Dorel Asia DA1008-7 User manual

DA1008-7 (Mocha)
KEEP FOR FUTURE REFERENCE.
Nightstand
0-65857-17165-5
UPC CODE:
Date of purchase:
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
NOTE:
Lot number:
_______ / _______ / _______
THIS INSTRUCTION BOOKLET
_____________________________________
(TAKEN FROM CARTON)
DOREL ASIA
Model No:
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

*Ensure all parts and components are present before beginning assembly.
*Assemble on a soft, smooth surface to prevent damage to the product finish.
*A Phillips head screw driver is not included.
*
DO NOT use power tools.
*
* Assembly will require two people.
*
Dorel warrants its product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers 1 year from the date of original
purchase. This warranty is valid only upon presentation of proof of purchase. This is
solely limited to the repair or replacement of defective furniture components and no
assembly labor is included. This warranty does not apply to any product which has
been improperly assembled, subjected to misuse or abuse or which has been altered or
repaired in any way. This warranty gives you specific legal rights and you may also have
other rights which vary from State to State.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be
used occasionally to clean surface. Dry immediately. Do not use any abrasives that may
damage finish. Excessive exposure to sunlight and extreme changes in temperature and
moisture can damage wood furniture.
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT USE.
CUSTOMER SERVICE
NOTES:
CARE AND CLEANING
Montreal, Quebec
12345 Albert-Hudon Boulevard, Suite 100
Do not use the unit if it is damaged or broken.
CALL 1-800-295-1980
If you have any questions about this product, contact our customer service
representative first!
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Estimated assembly time: 60 minutes.
MAINTENANCE
E-MAIL: [email protected]
Canada H1G 3L1
You can also order parts by writing to the address listed below. Please include the
product model number, color and a detailed description of the part.
Customer Service Department No. 413

HARDWARE LIST
1 2 3
4 5 6
7 8 9
10
Ø15 * 11 mm
LARGE CAM LOCK
16 PCS
Ø7 * 28 mm
SMALL CAM BOLT
4 PCS
Nightstand
DA1008-7
Ø5/32" * 19mm
BOLT
2 PCS
Ø3 * 15 mm
Ø8 * 30 mm
Ø6 * 20 mm
Ø7 * 36 mm
Ø13 * 10 mm
LARGE CAM BOLT
16 PCS
SMALL WOOD DOWEL
4 PCS
LARGE WOOD DOWEL
12 PCS
FLAT HEAD SCREW
4 PCS
HANDLE
1 PC
SMALL CAM LOCK
4 PCS
Ø4 * 25 mm
ROUND HEAD SCREW
16 PCS

PARTS LIST
A B C D
E F G H
I J K L
M N
LEFT SIDE FRAME
1 PC
FRONT TOP RAIL
1 PC
FRONT BOTTOM RAIL
1 PC
BACK TOP RAIL
1 PC
RIGHT SIDE FRAME
1 PC
TOP PANEL
1 PC
DRAWER BOTTOM
1 PC
RIGHT DRAWER SIDE
1 PC
DRAWER BACK
1 PC
LEFT DRAWER SIDE
1 PC
Nightstand
DA1008-7
SHELF
1 PC
BACK BOTTOM RAIL
1 PC
BACK PANEL
1 PC
DRAWER FRONT
1 PC

STEP 1
Nightstand
DA1008-7
Insert large cam bolts (4) into the left side frame (B) and right side frame (C) as shown.

STEP 2
Nightstand
DA1008-7
Insert large cam locks (3) into the rails (E,F,G and M) and shelf (D).
Insert large wood dowels (1) into the left side frame (B) and right side frame (C).
Secure rails (E,F,G and M) and shelf (D) to the left side frame (B) and right side frame (C)
by rotating the large cam locks (3) 1/2 turn clockwise using a Phillips head screwdriver
(not included).

STEP 3
Nightstand
DA1008-7
Insert large cam bolts (4) into the top panel (A).

STEP 4
Nightstand
DA1008-7
Insert large wood dowels (1) into the left side frame (B) and right side frame (C).
Insert large cam locks (3) into the left side frame (B) and right side frame (C).
Fasten top panel (A) to the assembled unit by rotating large cam locks (3) 1/2-turn
clockwise using a Phillips head screwdriver (not included).

STEP 5
Nightstand
DA1008-7
Attach back panel (N) to the assembled frame with round head screws (10).
Use a Phillips head screwdriver (not included) to tighten the screws.

STEP 6
Nightstand
DA1008-7
Insert small cam bolts (6) and small wood dowels (2) into the front drawer panel (L).
Insert small cam locks (5) into the left drawer side (H) and right drawer side (I).
Attach drawer sides (H & I) to the front drawer panel (L). Secure the drawer sides by
rotating small cam locks (5) 1/2-turn clockwise using a Phillips head screwdriver (not
included).
Slide the drawer bottom (K) into the grooves of drawer sides (H & I) and front drawer panel
(L).

STEP 7
Nightstand
DA1008-7
Attach drawer back (J) to the drawer sides (H & I) with flat head screws (7).
Use a Phillips head screwdriver (not included) to tighten the screws.
Attach handle (8) to the front drawer panels (L) with bolts (9).
Use a Phillips head screwdriver (not included) to tighten the bolts.

STEP 8
Nightstand
DA1008-7
Insert the drawer into the assembled unit.

