Dongguan Grand Plan Mold Industry Co., Ltd. SM-1088 User manual

Instruction Manual
Multi-functional Kitchen Machine
Model: SM-1088 / SM-1088M / SM-1088G / SM-1088B
Company: Dongguan Grand Plan Mold Industry Co., Ltd.
Address: No,8, Feida Road Guancang District, Zhangmutou, 523629
Dongguan, Guangdong, PEOPLE’S REPUBLIC of China
Please read these user instructions carefully before use. They are a
constituent parts of the appliance and must be kept to hand at all times
Multi-functional Kitchen Machine (Name of parts)
1. Removeable cover 1
9. Unlock lever
17. Control panel
2. Blender Jug
10. Food Pusher
18. Pulse button (Low speed)
3. Removeable cover 2
11. Cone
19. On/Off button
4. Hopper plate
12. Former
20. Adjusting/selecting switch
5. Mincing Tube
13. Separator
21. Mixing Beater
6. Splash guard
14. Sausage Fittings
7. Mixing Bowl
15. Balloon whisk
8. Pulse button (High
speed)
16. Dough Hook

Important Safety Information
The operating instructions are a constituent part of this product. They
contain important information about safety, use and disposal. Familiarize
yourself with all the operating and safety instructions before using the
product. Use the product only as described and for the stated spheres of
application.
If you pass the product on to a third party, always pass on all the
documentation as wall.
Read this instruction carefully and use the product under the directions of
instruction. There is a potential injury from the misuse.
Appliance is not intended for use at altitudes exceeding 2000m.
Under no circumstances should water or other liquids get into the base unit.
For this reason:
- Never use it outdoors
- Never immerse the base unit in water
- Never place containers filled with liquid, such as drinking glasses, vases
etc. on the appliance
- Never use in very humid environments
- Never use in immediate vicinity of a kitchen sink, bath, shower or a
swimming pool, as water may splash into the appliance.
If liquid should enter the appliance, unplug the mains plug immediately and
have the appliance repaired by a qualified technician.
Ensure that the mains cable is not kniked, twisted or crushed.
Ensure that the mains cable is not damaged on sharp edges.
Keep the mains cord away from hot surfaces (such as stove eyes).
Always pull the mains cord out by the plug. Never pull it by the cord it self.
Insert the mains plug into a wall socket that complies with the technical
data.
The appliance must only be set up on a firm, level, dry and non-flammable
surface.
Check that the power socket is easily accessible so that you can pull out the
mains plug quickly if necessary.
If there should be any malfunctions, the appliance may only be repaired by
our Service Centre.
Repairs should only be carried out in a qualified workshop.
Children shall not play with the appliance.
This appliance shall not be used by children. Keep the appliance and its
cord out of reach of children.
The appliance may only to be used for its intended purpose according to
these operating instructions.
Never operate the device empty.
During operation, avoid contact with the moving parts of the appliance such
as the blades of the blender jug 2, the dough hook 16, balloon whisk 15 or
beater 21. Your hands or hair could be drawn into the appliance, leading to
injuries. Only ever switch the appliance on if you have correctly fitted the
splash guard 6when using the mixing bowl 7or the lid when using the
blender jug 2.
If you are not going to use the appliance for a while, remove the plug from
wall socket. Only then is the appliance completely free of current.
Always remove the power supply plug from the mains socket before starting
to clean the appliance.
If the supply cord is damaged, it must be replaced by the manufacturer or
its service agent or a similarly qualified person in order to avoid a hazard.
Use caution when handling the sharp cutting blades, when emptying the jar
and when cleaning.
Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
Only use one function at a time!
If the mixing bowl 7 is overfilled, boiling water may be ejected.
The Mixing bowl 7is only to be used with stand provided.
Caution –Ensure that the mixing bowl 7 is switched off before removing it
from its stand.
Note –Avoid spillage on the connector.
There is potential injury from misuse.
Be careful, the surface of mixing bowl 7is subject to residual heat after use,
don‟t touch
Always disconnect the appliance from the supply if it is left unattended and
before assembling, disassembling or cleaning.
The care shall be taken when handling the sharp cutting blades, emptying

the bowl and during cleaning.
Caution: Ensure that the blender Jug is switched off before removing it from
the stand.
Always operate the device with a closed lid. Always wait for the blades to
come to a standstill before removing the lid.
Appliances can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe
way and if they understand the hazards involved.
The heating function cannot be used separately.

