Dorel Asia DA6452R User manual

DOREL ASIA
Date of purchase:
_______ / _______ / _______
0-65857-16596-8
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
Lot number:
_____________________________________
(TAKEN FROM CARTON)
GLIDER ROCKER &
OTTOMAN
Model No:
DA6452R
NOTE:
UPC CODE:
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
DO NOT
RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: da[email protected]
Fax #: [phone]
DA6452R-DC
0-65857-16634-7

DO NOT leave children unattended on or beside the chair.
DO NOT sit on the edge of the seat, armrests or on the backrest as this could make the chair tip over.
* Ensure that all parts and components are located before beginning assembly.
* Assembly may require two people.
* Assemble on a soft surface to prevent damage to the product finish.
* Read all instructions completely before assembly.
* Phillips head screwdriver is not included
* Do not use power tools.
* Cushions must not be machine washed. Dry clean only.
* Estimated assembly time: 20 minutes
E-MAIL: [email protected]
Montreal, Quebec
DO NOT use your chair as a step stool.
Dust regularly with a soft, dry cloth to prevent soil build up. Wipe away spills immediately to prevent staining. Use a
cloth dampened with water or a professional product to clean the fabric. Always test an inconspicuous area first. Allow
upholstery to dry and brush lightly. Keep away from heat to avoid glazing, melting or scorching.
* CAUTION: Adult assembly required.
WARNING: Should this product become
damaged, and/or components are broken or missing,
DO NOT USE.
Check bolts/screws periodically and tighten them if necessary.
MAINTENANCE
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to remedy any such
defect. This warranty covers 1 year from the date of original purchase. This warranty is valid only upon presentation of
proof of purchase. This is solely limited to the repair or replacement of defective furniture components and no assembly
labor is included. This warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way. Any wearing, tearing or fading of the fabric is not
covered under the warranty. This warranty gives you specific legal rights and you may also have other rights which vary
from State to State.
LIMITED WARRANTY
CUSTOMER SERVICE
12345 Albert-Hudon Boulevard, Suite 100
Customer Service Department No. 413
CARE AND CLEANING
CALL 1-800-295-1980
WARNING
Canada H1G 3L1
If you are missing parts or have any questions about this product, contact our customer service representative first!
You can also order parts by writing to the address listed below. Please include the product model number, color and a
detailed description of the part.
NOTES

NOTE: Cushions must be dry cleaned only. DO NOT MACHINE WASH.
GLIDER ROCKER & OTTOMAN
1.Useglue(10)wheninsertingwooddowels(5),wipeanyexcessglue.
2.Afterassemblyiscompleted,allow8hoursforgluetodrybeforeusing.
DA6452R / DA6452R-DC

STEP 1
NOTE: Do not fully tighten the bolts. This will make it easier to attach the arms in the following
step.
GLIDER ROCKER & OTTOMAN
Attach back frame (B) to base (A) with hex socket head bolts (2) and spring washers (3).
Use Allen Key (5) to install bolts.
3
31
2
31
1.Useglue(10)wheninsertingwooddowels(5),wipeanyexcessglue.
2.Afterassemblyiscompleted,allow8hoursforgluetodrybeforeusing.
5
3
2
A
B
23
DA6452R / DA6452R-DC

STEP 2
Attach the right arm assembly (FR) to back frame (B) with hex socket head bolt (1), spring washer
(3) and barrel nut (4). Insert the barrel nut (4) into the hole underneath the armrest as per detail A.
Insert the hex socket head bolt (1) with spring washer (3) through the hole in the back frame (B) as
per detail A. Use Allen Key (5) to tighten bolts.
Repeat this to attach left arm assembly (FL).
NOTE : Do not fully tighten the bolts until all bolts have been installed.
GLIDER ROCKER & OTTOMAN
Attach the right arm assembly (FR) to the base (A) with hex socket head bolts (2) and spring washers (3).
Use Allen key (5) to tighten bolts.
4
4
3
31
2
31
1.Useglue(10)wheninsertingwooddowels(5),wipeanyexcessglue.
1
31
DETAIL B
A
DETAIL A
3
2
4
3
1
FL
FR
DA6452R / DA6452R-DC