DRACAST DRBRP5000D User manual

DRBRP5000D
DRBRP5000D
Instruction Manual
DRBRP5000D
1. Please do not expose the device to excess heat or moisture. Store in a cool, dry place.
2. Please do not let the device be exposed to rain or other liquids to avoid permanent damage.
3. Please do not connect the fixture to excess or incorrect voltage.
4. The body will generate heat when operating. Use caution when handling.
5. During transportation and installation, do not hit the fixture against other items or drop the
fixture. This can cause damage to the light.
6. Please do not directly look at the LED light when the fixture is powered on.
7. Please do not place the fixture near any flammable materials or solvents.
8. Please use adry,soft cloth to clean fixture. The fixture may be cleaned with damp cloth only
when the unit is powered off and unplugged. Dry the fixture with a soft cloth before plugging
back in.
9. Keep the fixture out of reach of children.
10. Please do not operate the fixture over-current. Permanent damage can occur.
11. Do not disassemble the fixture or touch the product’s internal parts. This could result in injury
and permanent damage to the fixture. In the event of a malfunction, the fixture should be
repaired by a qualified technician.
12. Unplug the fixture when not in use.
13. Failure to comply with these warning can result in injury and / or cause permanent damage to
the fixture.
Warningsand Notes
Note:The technical date are subject to change without notice.

Dracast Boltray Series is a high-output, compact light fixture that combines accurate color
rendition with portable design. The result is a light fixture that is perfectly suited for photo and
filmmaking applications. The 5000 model is equipped with a 500W LED COB array in single color
5600K
The Dracast Boltray Series is constructed with an aluminum alloy frame, making the fixture both
durable and lightweight. The lamp head is separated from the power and control assembly giving
the lamp head maximum versatility. The fixture can be powered via AC mains power, or via DC
battery power through its onboard v-mount battery plates. The fixture is equipped with
overheating protection as well as onboard fans for prolonged use. Boltray fixtures are equipped
with a built-in 2.4G wireless receiver enabling it to be controlled via remote.
Product Information Boltray Figure and Components
Specifications
DRBRP5000D
DRBRP5000D
Model DRBRP5000D / DRBRP5000B
Output Power
Luminous Flux
LED Quantity
Color Temperature DRBRP5000D 5600K ± 200K
Illuminant
Adjusting Range
Remote Control
Remote Control distance
AC100-240V 50/60Hz丨DC36V
10%-100%
(99channel 2.4G wireless remote control)
≥50M
500W
1 PCS
45000LM
High-Power LED Module
Color rendering index ≥95
Lithium Battery Type Sony type V lock battery x 4 pcs, the output power of single
battery ≥180 Watts
power input
Overheating Protection:
A thermally triggered overheat protection system will automatically shutdown the fixture if internal
temperure exceeds 90°C (194°F). The fixture will emit an audible warning prior to shutdown. Normal
operation may resume upon completed cooldown.
1
2
4
5
3
8
7
6
COB LED
1
Bowens mounting
2
Angle adjusting knob
3
Power socket
4
Yoke
5
Handle
6
7
Angle adjusting knob
8
DMX socket
9
connection line socket
10
AC Power cord socket
12
DC Power cord socket
11
Power switch
13
14
15
16
17
18
19
Silent fan
The fan will be on all the time as the light is on.
Sony type V lock battery
Channel keys
DMX switch
FUNCTION Button – 5 modes switch
F1- Paparazzi F2- Firework F3- Warning
F4 – Thunder F5 – TV
Shortly press the FUN button to enter into F1-F5 modes of special
effect. Switch sequentially from F1 to F5 by pressing the button.
Wheel the dimmer to change the brightness intensity from 10%
to 100%.
Pressing the dimmer then, and wheel to change the special effect
from weak to strong (1 ‒ 10 ).
LED display
Adjustment knob
19
18
17
16
15
9
10
12
11
13
14
DMX512 dimmer YES (RJ45 interface)
: AC : DC