WARNING: AFTER DETACHING THE ACCESSORY, DO NOT TOUCH
THE MOVING SHAFT.
: The temperature of accessible surfaces may be high when the
appliance is operating.
This appliance is intended to be used in household and similar applications
such as:
–staff kitchen areas in shops, offices and other working environments;
–farm houses;
–by clients in hotels, motels and other residential type environments;
–bed and breakfast type environments.
Never operate the appliance continuously for more than 5 minutes at rated
power.
The appliance should be cool down to the room temperature after each
process.
Be careful is hot liquid is poured into the mixing bowl 7 or blender Jug 2 as it
can be ejected out of the appliance due to a sudden steaming.
Technical Data
Power supply: 110-120V, 60Hz
Power consumption:
1200W [Motor + Heater]
1000W [Motor]
875W [Heater]
Maximum capacity：
Mixing bowl (motor)━7.0 liters
Mixing bowl (Cooking, motor + heater) ━3.0 liters
Blender Jug ━1.5 liters
Balloon whisk ━16
Operation
(8) Pulse button (High speed)
(17) Control panel
(18) Pulse button (Low speed)
(19) On/Off button
(20)Adjusting/selecting switch
Note:
1. The knob is steplessly adjustable.
By turning it clockwise a higher
temperature/speed/time is set, by
turning it anticlockwise a lower
temperature/speed/time will be
set.
2. Push the Fingerprints after setting
for confimation.

Control panel
(22) LED indicoator
(23) Display
(24)Timer
(25) Heating function
(26) Speed setting
(27) START / STOP
(28)Auto Mode Control
Auto Mode
DM: Knead dough mode
MB: Mixing mode
EW: Whipping egg whites mode
MG: Mincing meat mode
BL: Blender mode
CL: Crushed ice mode
ST1: Cooking 1 mode
ST2: Cooking 2 mode
ST3: Cooking 3 mode
Button instruction
(8). Pulse button (high speed)
Pressthe pulse button, the appliance will take place at speed 10 as long
as the pulse button is held down.
(18). Pulse button (low speed)
Press the pulse button, the appliance will take place at speed 1 as long
as the pulse button is held down.
(19). On/Off button
Press the On/Off button to switch the display on or off.
(20). Adjusting/selecting switch
The knob is steplessly adjustable. By turning it clockwise a higher
temperature/speed/time is set, by turning it anticlockwise a lower
temperature/speed/time will be set.
(23). Display
Whiteletter on a blue lights background. Display the technical parameters and
working state of the appliance.
(24). Timer
If press this button in standby condition, the LED will flicker, now the
appliance gets into timer mode.
Time shows in “00:00”. The 1st “00” means the hour, and 2nd “00”
means the minute.The maximum setting time is 1 hours.
(25). Temperature Control
If press this button in standby condition, the LED will flicker, now the
appliance gets into heating setting mode.
Adjust the Einstellen Schalter/Auswahlschalter each time, the
temperature shows on LCD will increase/decrease by 5°C
Temperature range: 20°C-140°C.
(26). Speed setting
If press this button in standby condition, the LED will flicker, now the
appliance gets into speed setting mode.
(27). START / STOP
If you press this button in the setting mode, then the appliance will
start.
In working mode, press this button, then the appliance remember
the setting information, turning to pause.
(28). Auto Mode Control
If press this button in standby condition, the LED will flicker, now
the appliance gets intoAuto Mode.
When the mixing bowl‟s temperature exceeds 60°C with rotation speed over level
3, the appliance will automatically change the speed to level 3 in order to avoid
scalding by the splashed food.

