Dorel Asia Eddie Bauer Hayworth Crib DA7249 User manual

Model No:
Model No:Model No:
Model No:
UPC CODE:
UPC CODE: UPC CODE:
UPC CODE:
Lot number:
(TAKEN FROM CARTON)
_____________________________________
030 08 2599
_______ / _______ / _______
_______ / _______ / ______________ / _______ / _______
_______ / _______ / _______
030 08 2602
Date of purchase:
DOREL ASIA
DOREL ASIADOREL ASIA
DOREL ASIA
0 65857 16963 8
0 65857 16965 2
DPCI#:
DPCI#:DPCI#:
DPCI#:
Hayworth Crib
Hayworth CribHayworth Crib
Hayworth Crib
DA7249W (White)
DA7249 (Weathered Walnut)
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our
customer service department. We will replace
the part FREE of charge.
Tel #: [phone]
E Mail: [e-mail]
Fax #: [phone]

*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
You can also order parts by writing to the address listed below. Please include the
product model number, color and a detailed description of the part.
Failure to follow these warnings and assembly instructions could result in serious injury or
death.
Read all instructions before assembling crib. KEEP NSTRUCT ONS FOR FUTURE USE.
KEEP NSTRUCT ONS FOR FUTURE USE.KEEP NSTRUCT ONS FOR FUTURE USE.
KEEP NSTRUCT ONS FOR FUTURE USE.
E-MA L: [e-mail]
E-MA L: [e-mail]-MA L: [e-mail]
E-MA L: [e-mail]
Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing
parts or sharp edges before assembly and frequently during use. Securely tighten loose bolts
and other fasteners. DO NOT use crib if any parts are missing, damaged or broken. Contact a
customer service representative at 1-800-295-1980 for replacement parts and instructional
literature if needed. DO NOT substitute parts.
WARN NG
WARN NG WARN NG
WARN NG
To reduce the risk of S DS, pediatricians recommend healthy infants be placed on their backs to
sleep, unless otherwise advised by your physician.
DO NOT
DO NOTDO NOT
DO NOT place crib near window where cords from blinds or drapes may strangle a child.
CUSTOMER SERV CE
CUSTOMER SERV CECUSTOMER SERV CE
CUSTOMER SERV CE
CALL 1-800-295-1980
CALL 1-800-295-1980 CALL 1-800-295-1980
CALL 1-800-295-1980
Customer Service Department No. 413
Customer Service Department No. 413Customer Service Department No. 413
Customer Service Department No. 413
f you are missing parts or have any questions about this product, contact our customer
service representative first!
12345 Albert-Hudon Boulevard, Suite 100
12345 Albert-Hudon Boulevard, Suite 10012345 Albert-Hudon Boulevard, Suite 100
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Montreal, QuebecMontreal, Quebec
Montreal, Quebec
Follow warnings on all products in a crib.
Canada, H1G 3L1
Canada, H1G 3L1Canada, H1G 3L1
Canada, H1G 3L1
Strings can cause strangulation! DO NOT
DO NOTDO NOT
DO NOT place crib with a string around a child's neck, such as
hood strings or pacifier cords. DO NOT
DO NOTDO NOT
DO NOT suspend strings over a crib or attach strings to toys.
To help prevent strangulation tighten all fasteners. A child can trap parts of the body or
clothing on loose fasteners.
f refinishing, use a non-toxic finish specified for children's products.
When child is able to pull to standing position, set mattress to lowest position and remove
bumper pads, large toys and other objects that could serve as steps for climbing out.
nfants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional
padding under an infant.
Stop using crib when child begins to climb out or reaches the height of 35 inches (89 cm).
CAUT ON: ENTRAPMENT HAZARD. To avoid dangerous gaps, any mattress used on this bed
shall be a full-size crib mattress at least 51-5/8 inches (1310 mm) in length, 27-1/4 inches (690
mm) in width, and a max thickness of 6 inches (150 mm).
Never use plastic shipping bags or other plastic film as mattress covers because they can
cause suffocation.
Replace teething rail if damaged or loose (if teething rail is provided for this model).
CAUT ON: ANY MATTRESS USED N TH S CR B MUST BE AT LEAST 27-1/4 NCHES BY 51-
CAUT ON: ANY MATTRESS USED N TH S CR B MUST BE AT LEAST 27-1/4 NCHES BY 51-CAUT ON: ANY MATTRESS USED N TH S CR B MUST BE AT LEAST 27-1/4 NCHES BY 51-
CAUT ON: ANY MATTRESS USED N TH S CR B MUST BE AT LEAST 27-1/4 NCHES BY 51-
5/8 NCHES (69CM BY 131CM) W TH A TH CKNESS NOT EXCEED NG 6 NCHES (15CM).
5/8 NCHES (69CM BY 131CM) W TH A TH CKNESS NOT EXCEED NG 6 NCHES (15CM).5/8 NCHES (69CM BY 131CM) W TH A TH CKNESS NOT EXCEED NG 6 NCHES (15CM).
5/8 NCHES (69CM BY 131CM) W TH A TH CKNESS NOT EXCEED NG 6 NCHES (15CM).
nfants can suffocate in gaps between crib sides and a mattress that is too small.
The TODDLER BED
TODDLER BEDTODDLER BED
TODDLER BED or DAY BED
DAY BEDDAY BED
DAY BED is not intended for children under 15 months of age or over 50
pounds (22.7kgs).
f guardrails are used as the mattress containment means, guardrail(s) provided must be used
to avoid the formation of a gap between the mattress and the bed that could cause an
entrapment (when product is used as a TODDLER BED
TODDLER BEDTODDLER BED
TODDLER BED or DAY BED
DAY BEDDAY BED
DAY BED).

