DNM HQS User manual

DNM INDUSTRY CO.,LTD.
[phone]
[phone]
[email protected]
dnmshock.com
USA
CyclingDeal
[phone]
[email protected]
cyclingdeal.com.au
DNM CHINA RUHON
SUSPENSION CO.,LTD
[phone]
[phone]
[email protected]
AUSTRALIA
CyclingDeal
[phone]
[email protected]
cyclingdeal.com.au
DNM ITALY-DH+ CONTROL
SYSTEM Via Don Minzoni 88A
[phone]
[phone]
[email protected]
dnmsuspension.it/dnmweb/

CSP
SP-22
CSD
CSD
SP-22
CSP
27.2 mm
380/125 mm
400/125 mm
430 g

CSP
SP-22

CSD
Please cut the proper length of outer tube.
Second make Stainless steel wire through the outer tube.
Then place the CSD into your bike frame.

handle bar

4.Apply proper
lubrication.
use lubrication that contaion grease.
1.Apply lubrication again
When maintenance, remove the dust wiper,
clean and then lubricaon on the surface of tube.
Then apply proper amount of lubricaon on the surface
and move the cap back and forth evenly.
Apply lubricaon again on the surface. Tighten the dust
wiper cap with the seat post. Clean the appearance
as well. All Steps is completed.

CSP
SP-22

CSD
先裁剪適當的線控外管，並裝入線控鋼線，再
將CSD置入車架上固定鎖緊。
線管
內線
1.將線管推至槽內

車手把