Draytek VigorSwitch Q2200x User manual

i
VigorSwitch Q2200x
L2+ Managed Switch
Quick Start Guide
Version: 1.0
Firmware Version: V2.7. 1
(For future update, please visit DrayTek web site)
Date: July 6, 2022

iii
Intellectual Property Rights (IPR) Information
Copyrights © All right s reserved. This publicat ion cont ains inf ormat ion t hat is prot ect ed
by copyright . No part may be reproduced, t ransmit t ed, t ranscribed, st ored in
a ret rieval syst em, or t ranslat ed int o any language wit hout writ t en permission
from t he copyright holders.
Trademarks The f ollowing t rademarks are used in t his document :
Microsof t is a regist ered t rademark of Microsoft Corp.
Wi ndows 8, 10 and Explor er ar e t r ademar ks of Microsof t Corp.
Apple and Mac OS are regist ered t rademarks of Apple Inc.
Ot her product s may be t rademarks or regist ered t rademarks of t heir
respect ive manufact urers.
Safety Instructions and Approval
Safety
Instructions
Read t he inst allat ion guide t horoughly bef ore you set up t he swit ch.
The swit ch is a complicat ed elect ronic unit t hat may be repaired only be
aut horized and qualified personnel. Do not t ry t o open or repair t he
swit ch yourself .
Do not place t he swit ch in a damp or humid place, e.g. a bat hroom.
The swit ch should be used in a shelt ered area, wit hin a t emperat ure
range of +5 to +45 Celsius.
Do not expose t he swit ch t o direct sunlight or ot her heat sources. The
housing and elect ronic component s may be damaged by direct sunlight or
heat sources.
Do not deploy t he cable f or LAN connect ion out door t o prevent elect ronic
shock hazards.
Keep t he package out of reach of children.
When you want t o dispose of t he swit ch, please f ollow local regulat ions
on conservat ion of t he environment .
Warranty
We warrant t o t he original end user (purchaser) t hat t he swit ch will be f ree
from any defect s in workmanship or mat erials f or a period of t wo (2) years
f r om t he dat e of purchase f rom t he dealer . Please keep your pur chase recei pt
in a saf e place as it serves as proof of dat e of purchase. During t he warrant y
period, and upon proof of purchase, should t he product have indicat ions of
failure due t o fault y workmanship and/ or mat erials, we will, at our discret ion,
repair or replace t he defect ive product s or component s, wit hout charge f or
eit her part s or labor, t o what ever ext ent we deem necessary t ore-st ore t he
product t o proper operat ing condit ion. Any replacement will consist of a new
or re-manufact ured f unct ionally equivalent product of equal value, and will
be of f ered solely at our discret ion. This warrant y will not appl y if t he product
is modified, misused, t ampered wit h, damaged by an act of God, or subj ect ed
t o abnormal working condit ions. The warrant y does not cover t he bundled or
licensed sof t ware of ot her vendors. Defect s which do not signif icant ly af fect
t he usabilit y of t he product will not be covered by t he warrant y. We reserve
t he right t o revise t he manual and online document at ion and t o make changes
from t ime t o t ime in t he cont ent s hereof wit hout obligat ion t o not if y any
person of such revision or changes.

iv
EU Declaration of Conformity
We DrayTek Corp. , office at No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan , R.O.C., declare under
our sole responsibility that the product
Product name: 16-port 2.5G with 4-port 10G SFP+ up-link Switch
Model number: VigorSwitch Q2200x
Manufacturer: DrayTek Corp.
Address: No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan
is in conformity with the relevant Union harmonisation legislation:
EMC Directive 2014/30/EU , Low Voltage Directive 2014/35/EU and RoHS 2011/65/EU with reference to the following standards
Standard Version / Issue date
EN 55032 2015+AC:2016 class A
EN 61000-3-2 2014 Class A
EN 61000-3-3 2013
EN 55035 2017
EN 62368-1 2014 +A11:2017
EN IEC63000:2018 2018
Hsinchu December 30, 2020 Calvin Ma / President
(place) (date) (Legal Signature)
Declaration of Conformity
We DrayTek Corp. , office at No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan , R.O.C., declare under
our sole responsibility that the product
Product name: 16-port 2.5G with 4-port 10G SFP+ up-link Switch
Model number: VigorSwitch Q2200x
Manufacturer: DrayTek Corp.
Address: No.26, Fushing Rd., Hukou, Hsinchu Industrial Park, Hsinchu 303, Taiwan
Importer: CMS Distribution Ltd: Bohola Road, Kiltimagh, Co Mayo, Ireland
The Electromagnetic Compatibility Regulations 2016 (SI 2016 No.1091), The Electrical Equipment (Safety) Regulations 2016 (SI
2016 No.1101), and The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations
2012 (SI 2012 No. 3032) with reference to the following standards:
Standard Version / Issue date
EN 55032 2015+A1:2016 class A
EN 61000-3-2 2014
EN 61000-3-3 2013+A1:2019
EN 55024 2010+A1:2015
EN 62368-1 2014+A11:2017
EN IEC 63000:2018 2018
Hsinchu December 30, 2020 Calvin Ma / President
(place) (date) (Legal Signature)

