DrBrowns Nipple Shield with Sterilizer Case User manual

1
Nipple Shield
with Sterilizer Case

Position the cut out where baby’s nose will be.
With clean hands, hold the nipple shield in
both hands. The shiny side should be facing
your skin and the matte side facing out.
EN
Gently stretch the shield over your
breast, ensuring your nipple fully ts.
If needed, a small amount of nipple cream
may be rst applied to your skin to help with
shield adhesion. Do not apply to your nipple.
Smooth the sides down for full adhesion.
1
BRW003_F1
Size 1 – up to 24 mm • Size 2 – 25 mm and up
Cleaning
Always use nipple shields under the care of a medical professional or lactation consultant. Before the
rst use and after every use wash nipple shields with warm soapy water, rinse clean, sterilize and air dry.
Sterilizer Instructions
Rest the nipple shields on top pf the holders inside the case. Add 5 teaspoons / 1 oz / 25 ml of water to
the bottom reservoir. Close case securely and microwave for 3 minutes using a 700-1000 watt
microwave. Use caution when removing the case from the microwave, it will be hot! Drain water from
the case and open lid to allow nipple shields to dry and cool for at least 5 minutes. Once cool, wipe out
any remaining water drops to ensure that case is dry before closing lid to store.
Instructions for Use