*
*
*
*
*
*
*
DO NOT
DO NOTDO NOT
DO NOT use power tools.
CAUT ONS: Adult assembly required.
Assembly will require two people.
Phillips head screwdriver is not included.
Assemble on a soft, smooth surface to prevent damage to product finish.
NOTES
NOTESNOTES
NOTES
WARN NG: Should this product become
WARN NG: Should this product become WARN NG: Should this product become
WARN NG: Should this product become
damaged, and/or components are broken or
damaged, and/or components are broken ordamaged, and/or components are broken or
damaged, and/or components are broken or
missing, DO NOT USE.
missing, DO NOT USE.missing, DO NOT USE.
missing, DO NOT USE.
Estimated assembly time: 30 minutes.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be
used occasionally to clean surface. Dry immediately. Do not use any abrasives that may
damage finish. Excessive exposure to sunlight and extreme changes in temperature and
moisture can damage wood furniture.
CARE AND CLEAN NG
CARE AND CLEAN NGCARE AND CLEAN NG
CARE AND CLEAN NG
MA NTENANCE
MA NTENANCEMA NTENANCE
MA NTENANCE
Check bolts/screws periodically and tighten them if necessary.
DOREL AS A warrants its product to be free from defects in material and workmanship
and agrees to remedy any such defect. This warranty covers 1 year from the date of
original purchase. This warranty is valid only upon presentation of proof of purchase.
This is solely limited to the repair or replacement of defective furniture components and
no assembly labor is included. This warranty does not apply to any product which has
been improperly assembled, subjected to misuse or abuse or which has been altered or
repaired in any way. This warranty gives you specific legal rights and you may also have
other rights which vary from State to State.
L M TED WARRANTY
L M TED WARRANTYL M TED WARRANTY
L M TED WARRANTY
Ensure all parts and components are present before beginning assembly.

1 2
3 4
5 6
7
16 PCS 1 PC
18 PCS
Hayworth Crib
Hayworth CribHayworth Crib
Hayworth Crib
DA7249 / DA7249W
DA7249 / DA7249WDA7249 / DA7249W
DA7249 / DA7249W
HARDWARE L ST
HARDWARE L STHARDWARE L ST
HARDWARE L ST
WOOD DOWEL
20 PCS
6 PCS 16 PCS
Ø6mm x 10mm x 1.2mm 4mm
SPR NG WASHER
Ø8mm x 13mm x 1.5mm
SPR NG WASHER ALLEN KEY
Ø10mm x 50mm Ø1/4" x 3-1/8"
Ø1/4" x 1-3/4" Ø1/4" x 1/2"
BOLT MATTRESS SUPPORT BOLT
BOLT
12 PCS