vi
Regulatory Information
Federal Communicat ion Commission Int erference St at ement
This equipment has been t est ed and f ound t o comply wit h t he limit s f or a Class A digit al device,
pursuant t o Part 15 of t he FCC Rules. These limit s are designed t o provide reasonable prot ect ion
against harmf ul int erf erence in a resident ial inst allat ion. This equipment generat es, uses and can
radiat e radio frequency energy and, if not inst alled and used in accordance wit h t he inst ruct ions, may
cause harmf ul int erf erence t o radio communicat ions. However, t here is no guarant ee t hat
int erf erence will not occur in a part icular inst allat ion. If t his equipment does cause harmf ul
int erf erence t o radio or t elevision recept ion, which can be det ermined by t urning t he equipment of f
and on, t he user is encouraged t o t ry t o correct t he int erf erence by one of t he f ollowing measures:
Reorient or relocat e t he receiving ant enna.
Increase t he separat ion bet ween t he equipment and receiver.
Connect t he equipment int o an out let on a circuit dif ferent from t hat t o which t he receiver
is connect ed.
Consult t he dealer or an experienced radio/ TV t echnician for help.
This device complies wit h Part 15 of t he FCC Rules. Operat ion is subj ect t o t he f ollowing t wo
condit ions:
(1) This device may not cause harmf ul int erf erence, and
(2) This device may accept any int erf erence received, including int erf erence t hat may cause
undesired operat ion.
Caut ion: Any changes or modificat ions not expressly approved by t he part y responsible f or
compliance could void t he user's aut horit y t o operat e t he equipment .
More updat e, please visit www.drayt ek. com.
USA Local Represent at ive
Company name ABP Int ernat ional Inc.
Address 13988 Diplomat Drive Suit e 180 Dallas TX 75234 , ZIP Code 75234
E-mail rmesser@abpt ech.com
Cont act Person Mr. Robert Messer
Tel. [phone]
Be a Registered Owner
Web regist rat ion is pref erred. You can regist er your Vigor swit ch via
ht t ps: / / myvigor.drayt ek. com.
Firmware & Tools Updates
Due t o t he cont inuous evolut ion of DrayTek t echnology, all swit ches will be regularly upgraded.
Pl ease consult t he DrayTek web sit e f or more inf ormat ion on newest firmware, t ools and
document s. ht t ps: / / www. drayt ek. com

1
P
Pa ac ck ka ag ge e C Co on nt te en nt t
VigorSwitch Q2200x Quick Start Guide
Rack Mount Kit (brackets)
Console Cable
The t ype of t he power cord depends on t he count ry t hat t he swit ch will be
inst alled.
UK-type Power Cord EU-type Power Cord
USA/Taiwan-type Power Cord AU/NZ-type Power Cord
If any of t hese it ems is f ound missing or damaged, please cont act your local
supplier for replacement .

