DORLAND EX PDA500i Specification sheet

DORLAND System Control Technology Co.,Ltd
Industrial Intrinsically safe EX
handheld terminal EX PDA500i
product instruction manual

Contents
Chapter 1 Safety and Maintenance --------------------------------（2）
Chapter 2 Function illustration --------------------------------（2）
Chapter 3 Installation and Charging -------------------------------（6）
3.1 Battery Removal and Installation
3.2 Charge the battery
3.3 Memory card installation and removal
3.4 How to boot and shut down
Chapter 4 Device key functions -------------------------------------（7）
4.1 Key Description
Chapter 5 Optional function guide --------------------------------（8）
5.1 1D barcode
5.2 2D barcode
5.3 HF
5.4 UHF
5.5
5.6
5.7
Fingerprint
ID card
Other customization features
Chapter 6 Use the function table -----------------------------（10）
Chapter 7 Enter text --------------------------------------------（10）
Chapter 8 common problem -----------------------------------------（11）
1

Chapter 1 Safety and Maintenance
Ordinary PDAs cannot be used in hazardous locations that may cause explosions
because they cannot meet the explosion protection requirements in hazardous
locations.Areas that may cause explosion include: fuel areas (such as under the
deck of a ship, fuel or chemical transport and storage facilities), and places where
the air contains chemicals or particles (such as particles, dust, or metal powder),
such as gas stations. Depots, etc. Industrial Intrinsically safe EX handheld terminal
EX PDA500i manufactured by Beijing Dorland,After being certified by the national
explosion-proof certification organization,Meets GB3836.1-2010 《Explosive
environment Part 1：equipment common enquiries》and
GB3836.4-2010《Explosive environment Part 4：Equipment protected by
intrinsically safe "i"》standard requirement.Suitable for use in areas 1 and 2 where
explosion hazards occur.
Basic parameters
Explosion-proof sign：Ex ib IIC T4 Gb
Explosion proof number：CCRI 17.2076
Protection level：IP65
Safe use warning
Only strictly follow the instructions in this section.The industrial Intrinsically safe EX
handheld terminal EX PDA500i is guaranteed.Before use, please be sure to read this
section carefully.If you have questions or do not understand, please consult the
manufacturer immediately.
2

Safe use rules
The safe use of Industrial Intrinsically safe EX handheld terminal EX PDA500i is based
on the user's compliance with the following rules of use.
a) The battery provided by the mobile phone is a battery specially produced by the
manufacturer, and only the original battery meets the intrinsic safety requirements.Any
other non-original battery will cause the explosion-proof performance of the phone to
fail. So be sure to use the original battery. If you need to replace the battery, please
contact Beijing Delan.Battery is Ex Battery 010 6000mAh Explosion-proof polymer
battery.
b) Charging the phone battery must be done in a safe area. And you must use the
original charger. The maximum charging voltage is 4.3V.
c) It is forbidden to replace batteries for mobile phones in explosion hazardous
locations.
d) It is forbidden to be used in zone 0 of dangerous explosion places.
e) It is forbidden to use earphones, data cables and other plug-in devices and Use
flash functionin explosion hazardous locations.
f) It is forbidden to use the mobile phone vibration function in explosion hazardous
locations.
g) Keep away from high temperatures when using the phone.
Failure and damage handling
Any factor causing the phone may lose its intrinsic safety performance,please stop
using it in a dangerous place. It is recommended to send the phone back to the
manufacturer for testing
Conditions that may cause the explosion-proof performance of mobile phones to fail
include the following:
The phone case is damaged;
the explosion-proof mark cannot be identified;
Stored in areas that do not meet storage conditions; damaged in transit;
Other functions fail.
3

Chapter 2 Function illustration
DC port
USB data charging port
Custom function keys
Custom function key
Volume button Power button
Return key
Custom function key F2
Custom function key F1
Menu
HOME key
Up arrow Down arrow
Left arrow Right arrow
4

Card reading area
Camera
Speaker
Lock Lock
Wristband mouth
Scanning head
5

Basic function parameters
2、Color screen：5 inch 720 * 1280 （Gorilla glass screen）
3、Communication： Unicom/CT 4G、3G、2GFree switch
4、The internet：WiFi、Blueteeth
5、Battery：4500mAh
Chapter 3 Installation and Charging
3.1 Battery Removal and Installation
Battery Removal and Installation
Note: Before removing the battery, be sure to turn off the device and
remove the external power supply. Never remove the battery directly when it is
turned on, otherwise the device may be damaged.
3.2 Charge the battery
Plug in the charger and plug the charger's connector into the device's DC
jack.
Note: Be careful not to forcibly pull out the charging connector. This may
damage the device or the charger.
6
Camera
Blueteeth
3G
3G
1、Size：170*85*23mm

