Dorel Asia Baby Relax DA7750 User manual

ESPRESSO
WHITE
TODDLER BED
0-65857-17411-3
ESPRESSO
0-65857-17601-8
WHITE
FUTURE REFERENCE.
LOT NUMBER:
(TAKEN FROM CARTON)
DO
NOT
RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, Contact our
customer service department. We will
replace the part FREE of charge.
Tel # : [phone]
E-Mail: [email protected]
Fax #: [phone]
NOTE:
______ / ______ / ______
THIS INSTRUCTION BOOKLET
CONTAINS
IMPORTANT
SAFETY
READ AND KEEP FOR
DATE OF PURCHASE:
INFORMATION. PLEASE
DA7750
DOREL ASIA
DA7750W
MODEL NO:
UPC CODE:

*
*
*
*
*
*
*
*
*
DO NOT place items with a string, cord, or ribbon around a child's neck, such as hood strings
or pacifier cords.
E-MAIL: [email protected]
WARNING ENTRAPMENT/
STRANGULATION HAZARD:
Infants have died in toddler beds from entrapment and strangulation.
Failure to follow these warnings and assembly instructions could result in serious injury or
DO NOT suspend strings over a toddler bed for any reason.
Any mattress used must be at least 27-1/4 inches by 51-5/8 inches (69cm by 131cm) with a
minimum thickness of 4 inches (10cm) and not exceeding 6 inches (15cm).
death from entrapment or strangulation.
NEVER use bed with children under 15 months.
The TODDLER BED is not intended for children under 15 months of age or over 50 pounds
(22.7kg).
If guardrails are used as the mattress containment means, guardrail(s) provided must be used to
avoid the formation of a gap between the mattress and the bed that could cause an entrapment.
DO NOT place TODDLER BED near windows where cords from blinds or drapes may
strangle a child.
Montreal, Quebec
Canada, H1G 3L1
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer
service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100

* Ensure all parts and components are present before beginning assembly.
* Phillips head screwdriver is not included.
* Assembly will require 2 people.
* Estimated assembly time: 45 minutes.
* DO NOT use power tools.
*Caution: Adult assembly required.
* DO NOT lift bed from side rails when moving. Raise from headboard and footboard when
moving bed.
Dorel warrants its product to be free from defects in material and workmanship and agrees
to remedy any such defect. This warranty covers 1 year from the date of original purchase.
This warranty is valid only upon presentation of proof of purchase. This is solely limited to
the repair or replacement of defective furniture components and no assembly labor is
included. This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or repaired in any
way. This warranty gives you specific legal rights and you may also have other rights which
vary from State to State.
WARNING: Should this product become
damaged, and/or components are broken or
missing, DO NOT USE.
NOTES
CARE AND CLEANING
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may
damage finish. Excessive exposure to sunlight and extreme changes in temperature and
moisture can damage wood furniture.
MAINTENANCE
Check bolts periodically and tighten if necessary.
LIMITED WARRANTY

1 2
3 4
5 6
TODDLER BED
DA7750/DA7750W
BOLT
2 PCS
BOLT
20 PCS
1/4" x 2-3/4" 1/4" x 1-3/4"
WOOD DOWEL
12 PCS
WOOD DOWEL
20 PCS
HARDWARE LIST
BARREL NUT
10 PCS
ALLEN KEY
1 PC
10mm x 40mm 8mm x 30mm
4MM
1/4" x 1/2"

A B C
D E F
G H I
J K L
TODDLER BED
DA7750/DA7750W
PARTS LIST
HEADBOARD POST
2 PCS
TOP PANEL
1 PC
MIDDLE PANEL
1 PC
BOTTOM PANEL
1 PC
FOOTBOARD PANEL
1 PC
FOOTBOARD POST
2 PCS
CENTER SUPPORT SLAT
1 PC
WIDE SUPPORT SLAT
4 PCS
NARROW SUPPORT SLAT
6 PCS
LEFT SIDE RAIL
1 PC
RIGHT SIDE RAIL
1 PC
GUARDRAIL
2 PCS

TODDLER BED
DA7750/DA7750W
Insert the wood dowel (5) into top panel (B), middle panel (C) and bottom panel (D).
Attach panels (B, C & D) to the headboard posts (A) as shown below using bolt (1)
and Allen key (4).
NOTE: Do not fully tighten the bolts. Leaving the bolts loose will facilitate assembly
in the following steps.
STEP 1
A
1
A
D
C
1
5
5
5
5
5
5
5
5
15

STEP 2
Insert the wood dowels (5) to the footboard panel (F).
Attach footboard panel (F) to the footboard posts (E) using bolt (1) and Allen key (4)
as shown below.
TODDLER BED
DA7750/DA7750W
15
E
5
5
E

TODDLER BED
DA7750/DA7750W
STEP 3
Insert wood dowels (6) into both ends of narrow support slats (L) and wide support slats (K) as
shown.
Insert barrel nut (3) into the hole on center support slat (J). Ensure the barrel nut (3) is flush with
center support slat (J).
Attach the center support slat (J) to the right side rail (H) by inserting bolt (1) through the right side
rail (H) and into the barrel nut (3). Use Allen key (4) to tighten the bolt (1).
Insert the wide and narrow support slats (K & L) into the grooves of the right side rail (H). Ensure
the dowels in the slats go into the holes on the side rail.
NOTE: Barrel nut (3) can be rotated using a screwdriver (not included) to properly align with the
bolt coming through side rail (H).

TODDLER BED
DA7750/DA7750W
STEP 4
Insert barrel nut (3) into the other end of center support slat (J). Ensure the barrel nut (3) is flush
with center support slat (J).
Attach the left side rail (G) to slats (K, L & J). Secure center support slat (J) to left side rail (G) with
bolts (1) and Allen key (4).
NOTE: The barrel nut (3) can be rotated using a screwdriver (not included) to properly align with the
bolt coming through left side rail (G).
Use Allen Key (4) to tighten the bolts (1) installed in Step 3 & 4.
13

TODDLER BED
DA7750/DA7750W
STEP 5
Insert barrel nuts (3) into both ends of the left and right side rail (G & H).
Attach the headboard and footboard to the left and right side rail (G & H) by inserting bolts (1)
through the headboard posts (A) and footboard posts (E ).
Use Allen key (4) to install bolts.
NOTE: Do not fully tighten the bolts. This will facilitate assembly in the following steps.
13