Domotec DSC21 User manual

MODEL: DSC21
USER MANUAL
Portable Multi Steamer

2
SAVE THESE INSTRUCTIONS
CAUTION - To reduce the risk of fire, electric shock, or injury:
!To provide continued protection against risk of electric shock connect to properly grounded
outlets only.
!Check that the main voltage corresponds to the voltage indicated on the rating label.
!This product is designed for domestic use only.
!Do not use outdoors.
!Do not leave the Steam Cleaner unattended while plugged in. Unplug the electrical cord when
not in use and before servicing.
!Do not allow to be used as a toy. Close attention is necessary when used near children, pets or
plants.
!The Steam Cleaner is not intended for use by young children or infirm persons without
supervision. Young children should be supervised to ensure that they do not play with the
appliance.
!Do not immerse the Steam Cleaner into water or other liquids.
!Never direct steam towards people, animals or plants, or equipment containing
components.
!Always unplug the power cord from the electrical socket when filling the Steamer.
!Do not use with damaged cord or plug. If the Steam Cleaner is not working as it should, has
been dropped, damaged, left outdoors, or immersed into water, return it to
before continuing use. If the supply cord is damaged, it must be replaced by
.
!Do not pull or carry by cord, use cord as handle, close a door on cord, or pull cord around sharp
edges or corners. Keep cord away from heated surfaces.
!Never force the plug into an outlet.
!Do not use extension cords or outlets with inadequate current carrying capacity.
!Unplug after use. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
!Do not insert any objects into openings. Do not use with any opening blocked.
!Do not handle plug or the Steam Cleaner with wet hands or operate without shoes.
!Do not touch the hot surfaces during use. Allow the accessories to cool down before changing
them.
!Keep your work area well lighted.
!Never put desiccating, aromatic, alcoholic or detergent products into the Steamer as this may
damage it or make it unsafe for use.
!Never block the steam openings of the product or place it on a soft surface, where the steam
openings may be blocked, Keep the steam openings free of lint, hair, and the like.
!When filling with water use Measuring Cup. Do not try to overfill.
!Follow these steps before unscrewing the Filler Cap:
1) Unplug the power supply
2) Slowly start to unscrew the Filler Cap, wait a few seconds, then screw it off completely.
3) Do not open water tank while in use.
!Use only as described in this manual. Use only manufacturer's recommended accessories and
service agent.
electrical
a qualified service
engineer a qualified
service engineer
and allow to cool down.
WARNING
DANGER OF SCALDING
IMPORTANT SAFEGUARDS
When using an electric appliance, basic precautions should always be followed:
READ ALL INSTRUCTIONS BEFORE USING THIS STEAMER

3
KEY FEATURES
1. Handle
2. Safety Filler Cap
3. Locking Trigger Button
4. Trigger Release
5. Deluxe Hose
6. Steam Gun
7. Steam Trigger
8. Extension Tubes (2pcs)
9. Connector
10. Deluxe Floor Brush
11. Floorcotton cloth (2pcs)
12. Concentrator tool
13. Fabric Brush
14. Glass Squeegee
15. Round Brush (2pcs)
16. Funnel
17. Refill Cup(500ml)
18.Fabric Brush Pad
19. Shoulder Strap
20. Shoulder Strap Hook
21. Steam unit
22. Indicator Light
1
3
5
6
7
8
9
10
12
11
13
14
15
16 17
18 19
2
22
4
20
21
DESCRIPTION
Thank you and congratulations for choosing the Portable Multi Steam cleaner.
Your Steam Cleaner utilizes pressurized steam to remove tough grease, dirt
and grime. Steam is nature's purest and most powerful cleaner for safely
cleaning all hard surfaces in your home without harsh chemicals, thus being
perfectly ecological.
The appliance has various attachments so that it can be used for many
purposes such as:
1. Clean upholstery, sealed grout, bathroom/kitchen tile, stovetops.
2. Easy to clean difficult to reach areas with the extension tubes and
Concentrator tool.
3. Ideal for windows, mirrors, glass doors, etc.
4. Clean fabrics, window coverings, pillows, bedding etc.
5. Clean hard surface areas such as counters, sinks, shower door tracks, etc.

4
THERE IS A DANGER OF SCALDING. YOU MUST NEVERATTEMPT TO
REMOVE THE SAFETY CAP WHILE THE STEAM CLEANER IS
SWITCHED ON OR UNDER PRESSURE. THE TOOLS AND HOSE WILL
GET HOT DURING USE. ALLOW THE TOOLS TO COOL DOWN
BEFORE CHANGING THEM WHILE THE STEAM CLEANER IS BEING
USED.
WARNING!
DO NOT OVERFILL THE TANK. USE ONLY 650ml WATER. NEVER PUT
DESCALING, AROMATIC, ALCOHOLIC OR DETERGENT PRODUCTS
INTO THE STEAM CLEANER, AS THIS MAY DAMAGE IT OR MAKE IT
UNSAFE FOR USE.
WARNING!
FILLING THE STEAM CLEANER WITH WATER
The steam cleaner tank has a capacity of 650ml.
Check that the steam cleaner is disconnected
from the mains supply.
Press the Locking Trigger Button until any
pressure has been released.
Unscrew the safety cap.
Check that there is no residual water in the
steam cleaner. Always empty the unit first to
ensure that only the correct measured volume
of water can then be added.
Make sure the steam cleaner is on a stable flat
surface.
Fill the measuring cup with water of 500ml and
the tank with a maximum of 650ml. It is not
necessary to use distilled water.
Using the funnel, pour the water into the steam
cleaner.
Screw the safety cap back onto the steam cleaner and tighten by hand.

5
NOTE: DO NOT LEAVE THE STEAM CLEANER UNATTENDED
DURING THE HEATING-UP PERIOD.
Retaining lug Aperture
Tool release
button
SWITCHING ON AND OFF
Mains Power
Plug the 3-pin mains plug into the mains supply.
The Indicator light will come on to show that the steamer is heating the
water.
Steam will be available after approximately 3 to 4 minutes.
The steamer will provide continuous hot steam for approximately 20
minutes for each fill of the tank. (650ml).
To switch Off, unplug the power cable, the Indicator Light will go out.
USING THE STEAM CLEANER
Fitting the Accessory Tools
The tools can be fitted directly to the Gun, or to the end of the extension
tubes. The two extension tubes can be fitted together to give extra reach if
required.
To fit the tools or extension tubes first make sure that the aperture in the
tool is aligned with the retaining lug on the Gun (or extension tube if fitted).
Push the tool or extension tube onto the end of the Gun (or extension tube
if fitted) until it clicks into place and is held by the retaining lug.
To remove a tool or extension tube from the Gun, press and hold the tool
release button and pull the tool off.