Dorel Home Products C048412 User manual

C048412(Gray Linen)
Date of Purchase
Dining Chair
C.W. - 2021/04/10
Lot Number (TAKEN FROM CARTON)
Thank you for purchasing from DHP!
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
1
© 2021 Dorel Home Products All Rights Reserved
Weight Limit: 250 Lb / 113 Kg
DO NOT RETURN TO THE STORE !
I f parts are missing or damaged, we will gladly ship your
replacement parts free of charge.
Visit www.dhpfurniture.com/eng/replacement-parts
or call Toll-Free 1-800-267-1739
You can also chat with us at www.dhpfurniture.com
B34C04841200-260307-ZQ

2
1-800-267-1739
DHP Consumer Services
12345 Albert Hudon, Suite 100,
Montreal, Quebec H1G 3L1
[e-mail]
is
Limited 1 year Warranty
This warranty does not apply to any product which has been improperly
Visit www.dhpfurniture.com
Contact Us!
Read Before Beginning Assembly
Monday to Friday
Saturday
Sunday
9am to 9pm (Eastern Time)
10 am to 6:30 pm (Eastern Time)
11 am to 7 pm (Eastern Time)
powertools
Chat
with us! www.dhpfurniture.com
This product is packaged in
1 carton
15 mins

3
PARTS
A
C
C
B

4
PART
C048412
T1006240
T1006250
T1006260
(Gray Linen)
S LIST
A
X 2 PCS X 4 PCS
Back Frame Seat Frame Front Leg
X 2 PCS
BC
Each part has a unique part number. Please reference the appropriate part
number when contacting customer service for replacement parts.
Before throwing any packaging, please verify all contents and make sure you
have received all the parts listed above!

Please do not completely tighten all the hardware,
until the entire assembly is complete, unless
otherwise indicated in the step-by-step
instructions.
The screw(s), bolt(s) to be used at each step are
shown in actual size in the lower right corner of the
page.
HARDWARE LIST
Hardware Pack
C048412(Gray Linen)
HP#: TC048412-00
2
3
2
22
42 5
2
1
ALLEN KEY
1 PC
Ø5/16 " x 2 1/4"
10 PCS
BOLT
Ø5/16" x 3 1/2"
8 PCS
BOLT
Ø12.5 X 1.2mm
18 PCS
FLAT WASHER
Ø22 X 1.8mm
18 PCS
FLAT WASHER
5

Place back frame Aon a clean,smooth surface.
Remove the fabric lining underneath seat
frame B.
Attach the seat frame Bto back frame Awith
flat washers ,spring washers and hex
socket head bolts through the center of
the seat frame B.
Use Allen key to tighten the bolts.
NOTE:Do not fully tighten the bolts.
6
23
1
5
23
1
5
23
1
5
X 1X 1
X 1
1
3
2
B
A

7
X 4
4
2
2
3
4
5
X 4X 4
3
2
Secure seat frame Bto back frame Awith
flat washers ,spring washers and
hex socket head bolts .
Use Allen Key to tighten the bolts.
23
5
4
NOTE:Do not fully tighten the bolts.
A
B

8
3
A
B
C
C
5
1
3
2
A
X 4X 4
X 4
1
3
2
Attach front legs Cto seat frame Bwith
flat washers ,spring washers and
hex socket head bolts . Use Allen key
to tighten the bolts.
Tighten all bolts previously installed.
Place the fabric lining back into place.
是
23
1
5

4
Repeat steps 1 ,2 and 3 to assemble the second
chair.
9

9
CAUTION:
•your
•
•
•
Helpful Hints
Weight Limit:
250 113
g your chair !
Keep away from heat to avoid melting, glazing
etc.
•
CAUTION
Keep away from heat to avoid melting,
melting or scorching.