2
P
Pa an ne el l E Ex xp pl la an na at ti io on n
LED Status Explanation
On (Red) An alert for syst em f ailure due t o overheat ing
or wrong volt age.
Monit or
Off The device is in normal condit ion and running
normally.
On (Green)
The swit ch finishes syst em boot ing and t he
syst em is ready.
Blinking
(Green)
The swit ch is powered on and st art s syst em
boot ing.
SYS
Off The power is of f or t he syst em is not ready /
malf unct ioning.
On (Green)
The device is powered on and running
normally.
PWR
Off The device is not ready or is failed.
On (Green) The device is connect ed wit h 2500Mbps.
On
(Amber)
The device is connect ed wit h
10/ 100/ 1000Mbps.
Blinking The syst em is sending or receiving dat a
t hrough t he port .
Port 1 ~ 16
(2.5GbE RJ45)
Off The port is disconnect ed or t he link is f ailed.
On (Green) The device is connect ed wit h 1000Mbps.
On (Blue) The device is connect ed wit h 10Gbps.
Blinking The syst em is sending or receiving dat a
t hrough t he port .
Port 17 ~ 20
(SFP+)
Off The port is disconnect ed or t he link is f ailed.
Interface Description
Port 1 ~ 16 (2. 5GbE RJ45) Used f or Et hernet connect ion
(10/ 100/ 1000/ 2500Mbps).
Port 17 t o 20
(SFP+)
Port 1 t o 16
(2. 5GbE RJ45)

3
Port 17 ~ 20 (SFP+) Port 17 t o Port 20 are used f or fiber
connect ion.
Console Used t o perf orm t elnet command cont rol.
Power inlet f or AC input (100~240V/ AC,
50/ 60Hz).

4
H
Ha ar rd dw wa ar re e I In ns st ta al ll la at ti io on n
This sect ion will guide you t o inst all t he swit ch t hrough hardware connect ion and
conf igure t he swit ch’ s set t ings t hrough web browser.
3
3. .1 1 N Ne et tw wo or rk k C Co on nn ne ec ct ti io on n
Bef ore st art ing t o configure t he device, you have t o connect your devices
correct ly.
A hierarchical net work wit h minimum levels of devices may reduce t he t iming
delay bet ween server and client st at ion. Basically, t his approach will minimize
t he number of devices in any one pat h; will lower t he possibilit y of net work loop,
and will improve net work ef ficiency. If more t han t wo devices are connect ed in
t he same net work, select one device as a Level 1 device and connect all ot her
devices t o it at Level 2. Server/ Host is recommended t o connect t o t he Level 1
device. This is generally if no VLAN or ot her special requirement s are applied.
All device port s are in t he same local area net work.

5
3
3. .2 2 R Ra ac ck k- -M Mo ou un nt te ed d I In ns st ta al ll la at ti io on n
The swit ch can be inst alled easily by using rack mount kit.
1. Fast en t he rack mount kit on bot h sides of t he VigorSwit ch using specif ic
screws.
2. Then, inst all t he VigorSwit ch (wit h rack mount kit ) on t he 19-inch chassis by
using ot her f our screws.

6
S
So of ft tw wa ar re e C Co on nf fi ig gu ur ra at ti io on n
Bef ore using t he swit ch, perf orm t he f ollowing st eps:
1. Set up a physical pat h bet ween t he configured t he swit ch and a PC by a
qualif ied UTP Cat . 5e cable wit h RJ-45 connect or.
If a PC direct ly connect s t o t he swit ch, you have t o set up t he same subnet mask f or
PC and t he swit ch. Def ault values of t he managed swit ch are list ed as f ollows:
IP Address 192. 168. 1. 224
Subnet Mask 255. 255. 255.0
DHCP Client Enabled (On)
Username admin
Password admin

7
2. Af t er conf iguring correct IP address on your PC, open your web browser and
access swit ch's IP address.
The home page of VigorSwit ch will be shown as below:

8
C
Cu us st to om me er r S Se er rv vi ic ce e
If t he swit ch cannot work correct ly aft er t rying many ef fort s, please cont act your
dealer for furt her help right away. For any quest ions, please f eel f ree t o send
e-mail t o support @drayt ek.com.
GPL Notice This DrayTek product uses sof t ware part ially or compl et ely l icensed under
t he t erms of t he GNU GENERAL PUBLIC LICENSE. The aut hor of t he soft ware
does not provide any warrant y. A Limit ed Warrant y is offered on DrayTek
product s. This Limit ed Warrant y does not cover any sof t ware applicat ions or
programs.
To download source codes please visit :
ht t p: / / gplsource.drayt ek.com
GNU GENERAL PUBLIC LICENSE:
ht t ps:/ / gnu. org/ licenses/ gpl-2. 0
Version 2, June 1991
For any quest ion, please f eel f ree t o cont act DrayTek t echnical support at
support @drayt ek.com f or f urt her informat ion.