Dorel Asia Baby Relax DA6727SGT-BR User manual

Model No:
DA6727SGT-BR (Brown)
DA6727SGT-BG (Beige)
DA6727SGT-GR (Grey)
UPC CODE:
NOTE:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
Lot number:
(TAKEN FROM CARTON)
___________________
DOREL ASIA
0-65857-16687-3 (Brown)
0-65857-16688-0 (Beige)
SWIVEL GLIDER
0-65857-16689-7 (Grey)
Date of purchase:
_______ / _______ / _______
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

*
*
*
*
*
*
Check bolts/screws periodically and tighten them if necessary.
DO NOT use power tools.
CAUTION: Adult assembly required.
Assembly and handling will require two people.
Estimated assembly time: 8 minutes.
LIMITED WARRANTY
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT USE.
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair
or replacement of defective furniture components and no assembly labor is included. This
warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way. Any wearing, tearing or fading
of the fabric is not covered under the warranty. This warranty gives you specific legal rights and
you may also have other rights which vary from State to State.
CARE AND CLEANING
Dust regularly with a soft, dry cloth to prevent soil build up. Wipe away spills immediately to
prevent staining. Use a cloth dampened with water or a professional product to clean the fabric.
Always test an inconspicuous area first. Allow upholstery to dry and brush lightly. Keep away
from heat to avoid glazing, melting or scorching.
MAINTENANCE
Montreal, Quebec
Canada H1G 3L1
E-MAIL: [email protected]
NOTES
Ensure all parts and components are present before beginning assembly.
Assemble on a clean, smooth surface to prevent damage to product finish.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100

HARDWARE LIST
1 2 3
4
PARTS LIST
A B C
D E
1 PC
1 PC
HEX SOCKET HEAD BOLT
7 PCS
1 PC
SEAT BASE
SEAT CUSHION
Ø12.5 X 1.5mm
SWIVEL GLIDER
DA6727SGT-BR / DA6727SGT-BG / DA6727SGT-GR
CHAIR BACK
FLAT WASHER
7 PCS
SPRING WASHER
7 PCS
ALLEN KEY
1 PC
Ø5/16" X 2-3/8"
Ø22 X 1.8mm
M5 X 64mm
LEFT ARM
1 PC
RIGHT ARM
1 PC

STEP 1:
Place all parts on a clean, smooth surface.
Place the left arm (A) onto the seat base (D). Lift the side covers on the seat base (D) to secure the left
arm (A) using flat washers (2), spring washers (3) and hex socket head bolts (1). Use Allen Key (4) to
tighten the bolts.
Repeat this step to assemble the right arm (B) to seat base (D).
SWIVEL GLIDER
DA6727SGT-BR / DA6727SGT-BG / DA6727SGT-GR
①②③
A
D
B
2
4
3
1

STEP 2:
SWIVEL GLIDER
DA6727SGT-BR / DA6727SGT-BG / DA6727SGT-GR
Attach the chair back (C) to the assembled unit by inserting the metal brackets on chair back (C) into
the metal glides on left arm (A) and right arm (B).
Push the chair back (C) with a downward force to secure it into place.
C
D
B
A

STEP 3:
Attach the fabric flap back into place using the Velcro straps.
SWIVEL GLIDER
DA6727SGT-BR / DA6727SGT-BG / DA6727SGT-GR
With the help of another person, gently place the unit on its side and lift the fabric flap underneath seat base (D).
Secure chair back (C) to seat base (D) with flat washers (2), spring washers (3) and hex socket
head bolts (1). Use Allen key (4) to tighten the bolts.
D
C
4
1
3
2
①②③

STEP 4:
Place seat cushion (E) on the glider.
SWIVEL GLIDER
DA6727SGT-BR / DA6727SGT-BG / DA6727SGT-GR
E

Congratulations! You've finished assembling your swivel glider.
SWIVEL GLIDER
DA6727SGT-BR / DA6727SGT-BG / DA6727SGT-GR
CAUTION: This unit is intended for use only with the products
and/or maximum weights indicated. Use with other products and/or
products heavier than the maximum weights indicated may result in
instability or cause possible injury.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
Dust regularly with a soft, dry
cloth to prevent soil build up.
Wipe away spills immediately
to prevent staining. Use a cloth
dampened with water or a
professional product to clean
the fabric. Always test an
inconspicuous area first. Allow
upholstery to dry and brush
lightly. Keep away from heat
to avoid glazing, melting or
scorching.
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

MODEL #: DA6727SGT-BR / DA6727SGT-BG / DA6727SGT-GR
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Customer Service
Customer Service Phone Number 1-800-295-1980
Customer Service Fax Number 514-353-7819
Customer Service Representative Mailing Address:
Email: [e-mail]
C
E
A
B
B
B