Dorel Home Products 4489429 User manual

DO NOT RETURN TO THE STORE !
Visit www.dhpfurniture.com/eng/replacement-parts
or call Toll-Free 1-800-267-1739
4489429（Gray Velvet）4071439（Gray linen）
4071039（Black Faux Leather）
B34448942900
Date of Purchase
Upholstered Bed
KT - 2019/12/18
If parts are missing or damaged, we will gladly ship your
replacement parts free of charge.
Lot Number
Thank you for purchasing from DHP!
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
1
© 2014 Dorel Home Products All Rights Reserved
Full Size
Weight Limit:
Bed:450 Lb / 204 Kg
Storage:100 Lb / 45 Kg

Contact Us!
[e-mail]
DHP Consumer Services
12345 Albert Hudon, Suite 100,
Montreal, Quebec, Canada H1G 3L1
Read Before Beginning Assembly
1-800-267-1739
Warranty Information
2
Caution
DHP warrants this product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers one year from the date of
original purchase. This is solely limited to the repair or replacement of defective
parts and assembly labor is not included.
This warranty does not apply to any product which has been improperly assembled,
subjected to misuse or abuse or which has been altered or repaired in any way.
Liability for consequential damages is excluded to the extent exclusion is permitted
by law. This warranty gives you specific legal rights and you may also have other
rights which vary from state to state.
To obtain warranty service, purchaser must present original bill of sale. Components
repaired or replaced are warranted through the remainder of the original warranty
period only. The defective components will be repaired or replaced without charge,
subject to the terms and conditions described above.
Visit www.dhpfurniture.com to view the limited warranty valid in the U.S. and
Canada.
● Call our toll free number if you need assistance.
● Work in a spacious area and near where the unit will be used, preferably on a
carpet, or use a piece of the cardboard packaging to protect your floor and product.
● Recommended # of people needed for assembly: 2 (however it is always better
to have an extra hand). Estimated assembly time is 2.
● Make sure all parts are included. Most parts are labeled or stamped on the raw
edge.
● Read each step carefully. It is very important that each step of the instructions is
performed in the correct order. If these steps are not followed in sequence,
assembly difficulties will occur.
● You can visit our site https://helpcenter.dhpfurniture.com (Scan below
QR-code if you possess a smartphone or tablet) for assembly videos and more!
● This product is designed for home use and not intended for commercial use.
● This product contains small components. Please ensure that they are kept away
from small children.
● Do not use power tools to assemble your furniture. Power tools may strip or
damage the parts.
For help with assembly, identifying parts, product information or to order parts,
please contact us:
9:00 am to 9:00 pm (Eastern Time)
10 am to 6:30 pm (Eastern Time)
11 am to 7 pm (Eastern Time)
Monday to Friday
Saturday
Sunday
SCAN me
& I'll guide you to
DHP Helpcenter!

3
Parts
This item is packed in 2 boxes!
All parts listed on this page are in Box A.
If Box B is missing please contact your Retailer.
Before you throw the package, please use the
Check Box to identify the parts and ensure that
you have all the parts needed for the assembly.
There are inner box(es) that include components
required to complete this assembly.
Replacement Parts, visit
www.dhpfurniture.com/eng/replacement-parts
A
Headboard
X 1
EW
P2
Back Tube
X 1
Front Tube
X 1
Storage Panel
X 2
Wooden Slat
X 24
A
E
F
W
P2
C1
Bed Frame Support Bar
X 2
C1
F