ST mode
1. ST1 mode:
Speed: 1
The appliance will be stop working after 10 minutes when the when the mixing
bowl„s temperature exceeds 60°C
3. ST2 mode:
Speed; 1
Operating time: 5 s On / 5 s Off
The appliance will be stop working after 10 minutes when the when the mixing
bowl„s temperature exceeds 100°C
4. ST3 mode:
Speed; 1
Operating time: 10 s On / 30 s Off
The appliance will be stop working after 3 minutes when the when the mixing
bowl„s temperature exceeds 100°C
Trouble-Shooing
The appliance has self-diagnostic function, namely when the fault happens, the fault
information will be shown. if the fault still cannot be solved by unplugging the plug
and connecting it again, Please contact our customer service department，And tell
us the Fault code displayed on the screen.
Shows fault code and eliminating methods:
Fault
code
Code meaning
Methods to solve them
E:01
Removeable cover 2 wasn‟t
installed
Make sure the removeable
cover 2 is installed.
E:02
The multifunction head wasn‟t
installed correctly.
Make sure the multifunction
head is installed correctly.
E:03
The mixing bowl wasn‟t installed.
Make sure the mixing bowl is
installed correctly.
E:04
Mixing bowl overheating
Waiting until the mixing bowl
temperature falls down to
room temperature.
E:05
Temperature sensor is open
Install the mixing bowl and
make sure the mixing bowl
and themachine is installed in
place. Unplug the machine
and then reconnect it to the
power supply
Assembling the appliance
1. Press the unlock lever 9and swing up the drive arm.
2. To fit the mixing bowl 7, insert it in the base unit.
Caution!
Never use the mixing bowl 7 without the splash guard 6in position. Otherwise food
might be ejected.
3. Fit the splash guard 6onto the drive arm from below.
4. Press on the splash guard 6until it engages.
5. Select the appropriate attachment:
Dough hook 16: For heavy dough, e.g. break dough
Balloon whisk 15: For whipping cream, beating egg whites, etc.
Beater 21: For medium to light dough/batter, e.g. batter for (pan) cakes.
6. Fit the attachement into the appropriate opening in the drive arm from below.
When doing so, make sure that the little lugs on the shaft of the attachment are
inserted into the crosswise slot of the opening.
7. Press the attachement lightly in and turn clockwise until it engages.
8. Press the unlock level 9and swing the drive arm down into the working position.
The appliance is now ready to use.
Fitting the blender jug 2:
1. Press the unlock button for removeable cover 2 3 to the left.
2. Take the removeable cover 2 3off.
3. Position the blender jug 2so that the little nib points to the open padlock symbol.
4. Turn the blender jug 2 clockwise until it engages. The nib is now pointing to the
closed padlock symbol.
9. Take off the blender jar, and set the Caudal cover to the machine.
Fitting mincing Tube 5:
1. Hold the body of the cutter housing, and be sure that the largest opening of the
feed tube is upward.

2. Insert the worm shaft into the cutter housing.
3. Fit the cutter blade on the shaft with the cutting edge upward.
3. Place the medium grinding disc, fine grinding disc or coarse grinding disc
(depending on your need) onto the worm shaft.
4. Install the screw tightly.
5. Put the assembled cutter housing into the outlet of the multifunction head by
turning it anti-clockwise in the vertical position (a click should be heard).
6. Place the tray on the upright part of the cutter housing.
7. Now the appliance is ready for mincing.
Dismantle appliance
1. Press the unlock lever 9and swing up the drive arm.
2. To remove an attachment, press lightly in again and unlock by turning
anticlockwise slightly.
3. Remove the attachment.
4. To remove the splash guard 6, pull it downwards. When doing so, first pull
the splash guard 6down at the back slightly.
5. Unlock the mixing bowl 7by rotating slightly in a clockwise direction.
6. Remove the mixing bowl 7.
7. Press the unlock lever 9and swing the drive arm down into the working
position.
Removing the blender jug 2:
1. Turn the blender jug 2anti-clockwise until that the little nib points to the
open padlock symbol.
2. Remove the blender jug 2.
3. Put the removeable cover 2 3back on.
Removing the mincing Tube 5:
Reverse operation in step “Fitting mincing Tube 5”above.
Operation Guide
knead dough:
1. The dough hook or mixing blade should be used.
2. Suggestion flour and water at a ratio of 5 ：3.
3. When filling the mixing bowl, please ensure that the maximum quantity is not
exceeded.
4. Maximum quantity of flour is 1500g.
5. “DM” mode should be sued.
6. Use No longer than 4 minutes continuously at a time.
7. Let the appliance cool down to room temperature after each process.
Mixing shakes, cocktails or other liquids:
1. The mixing beater should be used.
2. Mix the ingredients according to the available recipe, from speed 1 to 6 for
about 4minutes.
3. Do not exceed the maximum quantity for the mixing bowl.
4. Use No longer than 4 minutes continuously at a time.
5. Let the appliance cool down to room temperature after each process.
Whipping egg whites or cream:
1. The egg whisk should be used.
2. Used “ EW” setting mode.
3. Maximum quantity 16 eggs.
4. For whipped cream, whip 250ml fresh cream at “EW” setting mode.
5. When filling the mixing bowl with fresh milk, cream or other ingredients, please

