Donner DED-100 User manual

INSTRUCTION MANUAL
This product is subject to change without prior notice
Deutsch ENGLISH
DED-100

REMARK！
● This product is an electro-acoustic instrument product. It is normal that there is a little current
sound in the speaker or earphone after power-on.
Keep away from "radio, TV, antenna receiver, router, refrigerator, TV, motor and other RF electrical
interference sources" during use.
SAMPLING SOURCES USING DREAM
Its core uses the French DREAM brand-new sound source technology, digital sampling, to
bring you a lifelike auditory experience for your performance.
Thank you for choosing our electronic drum. Elegant and delicate electronic drum is the perfect
combination of modern new electronic technology.
◆Before using this product, you must read the instructions in detail.
● Six layers of force are adopted to make it closer to the original drum playing.
● Supports double triggers with edge-hit response.
● Fifteen sets of drum group and one sets of custom drum group.
● Number of timbres 195 and GM standard timbre library. (song use)
● Thirty songs, adjustable GM volume and drum volume .(for learning)
● Effect: reverberation type 0-5, two-band EQ equalization.
● Supporting adjustment of sensitivity parameters of drum discs.
● Speed control: 30-250 beats/minute.
● Metronome: 9 kinds.
● Other functions: customize settings, store and restore factory settings.
● Interpoles: USB MIDI, headphones, audio input, audio output.
FUNCTION INTRODUCTION
1www.donnerdeal.com

FUNCTION INTRODUCTION ---------------------------------------------------------
CATALOG ------------------------------------------------------------------------------
INSTALLATION GUIDE ---------------------------------------------------------------
Check the attached items ----------------------------------------------------------------------
Pipe fitting --------------------------------------------------------------------------------------
Drum cannula ----------------------------------------------------------------------------------
Mounting bracket and drum plate ------------------------------------------------------------
Install the cymbal, control box and place the pedal ------------------------------------------
Insert the connecting wire of drum and cymbal ----------------------------------------------
DIAGRAM OF MODULE BOX SOCKET -----------------------------------------------
POWER TERMINAL CONNECTION -------------------------------------------------------------
USB MIDI PORT ---------------------------------------------------------------------------------
AUDIO OUTPUT PORT -------------------------------------------------------------------------
AUDIO INPUT PORT ----------------------------------------------------------------------------
EARPHONE PORT ------------------------------------------------------------------------------
OPERATION GUIDE -------------------------------------------------------------------
POWER ON -------------------------------------------------------------------------------------
MASTER VOLUME ------------------------------------------------------------------------------
PLAY THE DRUM -------------------------------------------------------------------------------
TIMBRE SELECTION OF DRUM GROUP ------------------------------------------------------
METRONOME ---------------------------------------------------------------------------------
DEMONSTRATION MUSIC PLAYING ---------------------------------------------------------
PLAY SPEED -----------------------------------------------------------------------------------
DRUM DISC SENSITIVITY ADJUSTMENT -----------------------------------------------------
REVERBERATION/EQUILIBRIUM OPTIMIZATION --------------------------------------------
PERCUSSION RECORDING -------------------------------------------------------------------
FACTORY RESET -------------------------------------------------------------------------------
APPENDIX ---------------------------------------------------------------------------
Timbre -----------------------------------------------------------------------------------------
Drum combination timbre --------------------------------------------------------------------
User drum group -----------------------------------------------------------------------------
Demonstration music -------------------------------------------------------------------------
PRODUCT MAINTENANCE ---------------------------------------------------------
SAFETY PRECAUTIONS -------------------------------------------------------------
WARRANTY CARD ------------------------------------------------------------------
1
2
3
3
4
4
5
6
7
8
8
8
8
8
8
9
9
9
9
10
10
11
11
12
12
12
12
13
13
13
13
13
14
15
18
CATALOG
2
www.donnerdeal.com
Deutsch ENGLISH

REMARK！
● Please follow the instructions and read the "safety precautions" in the User Manual carefully
before using it.
● This product needs adult to install, do not let the minor install it independently.
INSTALLATION GUIDE
3www.donnerdeal.com
01
Check the attached items
● After opening the package, please check whether it contains all the items immediately.
If there are any omissions, please contact your dealer.
Plastic head screw
（3pcs）
Sound module Module bracket Hi hat Ride
Tom-tom
(3pcs)
Snare Support rod
Snare Cymbal long pole
（2pcs）
Cymbal short pole
Hi hat pedal Kick pedal
Signal Connection Line
drum stick
power adapterAudio input line Drum key
Crash

INSTALLATION GUIDE
4
www.donnerdeal.com
Deutsch ENGLISH
tom1 tom2
tom3
snare
03
Drum cannula
● please operate carefully during installation, and be careful not to pinch your fingers.
02
Pipe fitting
● The pipe fittings are located in an independent
small package in the packing box.
Insert 3 TOMS and 1 snare drum
into the pipe respectively as shown
in the figure, and lock in the plastic
head fastening screw.

