Dream On Me 416 User manual

WARNING:
INSTRUCTION MANUAL
ASTM
EN1273
BABY WALKER
AVOID SERIOUS INJURY OR DEATH BLOCK STAIRS/STEPS SECURELY BEFORE USING WALKER EVEN WHEN USING
PARKING BRAKE.
TO PROLONG THE LIFE OF YOUR NURSERY PRODUCT KEEP IT CLEAN AND DO NOT LEAVE IT IN THE DIRECT SUNLIGHT FOR
EXTENDED PERIODS OF TIME.
REMOVABLE FABRIC COVERS AND PLASTIC PARTS MAY BE CLEANED USING WARM WATER WITH A HOUSEHOLD SOAP OR A
MILD DETERGENT. ALLOW IT TO DRY FULLY, PREFERABLY AWAY FROM DIRECT SUNLIGHT.
CLEAN (FRICTION COMPONENTS) REGULARLY TO MAINTAIN STOPPING PERFORMANCE.
HELPFUL HINTS
IF THE WHEELS SQUEAK - USE A SILICON BASED SPRAY ENSURING IT PENETRATES THE WHEEL AND AXLE ASSEMBLY. DO NOT
DRY CLEAN, OR USE BLEACH.
DO NOT MACHINE WASH, TUMBLE OR SPIN DRY, UNLESS THE CARE LABELLING ON THE PRODUCT PERMITS THESE METHODS.
NON REMOVABLE FABRIC COVERS AND TRIMS MAY BE CLEANED USING A DAMP SPONGE WITH SOAP OR MILD DETERGENT.
ALLOW IT TO DRY COMPLETELY BEFORE FOLDING OR STORING IT AWAY.
IN SOME CLIMATES THE COVERS AND TRIMS MAY BE AFFECTED BY MOULD AND MILDEW. TO HELP PREVENT THIS
OCCURRING, DO NOT FOLD OR STORE THE PRODUCT IF IT IS DAMP OR WET. ALWAYS STORE THE PRODUCT IN A WELL
VENTILATED AREA.
ALWAYS CHECK PARTS REGULARLY FOR TIGHTNESS OF SCREWS, NUTS AND OTHER FASTENERS - TIGHTEN IF REQUIRED. TO
MAINTAIN THE SAFETY OF YOUR NURSERY PRODUCT, SEEK PROMPT REPAIRS FOR BENT, TORN, WORN OR BROKEN PARTS.
WARNING - STAIR HAZARD
PLEASE READ THESE INSTRUCTIONS CAREFULLY
BEFORE USE AND RETAIN THEM
IN A SAFE PLACE FOR FUTURE REFERENCE.
READ ALL INSTRUCTIONS BEFORE ASSEMBLY
AND USE OF THE WALKER.
KEEP INSTRUCTIONS FOR FUTURE USE.
THE CHILD MAY BE HURT IF YOU DO NOT FOLLOW
THESE INSTRUCTIONS.
READ THE INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP THEM FOR FUTURE REFERENCE. THE CHILD MAY
HURT IF YOU DO NOT FOLLOW THESE INSTRUCTIONS.
NEVER LEAVE THE CHILD UNATTENDED. ALWAYS KEEP CHILD IN VIEW WHILE IN WALKER.
THE CHILD WILL BE ABLE TO REACH FURTHER AND MOVE RAPIDLY WHEN IN THE BABY WALK
WARNING:
20204000010031_v4

ATake out parts from poly bags.
B
Repeat the process until
three plastic legs are
completely fixed.
lastic leg
Plug the plastic legs onto the up tray
hen put the lid on and screw.
id
arts
se your thumb to press the
button until a “click” sound. to adjust height
lick
C
E
Insert wheels into holes in
the corner bottom of
.
Then plug stoppers
and press
until well
fixed.
topper
DCo the seat
frame
eat
nsert plastic rings in the fixed
holes ull down to
.
ixed
hole
astic
ring
Push up
Then turn to fasten
1
2
B
A
NEVER LEAVE THE CHILD UNATTENDED.
SUITABLE FOR CHILD BETWEEN 6-36 MONTHS.
WARNING:
MADE IN TAIWAN
P toy tray on the up tray, then use tray lock to
the toy tray
CAUTION! Non-rechargeable batteries are not to be recharged.
Rechargeable batteries are to be removed from the toy before
being charged. Rechargeable batteries are only to be charged
under adult supervision. Different types of batteries or new and
used batteries are not to be mixed. Batteries are to be inserted
with the correct polarity. Exhausted batteries are to be removed
from the toy. The supply terminals are not to be short-circuited.
Please follow the instructions to remove and insert the batteries.