Draytek P2261 User manual

V
Vi ig go or rS Sw wi it tc ch h P P2 22 26 61 1
P
Po oE E 2 24 4+ +2 2 G Gi ig ga a P Po or rt t
L
L2 2 M Ma an na ag ge ed d S Sw wi it tc ch h
Quick Start Guide
European Community Declarations
Manufacturer: DrayTek Corp.
Address: No. 26, Fu Shing Road, HuKou Township, HsinChu Industrial Park, Hsin-Chu, Taiwan 303
Product: VigorSwitch P2261
DrayTek Corp. declares that VigorSwitch P2261 is in compliance with the following essential requirements and other relevant
provisions of 2004/108/EC.
The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 2004/108/EC by complying with
the requirements set forth in EN55022/Class A and EN55024/Class A.
The product conforms to the requirements of Low Voltage (LVD) Directive 2006/95/EC by complying with the requirements
set forth in EN60950-1.
Federal Communications Commission (FCC) Statement
This equipment has been tested and found to comply with the limits for a class A computing device pursuant to Subpart J of part
15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial
environment.
GPL Notice
This DrayTek product uses software partially or completely licensed under the terms of the GNU GENERAL PUBLIC
LICENSE. The author of the software does not provide any warranty. A Limited Warranty is offered on DrayTek products. This
Limited Warranty does not cover any software applications or programs.
To download source codes please visit:
http://gplsource.draytek.com
GNU GENERAL PUBLIC LICENSE:
https://gnu.org/licenses/gpl-2.0
Version 2, June 1991
For any question, please feel free to contact DrayTek technical support at [e-mail] for further information.
Version: 1.2
Date: March 31, 2016
VoIPon www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]

Package Content
The 24+2 Giga Port L2 Managed Switch is a standard switch that meets all
IEEE 802.3/u/x/z Gigabit, Fast Ethernet specifications. It is a switch with 24
10/100/1000Mbps TP (20-Port for TP; 4-Port for Combo) and 2-Port
Dual-SFP Fiber management Ethernet ports.
The network administrator can logon the switch to monitor, configure and
control each port’s activity. In addition, the switch implements the QoS
(Quality of Service), VLAN, and Trunking. It is suitable for office
application.
VigorSwitch Rack Mount Kit
CD Ethernet Cable
EU-type power cord
Note: If any of these items is found missing or damaged, please contact
your local supplier for replacement.
VoIPon www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]

Descriptions of Panel
LED Explanation
LED Color Explanation
POWER Green Lit when +3.3V power is coming up.
TP Port 1– 24
(RJ45 LEFT)
LINK/ACT Green Lit when connection with remote device is good.
Blinks when any traffic is present.
TP Port 1– 24
(RJ45 RIGHT)
For PoE model Green Lit Green when PoE device is up.
Off when PoE device is down
SFP Port 21-24
LINK/ACT
Green/
Amber
Lit Green when TP connection with remote device is
1000M..
Lit Amber when TP connection with remote device is
100M.
Blinks when any traffic is present.
SFP Port 25-26
LINK/ACT
Green/
Amber
Lit Green when the connection with remote device is
1000M.
Lit Amber when the connection with remote device is
100M.
Blinks when any traffic is present.
Connector Explanation
Interface Description
RESET Used to restart the device to default settings.
CONSOLE Used to perform telnet command control.
LAN P1 – P24 Giga Ethernet Port.
SFP (21 – 26) SFP Fiber Port.
VoIPon www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]


Installing Your Switch
A hierarchical network with minimum levels of switch may reduce the timing
delay between server and client station. Basically, with this approach, it will
minimize the number of switches in any one path; will lower the possibility of
network loop and will improve network efficiency. If more than two switches
are connected in the same network, select one switch as Level 1 switch and
connect all other switches to it at Level 2. Server/Host is recommended to
connect to the Level 1 switch. This is general if no VLAN or other special
requirements are applied.
The connection among IP Phone, Access Point and VigorSwitch
Each port can support 30.8W power; the total power supply can reach to 185W.
For other examples of hardware installation, please refer to User’s Guide for
detailed information.
VoIPon www.voipon.co.uk [email protected] Tel: [phone] Fax: [phone]