Dorel Living DA1011-7 User manual

Model Number: UPC Code: Color:
DA1011-7 0-65857-17181-5 Walnut
Date of Purchase: _____ / _____ / _____ Lot Number:
(taken from carton)
NIGHTSTAND
Congratulations on your latest furniture purchase! Dorel Living furniture has been developed with
quality, convenience and style in mind. We trust it will provide you with many years of exceptional
comfort and service.
Before beginning assembly, we encourage you to familiarize yourself with your new furniture piece by
taking a few minutes to go through this booklet. It contains important information on our warranty and
care tips to keep your furniture looking as good as new.
Customer satisfaction is important to us at Dorel Asia. Our agents are available Monday to Friday
8am to 5pm (EST) to answer any question you may have. For faster service, always have the model
number ready when calling our toll free number 1-800-295-1980 or emailing us at [email protected] .
For more great furniture ideas, check out our website at www.dorelliving.com
You can also keep up to date on all the latest trends by liking our Facebook page.
DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact
our customer service department. We will replace the part FREE of charge.
NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.

*Ensure all parts and components are present before beginning assembly.
*Assemble on a soft, smooth surface to prevent damage to the product finish.
*A Phillips head screw driver is not included.
*
DO NOT use power tools.
*
* Assembly will require two people.
*
Dorel warrants its product to be free from defects in material and workmanship and
agrees to remedy any such defect. This warranty covers 1 year from the date of original
purchase. This warranty is valid only upon presentation of proof of purchase. This is solely
limited to the repair or replacement of defective furniture components and no assembly
labor is included. This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or repaired in any
way. This warranty gives you specific legal rights and you may also have other rights
which vary from State to State.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be
used occasionally to clean surface. Dry immediately. Do not use any abrasives that may
damage finish. Excessive exposure to sunlight and extreme changes in temperature and
moisture can damage wood furniture.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
CUSTOMER SERVICE
NOTES:
CARE AND CLEANING
Montreal, Quebec
12345 Albert-Hudon Boulevard, Suite 100
Do not use the unit if it is damaged or broken.
CALL 1-800-295-1980
If you have any questions about this product, contact our customer service representative
first!
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Estimated assembly time: 60 minutes.
MAINTENANCE
E-MAIL: [email protected]
Canada H1G 3L1
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
Customer Service Department No. 413

HARDWARE LIST
1 2 3
4 5 6
7 8 9
10 11
NIGHTSTAND
DA1011-7
HANDLE
1 PC
Ø5/32" * 7/8"
Ø13 * 10 mm
SMALL CAM LOCK
8 PCS
Ø4 * 25 mm
SCREW
12 PCS
Ø4 * 30 mm
Ø6 * 25 mm
Ø6 * 37 mm
Ø8 * 32 mm
Ø15 * 12 mm
Ø6 * 36 mm
LARGE CAM LOCK
18 PCS
WOOD DOWEL
18 PCS
LARGE CAM BOLT
18 PCS
SCREW
12 PCS
BOLT
2 PCS
SMALL CAM BOLT
8 PCS
Ø3.5 * 15 mm
SCREW
3 PCS
WOOD DOWEL
12 PCS

PARTS LIST
A B C
D E F
G H I
FRONT RAIL
2 PCS
LEG
4 PCS
DRAWER BOTTOM
2 PCS
BOTTOM PANEL
1 PC
BACK RAIL
2 PCS
BACK PANEL
1 PC
NIGHTSTAND
DA1011-7
TOP PANEL
1 PC
LEFT SIDE FRAME
1 PC
RIGHT SIDE FRAME
1 PC

PARTS LIST
J K L
M N O
P Q R
S
SMALL LEFT DRAWER
SIDE
1 PC
SMALL DRAWER BACK
1 PC
SMALL DRAWER FRONT
1 PC
TOP BACK RAIL
1 PC
DRAWER SUPPORT RAIL
2 PCS
LARGE DRAWER FRONT
1 PC
SMALL RIGHT DRAWER
SIDE
1 PC
NIGHTSTAND
DA1011-7
LARGE RIGHT DRAWER
SIDE
1 PC
LARGE LEFT DRAWER
SIDE
1 PC
LARGE DRAWER BACK
1 PC

STEP 1
NIGHTSTAND
DA1011-7
Insert large cam bolts (1) into the left side frame (B) and right side frame (C) as shown.
Attach legs (H) to the side frames (B & C) by rotating the legs clockwise.

STEP 2
NIGHTSTAND
DA1011-7
Insert large cam locks (4) into the rails (E, S & G).
Insert wood dowels (2) into the left side frame (B) and right side frame (C).
Secure rails (E, S & G) to the left side frame (B) and right side frame (C) by rotating the
large cam locks (4) 1/2 turn clockwise using a Phillips head screwdriver (not included).

STEP 3
NIGHTSTAND
DA1011-7
Insert large cam bolts (1) into the top panel (A) and bottom panel (D).

STEP 4
NIGHTSTAND
DA1011-7
Insert wood dowels (2) and large cam locks (4) into the left side frame (B) and right side
frame (C).
Fasten top panel (A) and bottom panel (D) to the assembled unit by rotating large cam
locks (4) 1/2-turn clockwise using a Phillips head screwdriver (not included).
Secure top panel (A) with screws (10) using a Phillips head screwdriver (not included).

STEP 5
NIGHTSTAND
DA1011-7
Attach back panel (F) to the assembled unit with screws (7).
Use a Phillips head screwdriver (not included) to tighten the screws.