
16
Easy Search/Contents/Precautions
General Notes
cDo not allow the devices to become wet.
The FOMA terminal, battery pack, adapter/charger
and the FOMA card (UIM) are not waterproof. Do not
use them in humid locations such as bathrooms, and
avoid exposing them to rain. If you carry the FOMA
terminal close to your skin, sweat may cause internal
components to corrode and result in malfunction. The
FOMA terminal cannot be repaired in the following
cases: the water exposure detection sticker shows
water exposure; tests determine that corrosion has
occurred due to water exposure, condensation, or
perspiration. These cases are not covered by the
warranty, and any repairs that may be possible will be
carried out at the subscriber’s expense.
cWipe with a soft, dry cloth (such as a cloth
designed for glasses).
aThe surface of the FOMA terminal LCD may be
coated to improve the visibility of the color
display. Rubbing the LCD of the FOMA terminal
with a dry cloth to clean it may scratch the LCD
surface. Handle the FOMA terminal carefully and
clean it using a soft dry cloth (such as a cloth
used for glasses). The LCD coating may peel off
or stain if moisture or dirt is left on the surface for
a long period.
aNever use chemicals such as alcohol, thinners,
benzene or detergents as these agents may
erase the printing on the FOMA terminal or
cause discoloration.
cOccasionally clean the connection
terminals with a dry cotton bud.
Soiled connection terminals may result in poor
connections and loss of power. Also, as it may
cause insufficient charging, clean the terminal with
a dry cloth or cotton bud when it is dirty.
cDo not place the FOMA terminal near an air
conditioning vent.
Condensation may form due to rapid changes in
temperature, and this may cause internal corrosion
and malfunction.
cDo not throw strike or put excessive
pressure on the FOMA terminal or battery.
Do not put the FOMA terminal in a bag filled with
many objects or sit down with it in a hip pocket.
Excessive pressure may result in malfunction or
damage to the LCD, internal circuit or the battery
pack. Also, if an external device is connected to the
external connector, excessive pressure may cause
connector breakage or malfunction.
cRead the separate manuals supplied with
the FOMA terminal, adapter/charger and
desktop holder carefully.
cDo not scratch the display with metallic
objects.
Doing so may cause scratches, malfunction or
damage.
cDo not press the surface of the touchscreen
firmly or operate the touchscreen with
sharp edge objects, such as fingernails,
ballpoint pens, and pins.
Doing so may cause touchscreen breakage.
Handling the FOMA Terminal
cAvoid using the FOMA terminal in extremely
high or low temperatures.
The ambient temperature of the room should be
5°C - 35°C with humidity 45% - 85%.
cReception may be affected if you use your
FOMA terminal near a landline phone,
television, or radio in use. Use the FOMA
terminal away from such devices.
cPlease keep a separate record of the
information you have registered in your
FOMA terminal.
Please be aware that DOCOMO bears no
obligation or responsibility in the event that data is
altered or lost.
cWhen connecting an external device to the
external connector (earphone/microphone
terminal), do not insert at an angle or pull
the code.
Doing so may cause malfunction or damage.
cDo not fold the FOMA terminal with the
strap pinched between the folding parts.
Doing so may cause malfunction or damage.
cIt is normal for the FOMA terminal to
become warm while being used or charged.
This is not a malfunction, Keep using it.
cDo not leave the camera exposed to direct
sunlight.
Doing so may discolor or burn the components of
the camera.
cKeep the external connector cap and
microSD card slot cap closed when not in
use.
Failure to observe this precaution may cause
malfunction due to dust or water getting in.
cDo not use FOMA terminal with the back
cover removed.
Doing so may cause the battery pack to fall out, or
cause malfunction or damage.
cDo not put an extremely-thick sticker, etc.
on the display, keys or keypads.
Doing so may cause malfunction.
cDo not put a label or sticker on the back of
the FOMA terminal display.
The label or sticker may interfere when the FOMA
terminal is opened/closed, and cause malfunction
or damage.
cDo not remove the microSD card or turn off
the power while in use.
Doing so may cause data loss or malfunction.
Notes on Handling