A
B
C
D
E
F
G
H
J
1 PC
FRONT RA L
1 PC 1 PC
LEFT FRONT POST R GHT FRONT POST
1 PC
R GHT S DE PANEL MATTRESS SUPPORT
1 PC
FRONT PANEL
BACK PANEL
1 PC
PARTS L ST
PARTS L STPARTS L ST
PARTS L ST
LEFT BACK POST
1 PC
R GHT BACK POST
1 PC
Hayworth Crib
Hayworth CribHayworth Crib
Hayworth Crib
DA7249 / DA7249W
DA7249 / DA7249WDA7249 / DA7249W
DA7249 / DA7249W
LEFT S DE PANEL
1 PC
1 PC

Hayworth Crib
Hayworth CribHayworth Crib
Hayworth Crib
DA7249 / DA7249W
DA7249 / DA7249WDA7249 / DA7249W
DA7249 / DA7249W
STEP 1:
STEP 1:STEP 1:
STEP 1:
nsert the wood dowels (1) into the back panel (C).
Attach the left and right back posts (A & B) to the back panel (C) with bolts (2) and
spring washers (7) as shown. Use Allen key (6) to tighten the bolts.

nsert the wood dowels (1) into the left and right side panels (F & G).
Attach the left and right front posts (D & E) to the side panels (F & G) with bolts (3)
and spring washers (7) as shown. Use Allen key (6) to tighten the bolts.
Hayworth Crib
Hayworth CribHayworth Crib
Hayworth Crib
DA7249 / DA7249W
DA7249 / DA7249WDA7249 / DA7249W
DA7249 / DA7249W
STEP 2:
STEP 2:STEP 2:
STEP 2:
6
F
G
D

Hayworth Crib
Hayworth CribHayworth Crib
Hayworth Crib
DA7249 / DA7249W
DA7249 / DA7249WDA7249 / DA7249W
DA7249 / DA7249W
STEP 3:
STEP 3:STEP 3:
STEP 3:
nsert wood dowels (1) into the left side panel (F).
Attach the left side panel (F) to the back panel (C) with bolts (2) and spring washers
(7) as shown. Use Allen key (6) to tighten the bolts.
Repeat this step to attach the right side panel (G) to back panel (C) as shown.
C
G

Attach the mattress support (H) to the left and right side panels (F & G) with mattress
support bolts (4) and spring washers (5). Use Allen key (6) to tighten the bolts.
Hayworth Crib
Hayworth CribHayworth Crib
Hayworth Crib
DA7249 / DA7249W
DA7249 / DA7249WDA7249 / DA7249W
DA7249 / DA7249W
STEP 4:
STEP 4:STEP 4:
STEP 4:
NCORRECT
NCORRECTNCORRECT
NCORRECT-
--
-
Raised edge
should face
down -this photo
shows mattress
support is
upside down.
NCORRECT
NCORRECTNCORRECT
NCORRECT-
--
-
Tabs on
corners of
mattress
support should
point up.
CORRECT
CORRECTCORRECT
CORRECT
*Tabs to point UP.
*
**
*Flat surface of mattress support to
face up - mattress must sit on flat
surface.
*
**
*“TH S S DE UP” label shows which side
to face upward.
NOTE: The above photos and drawings showing how to properly attach the
mattress support are for reference only. Crib styles and colors will vary.
E
H

Hayworth Crib
Hayworth CribHayworth Crib
Hayworth Crib
DA7249 / DA7249W
DA7249 / DA7249WDA7249 / DA7249W
DA7249 / DA7249W
STEP 5:
STEP 5:STEP 5:
STEP 5:
nsert wood dowels (1) into the front rail (J).
Attach the front rail (J) to the front panel ( ) with bolts (3) and spring washers (7) as
shown. Use Allen key (6) to tighten the bolts.
NOTE: The curved edge of front rail (J) must face towards the ground.
NOTE: The curved edge of front rail (J) must face towards the ground.NOTE: The curved edge of front rail (J) must face towards the ground.
NOTE: The curved edge of front rail (J) must face towards the ground.
J

