DRAGONN DN-CH-K01W User manual

White Ergonomic Kneeling Chair
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://idragonn.com/products/ergonomic-kneeling-chair-adjust-
able-stool-for-home-and-oice-improve-your-posture-with-an-
angled-seat-thick-comfortable-cushions-white
SKU: DN-CH-K01W
[e-mail] www.idragonn.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ASSEMBLY STEPS
PACKAGE CONTENTS
TOOLS NEEDED
250lbs
(113.40kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
1 (x1)
Seat Pad
2(x1)
Knee Pad
3(x1)
Upper Frame
10 (x1)
Short Sleeve
Nut
11 (x3)
Medium Screw
with Washer
12 (x4)
Long Screw
with Washer
13 (x2)
Allen
Wrench
4(x1)
Lower Frame
5(x1)
Adjustable
Support
6 (x4)
Caster
7(x1)
Long Sleeve
Nut
8 (x6)
Short Screw
9 (x1)
Medium Sleeve
Nut
STEP 1
Insert upper frame (3) into lower frame (4) and align front holes to one of three positions,
depending on the user leg length. Assemble frames using the long sleeve nut (7) with x2
short screws (8) and tighten using the Allen wrenches (13).
WARNING!
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
WARNING: THIS PRODUCT CAN RESTRICT CIRCULATION TO LEGS WITH PROLONGED USE.
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Use this product on a stable, level surface. Do not use this product for any purpose that
is not explicitly specified in this manual. Do not exceed weight capacity. Do not stand on this product. We cannot be
liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.

3
STEP 2
Assemble adjustable support (5) to rear of
upper frame (3) using medium sleeve nut
(9) with x2 short screws (8) and tighten
using the Allen wrenches (13).
STEP 3
Connect adjustable support (5) to rear of
lower frame (4) using short sleeve nut (10)
with x2 short screws (8) and tighten using
the Allen wrenches (13).
STEP 4
Assemble seat pad (1) to rear of upper
frame (3) using medium screws with
washers (11), and knee pad to front of
lower frame (4) using long screws with
washers (12). Tighten all screws with the
Allen wrench (13).
STEP 5
Press fit casters (6) into holes on underside
of the frames.
STEP 6
Adjust seat height and angle by turning the knob
on the adjustable support (5).

FOR MORE DRAGONN PRODUCTS, CHECK OUT OUR WEBSITE AT: www.idragonn.com
Love your new Dragonn setup and want to share?
Tag us in your photo! @dragonnbrands
[e-mail] www.idragonn.com 309-278-5303
Chat live with an agent!
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
LAST UPDATED: 07/16/2020