That's it! You've finished assembling your nightstand.
DA1008-7
Nightstand
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

MODEL #: DA1008-7
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Email: [e-mail]
Customer Service
Customer Service Representative Mailing Address:
Customer Service Phone Number 1-800-295-1980
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1

ESTE MANUEL DE INSTRUCCIONES
CONTIENE INFORMACIÓN DE
SEGURIDAD IMPORTANTE.
POR FAVOR LÉALO Y CONSÉRVELO
PARA REFERENCIA FUTURA.
Numero de lote:
DOREL ASIA
Modelo No:
DA1008-7 (Moca)
MESA DE LUZ
(TOMADO DEL CARTON)
_____________________________________
Fecha de compra:
_______ / _______ / _______
CODIGO UPC:
0-65857-17165-5
NOTA
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
NO DEVUELVA EL PRODUCTO A LA TIENDA.
Si falta una pieza o está dañada, contacte nuestro departamento de
servicio a la clientela. Reemplazaremos la pieza SIN cargo.
Tel #: [phone]
Correo electrónico: [e-mail]
Fax #: [phone]

* El destornillador en cruz no está incluido.
* El armado y la manipulación pueden requerir dos personas.
* El tiempo de armado se estima en 60 minutos.
SERVICIO A LA CLIENTELA
Si faltan piezas o tiene alguna pregunta sobre este producto, ¡primero contacte nuestro representante de
servicio a la clientela!
LLAME AL 1-800-295-1980
También puede pedir piezas escribiendo a la dirección indicada abajo. Por favor incluya el número de
modelo, color y una descripción detallada de la pieza.
Departamento de Servicio a la Clientela No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canadá H1G 3L1
Correo electrónico: [email protected]
AVERTENCIA
* Para evitar que se raye, por favor retire todo el embalaje y ármelo sobre una superficie
limpia y suave.
* Ensamble sobre una superficie suave, lisa para evitar daños en el acabado del producto.
GARANTÍA LIMITADA
Dorel garantiza que este producto está libre de defectos de material y mano de obra y se
compromete a remediar cualquiera de esos defectos. Esta garantía cubre 1 año a partir de la
fecha de compra original. Esta garantía es válida únicamente si se presenta una prueba de
compra. Esto se limita solamente a la reparación o reemplazo de componentes defectuosos de
los muebles y no incluye el trabajo de armado. Esta garantía no se aplica a ningún producto que
haya sido armado de manera inadecuada, sujeto a un mal uso o abuso o que haya sufrido
cualquier tipo de alteración o reparación. Esta garantía le da las derechas legales específicas y
usted puede también tener otras derechas que varíen de estado al estado.
ADVERTENCIA: Si este producto se ha dañado,
y/o sus componentes están rotos o faltan, NO LO USE.
* No use herramientas eléctricas.
* No use la unidad si está dañado o roto.
CUIDADO Y LIMPIEZA
Límpiela regularmente con un paño suave para evitar la acumulación de suciedad.
Ocasionalmente se puede usar un paño húmedo para limpiar la superficie. Séquela
inmediatamente. No utilice productos abrasivos que puedan dañar la terminación. Una
exposición excesiva a la luz del sol y a cambios extremos de temperatura y humedad puede
dañar los muebles de madera.
MANTENIMIENTO
Verifique las arandelas/tornillos periódicamente y ajústelos si es necesario.

LISTA DE ACCESORIOS
1 2 3
4 5 6
7 8 9
10
Mesa de luz
DA1008-7
Ø8 * 30 mm
Ø6 * 20 mm
Ø15 * 11 mm
CLAVIJA DE MADERA
GRANDE
12 PZAS
CLAVIJA DE MADERA
PEQUEÑA
4 PZAS
SEGURO DE LEVA
GRANDE
16 PZAS
Ø7 * 36 mm
Ø13 * 10 mm
Ø7 * 28 mm
PERNO DE LEVA
GRANDE
16 PZAS
SEGURO DE LEVA
PEQUEÑO
4 PZAS
PERNO DE LEVA
PEQUEÑO
4 PZAS
Ø4 * 25 mm
Ø5/32" * 19mm
TORNILLO DE CABEZA
PLANA
4 PZAS
MANIJA
1 PZA
PERNO
2 PZAS
Ø3 * 15 mm
TORNILLO DE CABEZA
REDONDA
16 PZAS

LISTA DE PIEZAS
A B C D
E F G H
I J K L
M N
Mesa de luz
DA1008-7
TAPA DE LA MESA
1 PZA
MARCO LATERAL
IZQUIERDO
1 PZA
MARCO LATERAL
DERECHO
1 PZA
ESTANTE
1 PZA
SOPORTE ANTERIOR
SUPERIOR
1 PZA
SOPORTE ANTERIOR
INFERIOR
1 PZA
SOPORTE
POSTERIOR
SUPERIOR
1 PZA
LADO IZQUIERDO
CAJÓN
1 PZA
LADO DERECHO
CAJÓN
1 PZA
LADO POSTERIOR
CAJÓN
1 PZA
FONDO CAJÓN
1 PZA
FRENTE CAJÓN
1 PZA
SOPORTE
POSTERIOR
INFERIOR
1 PZA
PANEL
POSTERIOR
1 PZA

ETAPA 1
Mesa de luz
DA1008-7
Inserte pernos de leva grandes (4) en el marco lateral izquierdo (B) y el marco lateral
derecho (C) como ilustrado.

ETAPA 2
Mesa de luz
DA1008-7
Inserte seguros de leva grandes (3) en los soportes (E,F,G y M) y en el estante (D).
Inserte clavijas de madera grandes (1) en el marco lateral izquierdo (B) y en el marco lateral derecho
(C).
Una los soportes (E,F,G y M) y el estante (D) con el marco lateral izquierdo (B) y el marco lateral
derecho (C) girando los seguros de leva grandes (3) 1/2 vuelta en sentido horario con un
destornillador Phillips (no incluido).