Doogee CS2 User manual

When using the device for the first time, for your
convenience, please read the manual carefully and
follow the steps in the manual.
user's manual

2. Watch charging and activation
1. Product overview
Before using the watch for the first time, it needs to be charged
and activated. Use the equipped magnetic charger to attach to
the metal spot on the surface of the watch, and connect the
other end of the charger to the USB charging head or the
computer USB port.
EN
Quick start guide
Physical
button
Magnetic
charging
contacts
Heart rate
sensor

1. Wear it correctly: Ensure that
the bottom sensor is properly
installed on the skin, and the
wrist strap should be one
finger away from the wrist.
2. Touch operation: CS2 supports full-screen touch
operation. Single click: select; long press: enter or
confirm.
3. Buttons: CS2 has buttons. Short press: Go back or
close the notification.
Basic operations
Scan the QR code or enter the
major application markets to
download and install "Gloryfit"
Equipment requirements: iOS9.0 and
above; Android4.4 and above, support
Bluetooth 4.0.
Install watch app

Open "Gloryfit" mobile client to
set personal information
Switch to "Device" page, click
Binding Device
Click on your device list in the
scanned device
Binding completion
Main function interface
Main interface / dial

On the main interface, long press the touch screen to
enter, swipe left and right to switch, and click to
confirm. Any choice of 6 styles of dial.
Short press the button on the dial page.
Icons include (status, heart rate, exercise, breathing
training, sleep, stopwatch, information, countdown,
remote music, settings, about, download)
menu

Switch to the heart rate test interface to enter the
real-time heart rate monitoring, the measurement
data can be synchronized to the AP in time, and there
is a test report.
Heart rate monitoring
Check the number of steps walked, the distance
walked and the calories burned at any time in a day.
It can be synchronized to AP in time to view exercise
data.
Status
0289 kcal
12.06 km
20215 steps
10:32
200
50
00 06 1812 24
102 000
000
bpmbpm
10:32

Swipe to the right on the main interface to enter the
menu interface and click on the exercise icon to enter
the exercise mode detection.
(Running, walking, cycling, mountaineering, yoga,
skipping rope, tennis, baseball, basketball,
badminton, football, rugby, table tennis)
In the menu interface, click the exercise icon to enter,
slide up and down to switch, the stand-alone
computer starts to calculate, and slide right to exit
the current exercise mode.
movement
Outdoor Running
Walking
Cycling
Alpinism
Yoga
Skipping
Tennis
Baseball
Yoga
Skipping
Tennis
Baseball Table tennis
Skipping
Tennis
Baseball

1. Enter the breathing training function and select the
duration
2. Click start, adjust your breathing according to the
animation instructions, it will help you relax
Breath training
Sleep monitoring
Deep
Light
08Hour02Min
08Hour02Min
08 H
02 M
No sleep record,
please wear a
watch to fall asleep

When you fall asleep, the watch will automatically
determine to enter sleep detection, automatically
detect your deep sleep/light sleep/waking time all
night, and calculate your sleep quality; detailed
sleep data can only be viewed on the APP side for
the time being
Tap the stopwatch icon to enter the stopwatch
function. Swipe right to exit.
Stopwatch
Message interface
00:06:24
10:32
Empty
10:32
10:32
10:32
Let’s play football
together!
Let’s play football
together!

Swipe on the main interface to enter the message
interface, click the message icon to view the
information, turn the page on a stand-alone
machine, and exit after viewing the message or
swipe right to exit.
You can set a timer with a preset time on the watch.
When the timer expires, the timer will remind you;
You can customize the timer time.
Countdown
Remote music
00:03:26
10:32
1
Min Min
Min Min
Min Min
5
30
3
10
60
Bluetooth is
connected
Bluetooth is
not connected

After the watch is connected to the APP, you can
control the phone’s music player "previous, next",
"play, pause" songs
Swipe down on the main interface
to enter the setting function
interface. You can select the
options of "Settings, Do Not
Disturb Mode, Brightness
Adjustment, Find Phone, About,
Keep the Screen On for 2 Minutes",
and click the icon to enter the corresponding setting
function
Status Bar
1. You can switch the dials stored locally on the watch
2. Adjust the brightness of the watch
3. Control the watch to restore factory settings and
shut down (after restoring the factory settings, all
data in the watch will be cleared)
Set up
Click the brightness adjustment icon to freely select
the screen brightness
Dimming

In the connection status bar, click the "find" icon to
enter, the stand-alone phone will vibrate and ring,
and the watch will vibrate twice.
Find mobile interface
Click the about icon to display the device name,
Bluetooth address and version number
Keep the screen on for 2 minutes
Turning on the screen will keep the screen on for 2
minutes, and remain the same as the normal mode
after sleep.
About the interface
Settings-shutdown icon click to confirm, you can shut
down
Shutdown interface
Settings-Restore icon click to confirm, you can restore
the watch, and all data will be restored to the factory.
Restore interface

message notification
Long seat reminder, incoming call
reminder, goal achievement
reminder, alarm clock reminder,
and reminder functions need to
turn on the reminder switch on the
APP side, and keep the phone and
watch Bluetooth in a successful
connection state, and there is a message that vibrates
and lights up the screen to remind you.