ensure that the maximum quantity is not exceeded.
6. Use No longer than 4 minutes continuously at a time.
7. Let the appliance cool down to room temperature before continue to use.
Mincing meat:
1. Cut all foods into pieces ( Sinewless, boneless and fatless beef or pork is
recommended, approximately size :(20 mm x 20 mm x 60 mm) so that they fit easily
into the Hopper plate (4) opening.
2. Used “ MG” setting mode.
3. Feed foods into the hopper plate (4). Use for it only the food pusher (10).
4.After use switch the unit off and unplug it from the power supply.
5.Use No longer than 15 minutes continuously at a time.
6.Let the appliance cool down to room temperature before continue to use.
Use Blender function
1. Place the foodstuff you wish to process into the Blender Jug.
2. This appliance operates at max. power for blender function with mixture of 600g
carrots + 900g water in speed setting Max.
3. Put the glass cover on the Blender Jug and close securely. Place the measuring
cup into the hole in the glass cover and turn clockwise to lock.
4. Mode setting Use
“BL” setting for mixing liquids and solid foodstuffs
“CI”setting for crushed ice
“” setting for ice crushing & short, powerful impulse movements
“”setting for low speed to move
5. Use No longer than 3 minutes continuously at a time for the “BL” setting.
8. Use No longer than 65 seconds continuously at a time for the “CI” setting.
9. Let the appliance cool down to room temperature before continue to use.
Cooking
1. Always operate the device with a closed lid.
2. Use the “ST” mode or “AUTO” mode. For more settings and operations
of the appliance, please refer to “Operation”.
3. The food should not exceed the maxi capacity of 3.0L.
4. Pay attention to the capacity mark on the mixing bowl.
5. Open the lid until the food in the mixing bowl stops rotating, especially
during speed 3 or even higher speed.
6. When the food in the mixing bowl is high-temperature or boiling, please
do not use speed 3 or higher speed.
7. Do not touch the mixing bowl when processing hot food of more than
60°C
8. Pay attention that vapor will outflow through the cover top or sides.
4. Hopper plate
M5. Sausage Holder
M10. Meat Ring Holder
M1. MincingTube
M6. Sausage Fittings
M11. Meat Ring Fittings
M2. Wear Mat
M7. Coarse Blade Plate
M12. Mincing Tube cover
M3. WormAxis
M8. Medium-Blade Plate
10. Food Pusher
M4. Mince Blade
M9. Pore Blade Plate
Food MincerAssembly

9. Let the appliance cool down to room temperature before continue to use.
Cleaning
1. Before using for the first time, clean all parts of the accessories with
soapy water. Rinse and dry.
2. Before you clean the appliance, switch the appliance off and remove the
plug from the socket.
3. After the stainless steel bowl cool down, remove the bowl. Clean the
inside and outside of the bowl. Always keep the contact pins at the
bottom of the bowl clean and dry. Only Wipe the contact pins with a wet
cloth!
4. Unscrew the screw ring and remove all parts of the attachment. Don‟t
clean the metal bowl and blade in the dishwasher!
5. Never use pointed or sharp objects for cleaning as this may damage
functional parts or affect the safety of the appliance.
6. The blade is very sharp! Handle it with care!
7. Wash all parts except main body and mixing bowl in hot soapy water.
Clean them immediately after use. Rinse them with clear hot water and
dry them immediately.
8. We advise you to lubricate the blade with some vegetable oil.
9. Only wipe the main appliance with a damp soft cloth!
10. If the bowl and blade is hard to clean. You may add some hot soapy
water in the bowl and run the appliance at speed 1 for few seconds.
11. How to clean the main body and mixing bowl.
Please pull out the plug from the outlet before cleaning.
Clean it with soft cloth and moderate detergent. Use the water carefully
so as to prevent the inside of the appliance from moisture.
Parts difference of a mode and Packing list
SM-1088:
Main body 1 set
Mixing bowl 1 set
Mixing beater 1 set
Dough hook 1 set
Egg whisk 1 set
Instruction manual 1 pc
SM-1088M:
Main body 1 set
Mixing bowl 1 set
Mixing beater 1 set
Dough hook 1 set
Egg whisk 1 set
Blender Jar 1 set
Food mincer 1 set
Instruction manual 1 pc
SM-1088G:
Main body 1 set
Mixing bowl 1 set
Mixing beater 1 set
Dough hook 1 set
Egg whisk 1 set
Food mincer 1 set
Instruction manual 1 pc
SM-1088B:
Main body 1 set
Mixing bowl 1 set
Mixing beater 1 set
Dough hook 1 set
Egg whisk 1 set
Blender Jar 1 set
Instruction manual 1 pc

At the end of its service life, this product may not be
disposed of in the normal household waste, but
rather must be disposed of at a collection point for
recycling electrical and electronic devices. The
materials are recyclable according to their labelling.
You make an important contribution to protecting
our environment by reusing, recycling or utilising
old devices in other ways. Please ask the municipal
administration where the appropriate disposal
facility is located.