Hayworth Crib
Hayworth CribHayworth Crib
Hayworth Crib
DA7249 / DA7249W
DA7249 / DA7249WDA7249 / DA7249W
DA7249 / DA7249W
Attach the assembled front panel (done in step 5) to left and right front posts (D &
E) with wood dowels (1), bolts (2) and spring washers (7) as shown. Use Allen key
(6) to tighten the bolts.
STEP 6:
STEP 6:STEP 6:
STEP 6:
NOTE: When the child is able to stand on his/her own, place the mattress support
NOTE: When the child is able to stand on his/her own, place the mattress supportNOTE: When the child is able to stand on his/her own, place the mattress support
NOTE: When the child is able to stand on his/her own, place the mattress support
at its lowest position.
at its lowest position.at its lowest position.
at its lowest position.
F
G

* The day bed is not intended for children under 15 months of age or over 50 pounds (22.7 kgs).
* Any mattress used in this crib must be at least 27-1/4 inches by 51-5/8 inches (69cm by
131cm) with a thickness not exceeding 6 inches (15cm).
DAY BED ASSEMBLY NSTRUCT ON: START NG FROM CR B
DAY BED ASSEMBLY NSTRUCT ON: START NG FROM CR BDAY BED ASSEMBLY NSTRUCT ON: START NG FROM CR B
DAY BED ASSEMBLY NSTRUCT ON: START NG FROM CR B
Hayworth Crib
Hayworth CribHayworth Crib
Hayworth Crib
DA7249 / DA7249W
DA7249 / DA7249WDA7249 / DA7249W
DA7249 / DA7249W
WARN NGS:
WARN NGS: WARN NGS:
WARN NGS:
DAY BED ASSEMBLY NSTRUCT ON
DAY BED ASSEMBLY NSTRUCT ONDAY BED ASSEMBLY NSTRUCT ON
DAY BED ASSEMBLY NSTRUCT ON
DAY BED ASSEMBLY NSTRUCT ON: START NG FROM SCRATCH
DAY BED ASSEMBLY NSTRUCT ON: START NG FROM SCRATCHDAY BED ASSEMBLY NSTRUCT ON: START NG FROM SCRATCH
DAY BED ASSEMBLY NSTRUCT ON: START NG FROM SCRATCH
STEP 1:
STEP 1: STEP 1:
STEP 1: Follow steps 1 to 3 of the crib assembly instruction.
STEP 2:
STEP 2: STEP 2:
STEP 2: Follow steps 3 and 4 for the day bed assembly instruction located above (starting
from crib).
STEP 1:
STEP 1: STEP 1:
STEP 1: Detach the assembled front panel ( ) from the side posts (D & E) with Allen key (6).
STEP 4:
STEP 4: STEP 4:
STEP 4: Attach the front rail (J) (the curved edge should face up) to the side front posts (D & E)
with bolts (2), wood dowels (1), spring washers (7) and Allen key (6).
STEP 3:
STEP 3: STEP 3:
STEP 3: Move the mattress support (H) to the lowest position by unscrewing bolts (4)
with Allen key (6).
STEP 2:
STEP 2: STEP 2:
STEP 2: Detach the front rail (J) from front panel ( ) with Allen key (6).
* the curved
edge should
face up

Hayworth Crib
Hayworth CribHayworth Crib
Hayworth Crib
DA7249 / DA7249W
DA7249 / DA7249WDA7249 / DA7249W
DA7249 / DA7249W
FULL S ZE BED ASSEMBLY NSTRUCT ON
FULL S ZE BED ASSEMBLY NSTRUCT ONFULL S ZE BED ASSEMBLY NSTRUCT ON
FULL S ZE BED ASSEMBLY NSTRUCT ON
(HEADBOARD ONLY)
(HEADBOARD ONLY)(HEADBOARD ONLY)
(HEADBOARD ONLY)
MPORTANT:
MPORTANT: MPORTANT:
MPORTANT: Store unused parts of "crib", "day bed" or "full size bed" for future use.
ALWAYS STORE THE ASSEMBLY NSTRUCT ONS N THE POUCH ATTACHED TO THE
MATTRESS SUPPORT (H).
FULL S ZE CONVERS ON RA LS AND LEGS ARE NOT NCLUDED. D AGRAMS ARE
FULL S ZE CONVERS ON RA LS AND LEGS ARE NOT NCLUDED. D AGRAMS ARE FULL S ZE CONVERS ON RA LS AND LEGS ARE NOT NCLUDED. D AGRAMS ARE
FULL S ZE CONVERS ON RA LS AND LEGS ARE NOT NCLUDED. D AGRAMS ARE
FOR REFERENCE ONLY. BED RA LS MAY D FFER FROM LLUSTRAT ON.
FOR REFERENCE ONLY. BED RA LS MAY D FFER FROM LLUSTRAT ON.FOR REFERENCE ONLY. BED RA LS MAY D FFER FROM LLUSTRAT ON.
FOR REFERENCE ONLY. BED RA LS MAY D FFER FROM LLUSTRAT ON.
STEP 1: Attach the full size conversion
rails (not included) to the back panel (C) .
C
C
D AGRAM 1
D AGRAM

