to remove it.
6. Tighten preload knob unl safety ring and spring are ght
5. Re-install the safety ring
2. Forward the spring unl there is space available for remove the safety ring
3. Remove the safety ring
4. Install or replace the spring, and do basic maintenance and cleaning

S

DNM

S
S

1.將避震器上調整螺母旋轉退後，卸除彈簧預載
2.彈簧與上蓋之間，預留可拆出的空間
3.騰出空間後即可拆出
4.安裝或更換彈簧、保養避震器
5.將彈簧置入避震器本身，將上蓋卡入
5.上蓋卡入後，調整螺母使彈簧固定於避震器上，避免鬆動
安裝及更換、拆出彈簧
請依下列步驟安裝及更換、拆出避震器上的彈簧：
若避震器上反彈調整紐(紅色)是如圖示，拆出彈簧前，先使用1.5mm內六角板手
轉出固定反彈調整紐(紅色)上的內六角螺絲，即可拆出；(步驟1接續)
將避震器上調整螺母旋轉退後，直到彈簧另一邊上蓋騰出空間可被拆下為止。

BURNER-RCP 2S