Dolphin GuideReader Pod User manual

Quick Start Guide

3
Contents
GuideReader Pod ..............................................05
What’s In The Box? .......................................... 05
Product Overview ............................................ 06
Using Your GuideReader Pod ..........................08
Connecting GuideReader Pod
To Your Television ..................................... 08
Turning Your GuideReader Pod On ........ 10
Displaying GuideReader Pod
On Your Television Screen ...................... 10
Turning Your GuideReader Pod O ........11
Return To Watching
Television Programmes ...........................11
Using The Dolphin Remote ..................... 12
Connecting To The Internet ........................... 14
Adding Additional Storage ..............................14
Emergency Restart .......................................... 15

4
General Information .............................. 16
Important Safety Information ..... 16
Licence And Warranty ................... 18
Notice ............................................... 18
Contents continued

5
• GuideReader Pod
• Power supply DC 5V/3A
• HDMI cable (1 metre)
• Dolphin Remote
• 2 x AAA batteries (for Dolphin Remote)
• Quick start guide
• 32GB Micro SD card pre-inserted
GuideReader Pod
This quick start guide will help you get to
know your GuideReader Pod and explain
how to get the most out of all of its great
features.
What’s In The Box?
Please ensure the following items are
present in the box. If an item is missing
then please contact your supplier as soon as
possible.

6
6 4578
1
Product Overview
3
2

7
Dolphin
Remote
See page 12 for a
detailed overview
and user guide.
Power button
USB ports
Micro SD card slot
(32GB Micro SD card
pre-inserted)
Power port
Mini USB port
HDMI port
Ethernet port
3.5mm stereo
headphone port
1
2
37
6
8
4
5

8
Using Your GuideReader Pod
Connecting GuideReader Pod to your
television
Your GuideReader Pod comes with a cable to
connect to your television set. This is called
a HDMI cable, and it ts into the HDMI port
in the back of most TVs. For help nding
the HDMI port on your TV, please refer
to your TV user manual or ask a friend or
family member.
To use the supplied cables, your GuideReader
Pod needs to be within 1 metre of your TV
and near to a wall socket. To connect
GuideReader Pod to your TV:
1. Connect one end
of the HDMI cable
into the HDMI port
at the back of
your GuideReader
Pod
6
6

9
2. Connect the other
end of the HDMI
cable into an
available HDMI
port in the back of
your TV
3. Connect the Power
cable into the
Power port at
the back of your
GuideReader Pod
4. Connect the Power
cable’s plug into
a wall socket and
switch the power
on.
Your GuideReader
Pod is now ready
to use.
4

10
Turning your GuideReader Pod on
Press the Power button on your
GuideReader Pod. A blue light will appear
on the Power button and GuideReader will
start to load. GuideReader will take up to a
minute to load.
1
Displaying GuideReader on your
television screen
Please ensure your GuideReader Pod is
correctly connected to your television and
switched on as outlined above. Please also
ensure you have your TV remote control
to hand as it will be required to display
GuideReader on your TV screen.
To display GuideReader on your TV screen:
1. Turn your TV on. Your usual TV channels
will be displayed.
2. Switch your TV output to HDMI. With
most TVs, you can change the output
using the ‘AV’, ‘source’ or ‘input’ button
on your TV remote control.