FULL S ZE BED ASSEMBLY NSTRUCT ON
FULL S ZE BED ASSEMBLY NSTRUCT ONFULL S ZE BED ASSEMBLY NSTRUCT ON
FULL S ZE BED ASSEMBLY NSTRUCT ON
(HEADBOARD AND FOOTBOARD ONLY)
(HEADBOARD AND FOOTBOARD ONLY)(HEADBOARD AND FOOTBOARD ONLY)
(HEADBOARD AND FOOTBOARD ONLY)
Hayworth Crib
Hayworth CribHayworth Crib
Hayworth Crib
DA7249 / DA7249W
DA7249 / DA7249WDA7249 / DA7249W
DA7249 / DA7249W
C
I
E
D AGRAM 4
MPORTANT:
MPORTANT: MPORTANT:
MPORTANT: Store unused parts of "crib", "day bed" or "full size bed" for future use.
ALWAYS STORE THE ASSEMBLY NSTRUCT ONS N THE POUCH ATTACHED TO THE
MATTRESS SUPPORT (H).
D AGRAM
FULL S ZE CONVERS ON RA LS AND LEGS ARE NOT NCLUDED. D AGRAMS ARE
FULL S ZE CONVERS ON RA LS AND LEGS ARE NOT NCLUDED. D AGRAMS ARE FULL S ZE CONVERS ON RA LS AND LEGS ARE NOT NCLUDED. D AGRAMS ARE
FULL S ZE CONVERS ON RA LS AND LEGS ARE NOT NCLUDED. D AGRAMS ARE
FOR REFERENCE ONLY. BED RA LS MAY D FFER FROM LLUSTRAT ON.
FOR REFERENCE ONLY. BED RA LS MAY D FFER FROM LLUSTRAT ON.FOR REFERENCE ONLY. BED RA LS MAY D FFER FROM LLUSTRAT ON.
FOR REFERENCE ONLY. BED RA LS MAY D FFER FROM LLUSTRAT ON.
STEP 1: Attach the full size conversion
rails (not included) to the back panel (C)
and assembled front panel (D, E, & J).

Hayworth Crib
Hayworth CribHayworth Crib
Hayworth Crib
DA7249 / DA7249W
DA7249 / DA7249WDA7249 / DA7249W
DA7249 / DA7249W
CAUT ON:
CAUT ON:CAUT ON:
CAUT ON: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
That's it ! You've finished assembling your Hayworth Crib.
Dorel Asia is an authorized licensee of Eddie Bauer Licensing Services LLC. Eddie Bauer® and the Eddie
Bauer logos are the registered trademarks of Eddie Bauer Licensing Services LLC.
Stop using crib when child begins
to climb out or reaches the height
of 35.4 in. (90 cm).
ANY MATTRESS USED N TH S
CR B MUST BE AT LEAST 27-1/4
NCHES BY 51-5/8 NCHES (69CM
BY 131CM) W TH A TH CKNESS NOT
EXCEED NG 6 NCHES (15CM).
The DAY BED is not intended for
children under 15 months of age or
over 50 pounds.
DO NOT RETURN PRODUCT TO THE STORE.
f a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
Maximum weight not to exceed 50
pounds when used as a crib.

MODEL #: DA7249 / DA7249W
MODEL #: DA7249 / DA7249WMODEL #: DA7249 / DA7249W
MODEL #: DA7249 / DA7249W
PLEASE DO NOT RETURN TH S PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERV CE REPRESENTAT VES AT THE FOLLOW NG
NUMBERS SHOULD THERE BE ANY M SS NG OR DEFECT VE PART(S).
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Customer Service
Customer ServiceCustomer Service
Customer Service
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Email: [email protected]
Customer Service Phone Number 1-800-295-1980
Customer Service Fax Number 514-353-7819