INSTALLATION GUIDE
5www.donnerdeal.com
Insert the bracket and drum into corresponding positions,
and then tighten the screws.
Note: tom and snare drum have different functions.
It is necessary to install them correctly with reference to
the accessory identification!
04
Mounting bracket and drum plate
● The bracket should be inserted in place and the screw should be tightened to avoid falling.
tom1 tom2
tom3
snare

INSTALLATION GUIDE
6
www.donnerdeal.com
Deutsch ENGLISH
hi-hat
crash ride
control box
Install the cymbal and control box on the bracket as shown in the figure
Note: each cymbal has different functions. It needs to refer to the
accessory identification for correct installation!
05
Install the cymbal, control box and place the pedal
● Do not tighten the cymbal, leave some space for it to shake up and down.
Kick drum pedalhi-hat pedal

INSTALLATION GUIDE
7www.donnerdeal.com
Insert the parallel port plug into the
main box as shown in the figure,
and then insert it into the hole
position of the corresponding
striking part according to the
English label on the head of the
connecting line.
06
Insert the connecting wire of drum and cymbal
● Please insert the connecting wire in place to avoid poor contact and insert it
correctly as shown in the figure.
hi-hat
crash ride
tom1 tom2
tom3
snare
control box
Kick drum pedalhi-hat pedal

REMARK！
● To prevent damage to the equipment, make sure to turn down the volume and shut down all the
equipment before making any connection.
● All the external equipment are accessories purchased separately, not included.
1. When in use, connect the power terminal according to the diagram, insert the power outlet of the
module box at one end and 100-240V household power outlet at the other end. (Fig. 1)
2.
If you do not use this product for a long time, please pull out the power plug and keep it properly.
1POWER TERMINAL CONNECTION
Connecting headphones monitors the details of percussion and does not disturb others when
playing without connecting speakers. (Fig. 5)
5EARPHONE PORT
Audio output port can be connected with active speaker (special electronic drum speaker) and large
audio equipment. (Fig. 3)
3AUDIO OUTPUT PORT
Audio input port can connect the sound source playback device to the module box for playback
(such as MP3. mobile phone and other audio signal input). (Fig. 4)
4AUDIO INPUT PORT
The use of electronic drum MIDI USB interface can interact with music devices with MIDI.
1. Through the pre-installed Music software on computers and mobile phones, we can learn to play,
compose music, store and other functions. (Fig. 2)
2. When connected to a computer or mobile phone, the audio output of the device needs to be
connected to the audio input socket of the module box in order to synchronize the sound effects
on the device. (Fig. 5)
2USB MIDI PORT
DIAGRAM OF MODULE BOX SOCKET
8
www.donnerdeal.com
Deutsch ENGLISH
2 31 4 5
MANU
MP3
SONG

Turn the "VOLUME" wheel to adjust the total volume, please adjust the volume to the desired
position. (Fig. 2)
2MASTER VOLUME
9www.donnerdeal.com
1. Turn on the "POWER" switch, and you can enter the playing state. (Fig. 1)
2. Please turn off the power when not in use.
● Processor chips of this product are complex, similar to computer systems. Sometimes they can
not respond. Please turn off the power switch and then turn it on to work properly.
1POWER ON
OPERATION GUIDE
This product has double trigger induction, making the hitting sound effect closer to the original
sound drum effect.
1. "Snare drum" can tap drum face and drum edge.
2. "Crash cymbal" and "Ride cymbal" can tap cymbal face and edge, and hold cymbal edge with
finger to stop the sound.
3. Different combinations of "Hi-hat cymbal" and "Hi-hat pedal" will change the timbre.
● Open hi-hat cymbal timbre: Click on the surface of cymbals.
● Close hi-hat cymbal timbre: Step on the pedal and keep it closed while tapping the cymbal
surface.
● Hi-hat pedal timbre: Step on the pedal and don't hit the cymbal surface.
3PLAY THE DRUM
1
2
3
4
4
5
7 8 6