4
Parts
This item is packed in 2 boxes!
All parts listed on this page are in Box B.
If Box A is missing please contact your Retailer.
Replacement Parts, visit
www.dhpfurniture.com/eng/replacement-parts
Before you throw the package, please use the
Check Box to identify the parts and ensure that
you have all the parts needed for the assembly.
There are inner box(es) that include components
required to complete this assembly.
Footboard
X 1
BG
A1
E1
Side Panel
X 1
Side Panel
X 1
Side Rail
X 2 Centre Rail
X 1
Cross Rail
X 1
Bottom Centre Rail
X 1
Support Rail
X 1
Base Support
X 2
Gas Lift
X 2
K
CD
J
M
Support Rail
X 4
Hinge
X 1
Hinge
X 1
Mattress Support
X 2
Leg
X 4
V
Short Support Leg
X 1
L
B
C
D
H
J
KMZ
V
A1
Corner Bracket
X 4
NZ
Y
Double Slat Cap
X 12
Single Slat Cap
X 24
X
Y
E1
X
H
U
G
U
R
L
R
N
I
I

5
Parts
This item is packed in 2 boxes!
All parts listed on this page are in Box B.
If Box A is missing please contact your Retailer.
Replacement Parts, visit
www.dhpfurniture.com/eng/replacement-parts
Before you throw the package, please use the
Check Box to identify the parts and ensure that
you have all the parts needed for the assembly.
There are inner box(es) that include components
required to complete this assembly.
S1
T1
T1
Bracket
X 1 Bracket
X 1
S1

6
Replacement Parts, visit
www.dhpfurniture.com/eng/replacement-parts
Part number
part
Label
4489429
(Gray Velvet)
4071439
(Gray linen)
4071039
(Black Faux Leather)
A T986240 T956590 T956530
A1 T939450 T939450 T939450
B T986250 T956600 T956540
C T986110 T939650 T939330
C1 T939310 T939310 T939310
D T986120 T939660 T939340
E T956550 T956550 T956550
E1 T939460 T939460 T939460
F T939290 T939290 T939290
G T939350 T939350 T939350
H T956560 T956560 T956560
I T956570 T956570 T956570
J T956580 T956580 T956580
K T939400 T939400 T939400
L T939420 T939420 T939420
M T939410 T939410 T939410
N T393110 T393110 T393110
P2 T940050 T940050 T940050
R T939430 T939430 T939430
S1 T940390 T940390 T940390
T1 T940400 T940400 T940400
UT956450 T956450 T956450
Parts
IMPORTANT: Below part numbers list is unique to your product.
Please keep it on hand when calling for replacement parts.
Part number
part
Label
4489429
(Gray Velvet)
4071439
(Gray linen)
4071039
(Black Faux Leather)
V T939440 T939440 T939440
W T939300 T939300 T939300
X T926370 T926370 T926370
Y T926380 T926380 T926380
Z T939490 T939490 T939490

7
Hardware Pack
Hardware Pack #: T4071049-01
Please do not completely tighten all the hardware,
until the entire assembly is complete, unless
otherwise indicated in the step-by-step
instructions.
The screw(s), bolt(s) to be used at each step are
shown in actual size in the lower right corner of
the page.
678
45
3
2
1/4" X 9/16"
X 10 1/4" X 3/4"
X 56
1/4" X1 3/8"
X 7 1/4" X 1 9/16"
X 1
5/16" X 2 9/16"
X 6
8# X 9/16"
X 4
1/4"
X 6 5/16"
X 4
9
1/4"
X 8
10
X1
11
4mm
X 1 5/16" X 1 3/4"
X 4
12
1

8
Step 1
1.1 Screw ❷ onto A and B;
1.2 Attach U to A and B with ❷.
X 12
A
B
2
1.1 1.2
U
Do not completely
tighten the bolts,
leave half of the
thread exposed.
A
BU
U must be oriented
as indicated with the
horizontal surface on top.

9
Step 2
S1
T1
C
D
X 6
Attach S1 to C with ❷;
Attach T1 to D with ❷.
2
T1
D
S1
C

10
Step 3
Before next step, place parts A, B, C and D
as shown in below illustration.
To avoid fraying the fabric during the
assembly, please lay the parts A, B, C
and D on a piece of cardboard.
A
B
C
D
S1
T1