DRAGONN DN-CH-K02G User manual

Gray Kneeling Chair with Back Support
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/collections/chairs/products/dn-ch-k02b
SKU: DN-CH-K02G
[e-mail] www.idragonn.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
S-D (x6)
M6x12
S-E (x6)
M6x20 Screw
S-F (x4)
M6x40
S-G (x8)
M6x20
TOOLS NEEDED
Phillips
Screwdriver
Drill
S-H (x2)
M6x25
250lbs
(113.40kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Use this product on a stable, level surface. Do not use this product for any purpose that
is not explicitly specified in this manual. Do not exceed weight capacity. Do not stand on this product. We cannot be
liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: THIS PRODUCT CAN RESTRICT CIRCULATION TO LEGS WITH PROLONGED USE.
A(x1)
Upper Frame
B (x1)
Lower Frame
J(x1)
Back Rest
E(x1)
Knee Pad
D (x1)
Seat Pad
S-C (x1)
Short Sleeve
Nut
S-B (x1)
Medium
Sleeve Nut
S-A (x1)
Long Sleeve
Nut
F (x4)
Caster
C (x1)
Adjustable
T-A (x2)
5mm Allen
Wrench
I (x1)
Back Rest Hinge
G (x2)
Grip Handle
H (x1)
Back Rest
Support
T-B (x1)
Wrench

3
ASSEMBLY STEPS
STEP 1
Insert Upper Frame (A) into Lower Frame (B) and align front holes to one of three positions,
depending on the user’s height. Assemble frames using the Long Sleeve Nut (S-A) with
M6x12 Screws (S-D) and tighten using 5mm Allen Wrenches (T-A).
STEP 2
Assemble Adjustable Support (C) to rear of Upper Frame (A) using Medium Sleeve Nut
(S-B) with M6x12 Screws (S-D) and tighten using 5mm Allen Wrenches (T-A).
Shorter
Taller
A
A
B
S-A S-D
T-A
T-A
AS-B S-D
C

4
STEP 3
Connect Adjustable Support (C) to rear of Lower Frame (B) using Short Sleeve Nut (S-C)
with M6x12 Screws (S-D) and tighten using 5mm Allen Wrenches (T-A).
STEP 4
Assemble Seat Pad (D) to rear of Upper Frame (A) using M6x20 Screws (S-E), and Knee Pad
(E) to front of Lower Frame (B) using M6x40 Screws (S-F). Tighten all screws with 5mm
Allen Wrench (T-A).
S-E
D
S-F
E
B
A
T-A
T-A
T-A
S-D
S-C
B

5
STEP 5
Install Casters (F) into holes on underside of the frames using Wrench (T-B).
STEP 6
Assemble Grip Handles (G) to Seat Pad (D) using M6x20 Screws (S-E). Tighten screws with
5mm Allen Wrench (T-A).
D
M
G
F
F
S-E
D
EE
FF
T-A
T-B

6
STEP 8
Secure Back Rest Support (H) with Back Rest Hinge (I) to Back Rest (J) using
M6x25 Screws (S-H). Tighten screws with 5mm Allen Wrench (T-A).
STEP 7
Insert end of Back Rest Support (H) into slots in Back Rest Hinge (I), then place
cover on the hinge.
I
H
S-H
J
I
H
T-A

7
STEP 9
Attach Back Rest assembly to seat pad (D) using M6x20 Screws (S-E). Tighten screws with
5mm Allen wrench (T-A).
STEP 10
Adjust seat height and angle by turning the knob on the Adjustable Support (C).
S-E
C
D

FOR MORE DRAGONN PRODUCTS, CHECK OUT OUR WEBSITE AT: www.idragonn.com
Love your new Dragonn setup and want to share?
Tag us in your photo! @dragonnbrands
[e-mail] www.idragonn.com 309-278-5303
Chat live with an agent!
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
LAST UPDATED:10/27/2021
REV2.1