Drake Muscle Cars JR3B-6510129-AB User manual

JR3B-6510129-AB
2015+ SIDE ROCKER SPLITTERS
Installation Instructions for 2015-20 Ford Mustang
INSTALLATION
1. Suspend the front of the vehicle on jack stands or place the vehicle
on a lift to ensure ample working space.
2. Thoroughly clean the underside of the factory side rocker panels
prior to installing the side splitters.
3. Pry the 8 plastic pins from the factory locations. (gure 1)
4. Removethefactorydeectorfromtherockerpaneltowardstherear
of the car (gure 2)
TOOLS NEEDED FOR INSTALLATION
• T20 Torx Bit
• Plastic Panel Removal Tool
Figure 1
WARNING!
If any part of this installation seems beyond your level of installation experience, please seek the help
ofacertiedprofessional.
Figure 1A
Before installing this Drake Muscle Cars product, please read through
the installation procedure and verify that all parts are present, including
the supplied hardware. If any items are missing, please contact Drake
Muscle Cars at [phone], 8:00 AM to 5:00 PM PST.
KIT INCLUDES
• 2 Side Rocker Splitters
• T20 Head Self-Tapping Screws
Figure 2

JR3B-6510129-AB
2015+ SIDE ROCKER SPLITTERS
Installation Instructions for 2015-20 Ford Mustang
INSTALLATION
5. Align the side splitter with the factory rocker panel using the molded
humps as guides. Press the 8 factory plastic push pins into the holes.
(gure 3)
6. Before installing hardware, peel back an edge of the red backing on
the supplied double-sided tape, making sure to leave enough to pull the
backingo󰀨oncethepartisfullymounted.
7. Install self-tapping Torx screws into smaller holes in the side splitters.
(gure 4)
8. Slowly pull backing from tape horizontally while applying pressure to
side splitter. (gure 5)
Figure 5
Figure 3
Figure 5
WARNING!
If any part of this installation seems beyond your level of installation experience, please seek the help
ofacertiedprofessional.
Drake Muscle Cars
130 Cassia Way, Henderson, NV 89014-6615
Tel: [phone] Fax: [phone]
www.DrakeMuscleCars.com
Figure 4