DRAGONN DN-CH-K01B User manual

Black Ergonomic Kneeling Chair
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/collections/chairs/products/dn-ch-k01b
SKU: DN-CH-K01B/G/W
[e-mail] www.idragonn.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
250lbs
(113.40kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
D (x1)
Seat Pad
E(x1)
Knee Pad
A(x1)
Upper Frame
T-A (x2)
Allen Wrench
B (x1)
Lower Frame
C(x1)
Adjustable
Support
F (x2)
Caster
S-F (x1)
Long Sleeve Nut
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
S-D (x1)
Short Sleeve
Nut
S-E (x1)
Medium Sleeve
Nut
S-B (x3)
Medium Screw
with Washer
S-C (x4)
Long Screw
with Washer
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualied technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Use this product on a stable, level surface. Do not use this product for any purpose that
is not explicitly specied in this manual. Do not exceed weight capacity. Do not stand on this product. We cannot be
liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: THIS PRODUCT CAN RESTRICT CIRCULATION TO LEGS WITH PROLONGED USE.
S-A (x6)
Short Screw
with Washer
G (x2)
Locking Caster

3
ASSEMBLY STEPS
STEP 1
Insert Upper Frame (A) into Lower Frame (B) and align front holes to one of three
positions, depending on the user’s height. Assemble frames using the Long Sleeve Nut
(S-F) with Short Screws with Washers (S-A) and tighten using the Allen Wrenches (T-A).
A
B
S-F S-AS-A
T-A
Shorter
Taller
A

STEP 3
Connect Adjustable Support (C) to rear of Lower Frame (B) using Short Sleeve Nut (S-D)
with Short Screws with Washers (S-A) and tighten using the Allen Wrenches (T-A).
STEP 2
Assemble Adjustable Support (C) to rear of Upper Frame (A) using Medium Sleeve Nut (S-E)
with Short Screws with Washers (S-A) and tighten using the Allen Wrenches (T-A).
4
C
A
S-E S-A
S-A
T-A
C
B
S-D
S-A
S-A
T-A
T-A

STEP 4
Assemble Seat Pad (D) to rear of Upper Frame (A) using Medium Screws with Washers
(S-B). Tighten all screws with the Allen Wrench (T-A).
5

STEP 5
Assemble Knee Pad (E) to front of Lower Frame (B) using Long Screws with Washers
(S-C). Tighten all screws with the Allen Wrench (T-A).
STEP 6
Press t Casters (F) and Locking Casters (G) into holes on underside of the frames.
6
G
F

Adjust seat height and angle by turning the knob on the Adjustable Support (C).
STEP 7
7
C

FOR MORE DRAGONN PRODUCTS, CHECK OUT OUR WEBSITE AT: www.idragonn.com
Love your new Dragonn setup and want to share?
Tag us in your photo! @dragonnbrands
[e-mail] www.idragonn.com 309-278-5303
Chat live with an agent!
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
LAST UPDATED: 02/21/2023
REV1