Dorel Living DA7288B User manual

Model Number: UPC Code: Color:
DA7288B 0-65857-17109-9 Bone
DA7288C 0-65857-17112-9 Charcoal
Date of Purchase: _____ / _____ / _____ Lot Number:
(taken from carton)
UPHOLSTERED QUEEN BED
For more great furniture ideas, check out our website at www.dorelliving.com.
You can also keep up to date on all the latest trends by liking our Facebook page.
NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ
AND KEEP FOR FUTURE REFERENCE.
Congratulations on your latest furniture purchase! Dorel Living furniture has been developed
with quality, convenience and style in mind. We trust it will provide you with many years of
exceptional comfort and service.
Before beginning assembly, we encourage you to familiarize yourself with your new furniture
piece by taking a few minutes to go through this booklet. It contains important information on
our warranty and care tips to keep your furniture looking as good as new.
Customer satisfaction is important to us at Dorel Asia. Our agents are available Monday to Friday
8am to 5pm (EST) to answer any question you may have. For faster service, always have the
model number ready when calling our toll free number 1-800-295-1980 or emailing us at
[email protected] .
DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged, contact our customer
service department. We will replace the part FREE of charge.

*
*
*
*
*
*
*
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
Dorel warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or
replacement of defective furniture components and no assembly labor is included. This warranty
does not apply to any product which has been improperly assembled, subjected to misuse or
abuse or which has been altered or repaired in any way. Any wearing, tearing or fading of the
fabric is not covered under the warranty. This warranty gives you specific legal rights and you may
also have other rights which vary from State to State.
A Phillips head screw driver is not included.
Estimated assembly time: 45-60 minutes.
CARE AND CLEANING
Dust regularly with a soft, dry cloth to prevent soil build up. Keep away from heat to avoid
glazing, melting or scorching. Use a professional cleaning service to clean the fabric.
MAINTENANCE
Ensure all parts and components are present before beginning assembly.
Assemble on a clean, smooth surface to prevent damage to product finish.
DO NOT use power tools.
CAUTION: Adult assembly required.
Assembly and handling will require two people.
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
E-MAIL: [email protected]
NOTES
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer
service representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
Customer Service Department No. 413

HARDWARE LIST
1 2 3
4 5 6
7 8 9
10 11 12
13
4 PCS
22 PCS
13 PCS
4 PCS
M4 X 70mm
SCREW
Ø5/16" X 50mm
Ø1/4"
Ø5/16" X 70mm
BOLT
NUT
BOLT
FLAT WASHER
SPRING WASHER
WRENCH
26 PCS
26 PCS
1 PC
67 PCS
1 PC
15 PCS
Ø19 X 1.8mm
Ø12.5 X 1.2mm
Ø16 X 1.2mm
Ø5mm
Ø1/4" X 35mm
FLAT WASHER
ALLEN KEY
BOLT
ALLEN KEY
BOLT
SPRING WASHER
1 PC
35 PCS
50 PCS
UPHOLSTERED QUEEN BED
DA7288B/DA7288C
Ø4mm
Ø1/4" X 20mm
Ø10.5 X 1.2mm
3/16 " X 1-9/16"
SCREW
4 PCS
1

PARTS LIST
A
B1 B2 C
D1 D2 E1 E2
F G H
IJ K L1 L2
M N O P
FOOTBOARD FOOT
TRIANGLE CONNECTOR
PLATE
RECTANGLE CONNECTOR
PLATE
PLASTIC WASHER
2 PCS
2 PCS
2 PCS
2 PCS
1 PC
5 PCS
5 PCS
1 PC
1 PC
1 PC
1 PC
1 PC
RIGHT SIDE SUPPORT RAIL
SLAT
SUPPORT LEG
LEFT
HEADBOARD
FOOT
RIGHT
HEADBOARD
FOOT
1 PC
1 PC
1 PC
1 PC
LEFT SIDE SUPPORT RAIL
LEFT SIDE SUPPORT RAIL
RIGHT SIDE SUPPORT RAIL
1 PC
1 PC
1 PC
1 PC
LEFT SIDEBOARD
LEFT SIDEBOARD
RIGHT SIDEBOARD
RIGHT SIDEBOARD
UPHOLSTERED QUEEN BED
DA7288B/DA7288C
HEADBOARD BODY
LEFT HEADBOARD WING
RIGHT HEADBOARD WING
FOOTBOARD

STEP 1:
UPHOLSTERED QUEEN BED
DA7288B/DA7288C
Place all parts on a clean, smooth surface.
Attach headboard body (A) to headboard wings (B1 and B2) with flat washers (7), spring
washers (8) and bolts (10).
Use Allen Key (5) to tighten the bolts.
(8)
(7)
(10)
B2
B1
8
10
7
5
A

