DRAGONN DN-CH-K04RB User manual

Black Wooden Rocking Kneeling Chair
Instruction Manual
SKU: DN-CH-K04RB
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/collections/chairs/products/dn-ch-k04rb
[e-mail] www.idragonn.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
C (x1)
Front Frame
Support
E (x1)
Seat Pad
F (x1)
Knee Pad
S-C (x6)
M6x80mm
S-B (x6)
Barrel Nut
T-A (x1)
4mm Allen Wrench
B (x1)
Le Leg
A (x1)
Right Leg
D (x1)
Rear Frame
Support
243lbs
(110kg)
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Use this product on a stable, level surface. Do not use this product for any purpose
that is not explicitly specified in this manual. Do not exceed weight capacity. Do not stand on this product. Do not place
fingers under rockers. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
WARNING: THIS PRODUCT CAN RESTRICT CIRCULATION TO LEGS WITH PROLONGED USE.
WARNING!
S-D (x6)
M6x25mm Screw
S-A (x4)
Wood Dowel Pin

3
ASSEMBLY STEPS
STEP 1
Insert Wood Dowel Pins (S-A) into Front Frame Support (C).
S-A
C

STEP 2
Insert Barrel Nut (S-B) into the hole underneath Front Frame Support (C). Mount Front
Frame Support (C) to Let Leg (B) with M6x80mm Screw (S-C), making sure the wider end of
Front Frame Support (C) is facing forward. Tighten M6x80mm Screw (S-C) with 4mm Allen
Wrench (T-A).
4
Wider End
S-B
C
B
S-C
T-A

STEP 3
Mount Rear Frame Support (D) to Le Leg (B) with M6x80mm Screws (S-C) and Barrel
Nuts (S-B), making sure the wider end of Rear Frame Support (D) is facing down. Tighten
M6x80mm Screws (S-C) with 4mm Allen Wrench (T-A).
STEP 4
Attach Right Leg (A) to chair assembly. Insert Barrel Nut (S-B) and M6x80mm Screw (S-C)
into Front Frame Support (C) and Rear Frame Support (D). Tighten all screws with the 4mm
Allen Wrench (T-A).
5
D
B
S-C
S-B
T-A
A
S-B
S-C
S-C
S-B
T-A
C

Mount Seat Pad (E) with the rounded end facing forward to the assembled frame using
M6x25mm Screws (S-D) in one of two mounting positions, depending on user preference.
Note, if you are taller, you will want to choose the set of holes closest to the front of the
chair. Tighten screws with 4mm Allen Wrench (T-A).
STEP 5
STEP 6
Secure Knee Pad (F) using M6x25mm Screws (S-D). Tighten screws with 4mm Allen
Wrench (T-A).
6
E
S-D
T-A
S-D
T-A
F

STEP 7
The chair is now ready for use.
NOTE: The wood fibers may compress over time as the chair is used, causing the screws to
loosen. 4mm Allen Wrench (T-A) should be kept available to periodically
re-tighten the screws.
T-A
7

FOR MORE DRAGONN PRODUCTS, CHECK OUT OUR WEBSITE AT: www.idragonn.com
Love your new Dragonn setup and want to share?
Tag us in your photo! @dragonnbrands
[e-mail] www.idragonn.com 309-278-5303
Chat live with an agent!
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
LAST UPDATED: 01/20/2022
REV1