3
USER GUIDE
Ultramics are ultrasound microphones, with an integrated sensor
and analog to digital converter. Three version are available with 192
KHz, 200 kHz & 250 KHz sampling rate. The USB 2,0 Full speed port
allows an easy connection to smartphones, tablets, PC or Mac
computers. The device is recognized as a standard USB audio
microphone, so no driver installation is required!
It appears as a single channel audio input device. However, if
recording in stereo, the two channels will appear identical.
Sensor
The MEMS (Micro Electro-Mechanical Systems) sensor is very
sensitive, with a good signal/noise ratio and small form factor.
Connections & settings
Connect Ultramic to your PC, iPhone, iPad, Android smartphone or
tablet with a MINI USB cable and if needed an adapter, and it will
immediately be recognized as a new audio input.
In your preferred sound recording software, select the new audio
input, and choose the sampling frequency.