STEP 2:
UPHOLSTERED QUEEN BED
DA7288B/DA7288C
Attach headboard feet(L1 and L2) to the headboard body (A) with flat washers (7),
spring washers (8) and bolts (12). Use Allen Key (5) to tighten the bolts.
Attach feet (L1 and L2) to headboard wings (B1 and B2) with flat washers (4)and
screws(13). Use a screwdriver (not included) to tighten the screws.
(8)
(7)
(12)
B2
B1
8
12
7
5
(13)
13
L1
L2
A
(4)
4
3/16 " X 1-9/16"
SCREW
4 PCS
1

STEP 3:
UPHOLSTERED QUEEN BED
DA7288B/DA7288C
Attach feet (M) and plastic washers (P) to footboard (C).
M
P
C

STEP 4:
UPHOLSTERED QUEEN BED
DA7288B/DA7288C
Place left sideboards (D1 & D2) side by side as shown below on a smooth, flat surface.
Attach triangle connector plate (N) and rectangle connector plate (O) to the left
sideboards (D1 & D2) with bolts (2), spring washers (3)and flat washers (4). Use Allen key
(1) to tighten the bolts.
Repeat this step to assemble the right sideboards (E1 & E2).
O
(2)
(3)
(4)
O
N
N
O
O
E1
E2
D2
D1

STEP 5:
UPHOLSTERED QUEEN BED
DA7288B/DA7288C
Connect left side support rails (F & G) with bolts (2), spring washers(3), flat washers (4)
and nuts (11) using Allen key (1) and wrench (9) as shown below.
Repeat this step to connect the right side support rails (H & I) as shown below.
(2)
(4)
(11)
(3)
H
I
F
G
Note: 2 bolts are
needed to connect left
side rails (F & G)
Note: 1 bolt is needed
to connect right side
rails (H & I)

STEP 6:
UPHOLSTERED QUEEN BED
DA7288B/DA7288C
Attach the left side support rails (F & G) to left sideboards (D1 & D2) with bolts (2), spring
washers(3) and flat washers (4) using Allen Key (1).
Repeat this step to attach the right side support rails (H & I) to the right sideboards (E1 &
E2).
(2)
(4)
(3)

STEP 7:
UPHOLSTERED QUEEN BED
DA7288B/DA7288C
With the help of another person, attach sideboards (D1 & E1) to headboard wings (B1
& B2) with flat washers (7), spring washers (8) and bolts (10) using Allen key (5).
Note: Do not fully tighten the bolts. Leaving them slightly loose will facilitate assembly
in the following steps.
(7)
(8)
(10)
A
B1
B2
D1
D2
7
10
8
5
E2
E1

STEP 8:
UPHOLSTERED QUEEN BED
DA7288B/DA7288C
Attach footboard (C) to sideboards (D2 & E2) with flat washers (7), spring washers (8) and
bolts (10) using Allen key (5).
Note: Do not fully tighten the bolts. Leaving them slightly loose will facilitate assembly in
the following steps.
(7)
(8)
(10)
D1
A
B1
B2
D2
10
8
7
C
5
E1
E2

STEP 9:
UPHOLSTERED QUEEN BED
DA7288B/DA7288C
Attach support legs (K) to the slats (J) with bolts (6), spring washers (3), flat washers (4)
and Allen key (1) to tighten as shown below.
Support legs (K) are equipped with adjustable levelers. Once the bed is in the desired
location, rotate the adjustable levelers clockwise/counterclockwise until the bed rests
evenly on the floor.
(4)
(6)
K
J
6
3
4
(3)
Adjustable
Leveller

STEP 10:
UPHOLSTERED QUEEN BED
DA7288B/DA7288C
Connect slats (J) to the support rails (F, G, H, I) with bolts (6), spring washers (3), flat
washers (4) and nuts (11) as shown below. Use Allen key (1) and wrench (9) to install the
bolts (6) and nuts (11).
Tighten all bolts previously installed in steps 7 and 8.
(4)
(11)
(6)
6
9
4
11
(3)
3
4
1
Note: Make sure the middle
slat is attached to the aligning
holes on the side rails.

UPHOLSTERED QUEEN BED
DA7288B/DA7288C
CAUTION: This unit is intended for use only with the products
and/or maximum weights indicated. Use with other products and/or
products heavier than the maximum weights indicated may result in
instability or cause possible injury.
That's it! You've finished assembling your Bed.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]
Dust regularly with
a soft, dry cloth to
prevent soil build
up. Keep away
from heat to avoid
glazing, melting or
scorching. Use a
professional
cleaning service to
clean the fabric.

MODEL #: DA7288B/DA7288C
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Street & Number:
City & State:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Email: [e-mail]
Customer Service
Customer Service Phone Number 1-800-295-1980
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
C
B
D
E
A
B
B
B
C
B
D
E
A
B
B
B