Press the key Description
Power button
A short press during the power-on state causes the device
to go to sleep. Long press to bring up the shutdown menu;
Short press no response in the off state, long press start
Menu Can pop up option menu
Chapter 4 Device key functions
4.1 Key Description
The battery that came with your device must be fully charged before
use.
Do not remove the battery while charging
If the battery runs out, the device turns off automatically.
3.3 Memory card installation and removal
Memory card installation
Please follow the steps below to install：
7
Remove battery back cover and battery, insert according to direction
To remove the memory card, remove it according to the following steps:
Remove the battery back cover and battery and pull out the memory card
Note: Please turn off the computer before uninstalling the memory card.
Otherwise, the files transferred to the device may be lost or the device
may be abnormal.
How to boot and shut down
Make sure the battery is installed. Turn on the power, hold down the power
button until the display shows a boot screen
1、
2、

5.3 HF（13.56M）
See the device's built-in demo. If the customer needs secondary development,
contact technical support engineers.
Press the key Description
Home key
The non-standby interface short press to return to the
standby interface, long press will bring up the interface of the
recently run application. In the client application, the Home
key can be used as a function key (scan, card reading, etc.)
Return key Return to the previous level
volume button Adjust the volume
Chapter 5 Optional function guide
5.1 1D barcode
See the device built-in demo, if the customer needs secondary development
please contact technical support engineers.The 1D code can scan all barcodes
in the national standard, but please pay attention to the clarity of the barcode.
Please don't aim the laser at people's eyes and it will damage the eyes.
5.2 2D barcode
See the device's built-in demo. If the customer needs secondary development.
please contact technical support engineers. The QR code can scan all barcodes
in the national standard, but please pay attention to the clarity of the barcode.
8



5.4 UHF（915M）
5.5 Fingerprint recognition
See the device's built-in demo. If the customer needs secondary development,
contact technical support engineers. There are optional fingerprint and biometric
fingerprint modules of the Ministry of Public Security, both of which are capacitive
and inductive.
5.6
5.7
ID identification
Other customization features
Assemble the security encryption module of the Ministry of Public Security's
second generation certificate. If the customer needs secondary development,
contact technical support engineers.
Can be customized ID reading, fingerprint reading, infrared temperature
measurement, 433M short-range wireless communication and other functions.
9
Chapter 6 Use the function table
Menu Description
Email Used to receive and send email
Calculator For scientific calculations
Contacts Find the contact on the device, click the tab icon to switch to the
group, collection interface.
Browser Support browsing webpages and other operations
See the device's built-in demo. If the customer needs secondary development,
contact technical support engineers. UHF read distance is about 3 meters.

10
Menu Description
Sound Recorder Can record music or other sound
Calendar This feature makes it easy for you to check the date
Settings Can set up different functions in the device to achieve
Clock Set alarm
Gallery You can see pictures and videos after entering
File manager Check the contents of the SD card
Downloads Check the current download of the local resources, etc.
Camera After entering can take pictures and video and other operations
Music Play MP3 and other music files
Chapter 7 Enter text
This device has provided you with an input method. You can download other input
methods for installation and use. After the input method is selected, you can click to
switch the input mode according to the icon of the input method interface; input the
number/Chinese/symbol/letter according to your needs. You can also install other
input methods yourself.
Chapter 8 common problem
If any problem occurs during the use of the equipment, please refer to the
following clauses to resolve it. If the problem still exists, please contact the dealer
or the maintenance company immediately.

11
－Can't charge
－Device can not boot
There are three possibilities: 1. The device charger is not working properly; 2.
The ambient temperature is not suitable; 3. The contact is bad.
Please confirm whether the battery has electricity and confirm whether the
battery contacts are in good contact.
－Unable to scan bar code
1 、Scanning head can not shine, hardware damage;
2 、Confirm whether the bar code is a national standard code;
3 、Confirm whether the barcode is damaged;
－HF cannot read and write cards
Please confirm whether the card type is correct, then confirm whether the
card reading position is correct. In addition, please contact technical support to
confirm if the hardware is damaged.
－UHF cannot read and write cards
Please confirm whether the card type is correct, then confirm whether the
card reading position is correct. In addition, please contact technical support to
confirm whether it is a hardware problem.
Beijing Dorland System Control Technology Co., Ltd.
Add：Room1107, Tower B, Tsinghua Tongfang Technology Square,
No.1 Wangzhuang Road, Haidian District, Beijing, P.R.China
Sales Hotline: [phone]
Service Hotline: [phone]
Mobliephone: [phone]
Website: www.dorland-tech.com
E-mail: [email protected]