Dr. Trust ELEGENCE User manual

ELEGENCE
Personal Scale
Thank you for purchasing Dr Trust Elegence Personal Scale. The scale has been
specically designed for home use with an easy to use interface and to ensure
superior accuracy. Read carefully the instructions provided in this manual for
safe and correct use.
Please visit for further information & Updatewww.drtrustusa.com

INTRODUCTION
OPERATION
KEY FEATURES
PRODUCT SPECIFICATION
ERROR CODES
CAUTIONS FOR SAFE USE & CARE
ABOUT US
CUSTOMER SUPPORT
CARE & MAINTENANCE
The Dr Trust Elegence Personal Scale is a perfect health partner for those who
want to achieve weight management goals. It is a high precision strain gauge
sensor technology that allows you to track your weight accurately. Its weighing
capacity is between 5Kg to 180kg. It is auto calibrated and does not require
added efforts to activate the scale. Its glass platform is wide enough to
accommodate large sizes feet comfortably while four anti-skid feet provide
enough hold to the scale to stay on the ground.
2. KEY FEATURES
1. INTRODUCTION
ŸMeasuring units: kg, pound and stone
ŸAuto on with low power & overload indication
ŸAuto power off feature makes it energy efficient
ŸWeight capacity – 5kg to 180kg
ŸLarge LCD and backlight
ŸAnti-skid pads at the bottom offer grip
ŸHigh precision strain gauge sensor step-on technology
ŸAuto-calibration ensures quick and accurate results
3. OPERATION
1. Weighing Machine Operation
Dr Trust Balance Personal Scale operates as a basic body weighing scale and it
does require any special kind of programming.
Step 1. Power Supply
Open the baery cover and install 2x1.5V AAA baery
Step 2. Place the scale on a hard, at surface.
Place it on optimal ooring surfaces include ceramic tiles, concrete or
hardwood. Uneven oors like carpeted may affect the readings.
Step 3. Choose your desired measurement unit
You can choose the measurement units among kilogram and pound by
clicking the unit button of your scale.
Step 4. Initialize the scale.
If you are placing the scale down for the rst time or moving your unit you
must auto-calibrate the scale.
Step 5. Step on
Place both feet on the center of the platform and stand still
Step 6. Get Weight Readings
Your weight will appear on the LCD.
Step 7. Step off Your Scale
It will reset to “0.0” and turn off automatically.
2. Automatic Turn Off
The scale will turn off automatically after 10 seconds of non-use.
Please keep in mind the rst reading may not be accurate so it can be
disregarded.
To ensure maximum accuracy and consistency digital scales generally
should be moved as little as possible.
Note
4. ERROR CODES
1. LO--When the LCD indicate “Lo”, please open the battery cover and replace
batteries with correct polarity and negative.
2. OL--Maximum capacity exceeded. When the scale is overloaded (over
180kg/396lbs) " OL" will appear on the screen.
2
4
6
4
3
3
5
4
2

5. PRODUCT SPECIFICATION
2. Max Capacity: 180kg/396lbs
3. Division: 0.05kg/0.1Ib
1. High precision strain gauge sensor
4. Unit: kg/lb/st:lb
6. Low power & Overload indication
7. Power Supply: Battery:2x1.5V AAA
5. Auto on & Auto off
6. CARE & MAINTINANCE
ŸDo not expose to direct sunlight, extreme hot/cold or humidity.
ŸAlways remove batteries if not in use for three months or longer.
ŸStore and operate the scale in safe and dry location.
ŸAlways clean it with a soft, damp cloth. Avoid abrasive cleaners and never
sink or submerge in water.
7. CAUTIONS FOR SAFE USE & CARE
ØDo not drop or beat the scale, this may damage the sensor and glass.
ØTo ensure the life of the scale, please do not put in a wet or hot
environment.
ØIf the scale does not work, please check the battery and ensure the
battery is with correct polarity.
ØPlease check if the battery needs to be changed when the scale has been
used regularly, replace battery and try to start again.
ØNever use abrasive cleansers or chemical solvents, as they may destroy
ØPlease place the scale on a hard & at surface when in use to ensure the
greatest accuracy and the service life.
ØClean the scale with a wet cloth, but do not allow water to seep into the
unit and body scale.
ØPlease remove the battery from the scale if it has not been used for a
long period.
ØDo not stack anything on the scale during non-use.
ØDo not put the scale on upright position.
Ø the casing of scale.
ØPlease do not open the rear cover if the user is not professional.
ØThis scale is for family use only and should not be used commercially for
any reason at all.
ØTo switch weight unit exchange display between kilograms (kg) and
pounds (lb), please press” Set/ Unit” button located on the bottom of the
scale.
8. CUSTOMER SUPPORT