Dorel Asia WM6394E User manual

TWIN WOODEN DAYBED
DOREL ASIA
MODEL NO:
UPC CODE:
0-65857-16370-4 ESPRESSO
Date of purchase:
_______ / _______ / _______
THIS INSTRUCTION BOOKLET
NOTE:
(TAKEN FROM CARTON)
______________________________
0-65857-16371-1 WHITE
WM6394W WHITE
WM6394E ESPRESSO
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
Lot number:
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT USE.
CARE AND CLEANING
Check bolts/screws periodically and tighten them if necessary.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage
finish. Excessive exposure to sunlight and extreme changes in temperature and moisture can
damage wood furniture.
MAINTENANCE
LIMITED WARRANTY
Dorel Asia warrants its product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers 1 year from the date of original
purchase. This warranty is valid only upon presentation of proof of purchase. This is solely
limited to the repair or replacement of defective furniture components and no assembly labor
is included. This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or repaired in any way.
This warranty gives you specific legal rights and you may also have other rights which vary
from State to State.
Montreal, Quebec
Canada, H1G 3L1
* Read all instructions before use.
* A Phillips Head screw driver is not included.
* Assembly may require two people.
* Estimated assembly time: 30 minutes.
* DO NOT use power tools.
* CAUTION: Adult assembly required.
* Ensure all parts and components are present before beginning assembly.
* Assemble on a soft, smooth surface to prevent damage to the product finish.
E-MAIL: [email protected]
NOTES
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100

HARDWARE LIST
1 2
3 4
5 6
7
Ø1/4" X 80mm
Ø11.8mm X 15mm
Ø6.5mm X 80mm
Ø10mm X 50mm
18 PCS
1 PC
25 PCS
14 PCS
20 PCS
FLAT HEAD SCREW
HEX KEY
Ø4mm X 35mm
STOPPER
JOINT CONNECTOR (4mm HEX HEAD)
TWIN WOODEN DAYBED
WM6394E / WM6394W
8 PCS
BARREL NUT
8 PCS
WOOD JOINT CONNECTOR (4mm HEX HEAD)
WOOD DOWEL

PARTS LIST
A B C
D E F
9 PCS
SPACE BLOCK
2 PCS
2 PCS
TWIN WOODEN DAYBED
WM6394E / WM6394W
1 PC
TOP GUARDRAIL
1 PC
RIGHT BACK POST
1 PC
LEFT BACK POST
FRONT / BACK RAIL
SLAT

PARTS LIST
G H I
J K L
M
2 PCS
1 PC
RIGHT FRONT POST
SIDE FRAME TOP RAIL
TWIN WOODEN DAYBED
WM6394E / WM6394W
2 PCS
SIDE FRAME POST
14 PCS
SIDE FRAME BOTTOM RAIL
BOTTOM GUARDRAIL
1 PC
LEFT FRONT POST
11 PCS
1 PC
GUARDRAIL POST

STEP 1
Attach left back post (A) and left front post (L) to side frame top rail (G) and side frame bottom rail (H) with
wood joint connectors (3) as shown. Use Hex key (6) to tighten wood joint connectors (3).
Repeat the previous step to assemble the other headboard with right back post (B) and right front post (M).
NOTE: Side frame top rail (G) and side frame bottom rail (H) may require that they be pulled closer together or
further apart in order to allow wood dowels (4) to align with holes in posts (A & L) and (B & M).
Insert stoppers (7) and guardrail posts (J) into the bottom guardrail (K) and push down until firmly in place.
Slide the top guardrail (C) onto the guardrail posts (J).
TWIN WOODEN DAYBED
WM6394E / WM6394W
Insert wood dowels (4) into ends of side frame top rail (G) and side frame bottom rail (H). Insert stoppers (7)
and side frame posts (I) into the side frame bottom rail (H) and push down until firmly in place.
Attach the side frame top rail (G) onto the side frame posts (I).

STEP 2
Note: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the following steps.
Insert wood dowels (4) into top/bottom guardrails (C & K) as shown. Attach top/bottom guardrails (C & K) to
the left back post (A) with wood joint connectors (3). Use Hex key (6) to tighten them.
Insert barrel nuts (2) into front/back rails (D). Attach front/back rails (D) to the posts (A) and (L) with joint
connectors (1). Use Hex key (6) to tighten them.
TWIN WOODEN DAYBED
WM6394E / WM6394W

TWIN WOODEN DAYBED
WM6394E / WM6394W
Insert wood dowels (4) into top/bottom guardrails (C & K) as shown. Attach top/bottom guardrails (C & K) to
the right back post (B) with wood joint connectors (3).
Insert barrel nuts (2) into front/back rails (D). Attach front/back rails (D) to the posts (B & M) with joint
connectors (1). Use Hex key (6) to tighten all the bolts previously installed.
STEP 3

STEP 4
Attach slats (E) to front/back rails (D) with flat head screws (5). Use space blocks (F) to space them out
evenly. Tighten all flat head screws (5) with a Phillips head screwdriver (not included).
TWIN WOODEN DAYBED
WM6394E / WM6394W

That's it ! You've finished assembling your Twin Wooden Daybed.
TWIN WOODEN DAYBED
WM6394E / WM6394W
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the aximum weights
indicated may result in instability or cause possible injury.
INTENDED MAXIMUM
WEIGHT IS 225 LBS
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]