Do Beauty STM09C User manual

Product Manual
PEARL FACIAL STEAMER WITH OZONE
(STM09C)

This traditional facial steamer has a light-weight, present day and useful design. The steamer has
both steam and ozone function, which gives a high-quality method of cleansing and sterilizing the
pores and skin.The vapor steam includes rich and diverse energetic hydronium ion that can stimulate
blood circulation and deliver the water detail in the cells in turn nourishing and moistening the pores
and skin whilst coinstantaneous can sterilize the skin. When used in conjunction with massage it can
create the perfect impact.
FEATURES
FUNCTIONS OF STEAMER
02
OVERVIEW
nSeparate Ozone and Steam Switches
nSteamer can operate also without the Ozone
nOzone (Oxygen ionic vapours) provide great sterilization and cleaning of the skin.
nAuto Shut-Off when water level is low
nAdjustable Arm
nAdjustable Height
nWater Jar
nStable and Sturdy Frame
nEasy glide wheels for smooth movement
nSoften the outer cells on the skin surface and prepare skin for next step in facial procedure;
nOpens up the pores to make it easier to cleanse deeper layers of the skin and to allow penetration of
products into skins surface;
nThe mist can seep into the pores to soften the accrued grease, blackhead, beauty residues in the
pores making removal of these substances easier;
nThe mist can help the pores excrete the pollutants;
nPromote the blood circulate, supplement the water in the cells, and improve the mobile
metabolism and auto repair feature.
PARTS

03
ASSEMBLY
PRECAUTIONS
nBolt the lower pillar onto the 4-star base using the base claw, then insert the middle pillar and fix it
into the lower pillar using the fixing nut.
nFit the top pillar onto the middle pillar.
nAdjust the height of the steamer as necessary, using the fixing nut.
nFit the silicon sealer ring into position on the top rim of the glass water reservoir jar and fit the
water jar into position. Make sure it is securely fitted into the cradle.
nSlide the jar support plate into place beneath the jar and tighten it to fit securely, using the screw on
the bottom of the support plate.
HOW TO USE YOUR STEAMER
nPour distilled water into water jar through water mouth however do not fill above the water upper
line.
nPress on/off switch, the indicator light will come on, and the machine is prepped for work.
nPress the steam/vapor button then the steam/vapor indicator light will come on and the element
will begin to heat up. As the water heats steam is produced.
nPress ozone button then the ozone indicator light will come on, ozone function will start
immediately.
nIf the water within the water jar drops below the water low mark line the power will automatically
switch off.
nMachine should be placed an appropriate location where the vapor steam can freely blow towards
clients chin to every a part of face.
nSteam can be applied for between 5-20mins, longer if required, depending on the service.
nWhen you move this machine, please keep it level, keep away from the vibration and collision.
nIt is not recommended to run for more than 25 mins per service. Over extended use can affect the
longevity of the water jar.
nIf a buildup forms on the heating element, cleanse using the vinegar mix recommended previously.
n Pick out the corresponding running energy supply in step with the mark on the system.
nDo not use for any other purpose.
nDo not put oil in steamer jar.
nAvoid any liquid getting into the machine body! As it may damage the electrical circuit of machine
or harm the operator.

04
CLEANING AND MAINTENANCE
nThe external surfaces of the steamer can be cleaned with a gentle fabric and soapy water or a slight
non-abrasive floor cleaning agent.
nThe water jar should be emptied and cleaned with soapy water at the end of each day.
nIf water has discolored or left a residue inside the jar, the jar can be filled with white vinegar and
water solution (1 part vinegar to 4 parts water) and left to soak. It is very important that the vinegar
solution is thoroughly washed out of the jar before using the steamer again. If any residue remains
the steamer may spit water whilst it is next used, posing a hazard to the client.
nIf the heating element requires cleansing, again fill the jar with 1 part vinegar and 4 parts water
attach to the unit and leave to soak overnight. This may remove any build-up of mineral scale from
the element. Please ensure that the vinegar mix is completely removed from the heating element
and the jar before reusing the steamer, as said above.
nWhen attaching the jar, ensure that the silicon sealer ring is in place, and the jar is fitted firmly to
the cradle. Failure to achieve this may also cause the water to overflow while boiling, or intervene
with the steam course.
nWhen the ozone function is turned on there should be an obvious increase in the amount of steam
produced. If the ozone function does appear to be working, the UV lamp may need to be replaced.
The life expectancy of each lamp is round 2000 hours.
nReplacement of the lamp should only be done by a qualified trades person such as an electrician or
accepted electrical repairer.
SPECIFICATIONS
PEARL FACIAL STEAMER WITHOZONE (STM99C)
Size
Hz.
Temp.
Net Weight
Gross Weight
50/60Hz.
o
5-40 C
92*41*28cm
5kg
7.6kg