Dream On Me Coast Rider User manual

Read all instructions before
assembling and using product.
IMPORTANT - Keep Instructions
for future use. 0722R1-365
Owner’s Manual
COAST RIDER
Scan the QR code to register your product
https://dreamonme.com/customercare/registration/

2www.dreamonme.com/help
…. for choosing Dream On Me and congratulations on joining our family;
a family that has been transforming lives for over 30+ years!
We appreciate your feedback and wish you the very best in the
coming years with your new addition. If you have any questions
or concerns please don’t hesitate to reach out to us. One of our
trusted Customer Care representatives will be happy to assist you.
Thank you again for entrusting us to provide you with safe
and affordable baby products and accessories.
THANK YOU...
LIMITED WARRANTY:
• Dream On Me warrants its product to be free from defects in material and
workmanship and agrees to remedy any such defect.
• This warranty covers 1 year from the date of original purchase.
• This warranty is valid only upon presentation of proof of purchase.
• This is solely limited to the repair or replacement of defective furniture
components and no assembly labor is included.
• This warranty does not apply to any product which has been improperly
assembled, subjected to misuse or abuse or which has been altered or
repaired in any way.
• This warranty gives you specific legal rights and you may also have other
rights which vary from State to State.

3
www.dreamonme.com/help
WARNINGS
IMPORTANT!
• PLEASE SAVE INSTRUCTION MANUAL FOR FUTURE USE.
• Failure to follow these warnings and the assembly instructions could result in
serious injury or death.
• Please read the instructions thoroughly, identify all parts and hardware.
• To clean the surface use only water or damp cloth. Do not use any cleaner or
cleaning abrasive as it will scratch the surface and may damage the protective
coating.
• Contact Dream On Me in case of any assistance required.
• Use Dream on Me Coast Rider Canopy (Sold Separately) & Connector (Sold
Separately) for a safer ride.
• ADULT ASSEMBLY REQUIRED.
• DO NOT use the product if its broken, damaged and/or the components are
missing or broken.
• NEVER LEAVE CHILD UNATTENDED: Always keep child in view while in stroller.
• AVOID SERIOUS INJURY: caused from falling or sliding out. Always secure the
child with the safety harness. After fastening buckles, adjust belts/harness to get
a snug fit around your child.
• AVOID FINGER ENTRAPMENT: Be aware and careful during folding and
unfolding the stroller. Be certain that the stroller is fully erect and latched/locked
before allowing your child near the stroller. Keep the child away from the pinch
points during folding and unfolding the stroller. When unfolding the stroller lock
and listen to the ‘Click’.
• NEVER USE STROLLER ON STAIRS OR ESCALATORS: You may suddenly lose
control of the stroller or your child may fall out. Also, use extra care when going
up or down a step or curb.
• AVOID STRANGULATION: DO NOT place items with a string around your child’s
neck, suspend strings from this product, or avoid attaching strings to toys.
• USE OF THE STROLLER: A child weighing more than 45 lbs (20.5 kg) or taller
than 37.8 inches (96cm) will cause excessive wear and stress on the stroller. Use
the stroller with only one child at a time.
• PREVENT A HAZARDOUS, UNSTABLE CONDITION: Never place purses,
shopping bags, parcels or accessory items on the handle (other than approved
bags stroller bags). Never place anything on the canopy (SOLD SEPARATELY).
• PREVENT A HAZARDOUS, UNSTABLE CONDITION: Do not place more than 10
lbs (4.5 kg) total in any universal add-on storage basket including the 2 lbs (1 kg)
in the basket pocket.

4www.dreamonme.com/help
WARNINGS (cont.)
• AVOID BURNS: Never put hot liquids in any universal add-on cup holders.
• PREVENT TIPPING: Do not place more than 3 lbs (1.36 kg) total in any universal
add-on cup-holders/snack tray.
• DO NOT use any universal add-on storage basket as a child carrier.
• DO NOT ALLOW your child to stand on any universal add-on basket. It may
collapse and cause injury.
• NEVER PLACE a child in the stroller with head toward the footrest.
• NEVER ALLOW YOUR STROLLER to be used as a toy.
• DISCONTINUE THE USE OF STROLLER if damaged or broken.
• STROLLER MUST ONLY BE USED at walking speed. Product is not intended for
use while jogging, skating, etc.
• CAREGIVERS MUST always help children get into and out of the stroller.
• THE STROLLER IS DESIGNED FOR USE ON FLAT OR GENTLY SLOPING
SURFACES, AND MAY BE UNSTABLE ON HIGHER SLOPING AND UNEVEN
SURFACES. USERS SHOULD BE AWARE OF THE POSSIBILITY OF THE
STROLLER ROLLING AWAY OR TIPPING OVER: The Rider stroller has been
approved in accordance with ASTM F833: 15.
• THE FRONT WHEELS MAY WOBBLE OR OSCILLATE WHEN WALKING FAST.
• THE STROLLER CAN BE TAKEN UP CURBS BY EITHER PRESSING DOWN ON
THE HANDLES AND RAISING THE FRONT WHEELS AND MOUNTING THE
CURB, OR TURNING THE STROLLER AROUND AND PULLING THE STROLLER
UP THE CURB.
• CAUTION IS REQUIRED WHEN PUSHING THE STROLLER ACROSS STEEP
SLOPES OR UNEVEN SURFACES THIS MAY CAUSE STROLLER TO BECOME
UNSTABLE AND FALL OVER. ALWAYS HOLD THE HANDLES FIRMLY.
• DO NOT RUN WITH THE STROLLER.
• WHENEVER YOU STOP, ALWAYS APPLY THE BRAKES BEFORE YOU LEAVE
THE STROLLER.
• DO NOT HANG BAGS OR GOODS FROM THE HANDLE AS THIS COULD
CAUSE THE STROLLER TO TIP OVER.
• THE UPRIGHT POSITIONS ARE NOT SUITABLE FOR A CHILD UNDER 6
MONTHS OLD.

5
www.dreamonme.com/help
PART DETAILS
Adjust Button
Handle
Handle Tube
Seat
Harness
Folding Plastic
1st Lock
2nd Lock
Storage Latch
Brakes
Rear Wheel
Front Wheel
Join Point
Guard Rail
Guard Rail
Support

6www.dreamonme.com/help
PARTS
If there are any missing parts, please contact Dream On Me before using the
product.
Frame
1 2 Seat Cushion
with Safety Harness
3Guard Rail
Connector
(SOLD SEPARATELY)
(SOLD SEPARATELY)
4 5 Front Wheels 6Rear Wheels
T-Bar
7 8 Seat Base 9Canopy

7
www.dreamonme.com/help
1
STROLLER ASSEMBLY - SEAT FRAME ASSEMBLY
1a. Open the storage latch attached to the
seat base (8) and lift up the handle of
the stroller until you hear a ‘Click’ as
shown in the illustration.
1b. Make sure the handle is firm and
locked into its place.
“Click”
(1)

8www.dreamonme.com/help
2
STROLLER ASSEMBLY - WHEELS ASSEMBLY
2a. Insert both the front wheels into the mounting
post at the front of the seat base (8) until they
click into the base as shown in the diagram.
2b. Make sure the wheels are secured and locked
into its place by tugging on it.
2c. For easy transport or storage, push the wheel
release tab on the side of the stroller frame
and pull the wheel off the stroller.
2d. Similarly, attach both rear wheels as shown in
the illustration, for easy mobility or storage,
push the pin lock mechanism and remove the
rear wheels.
“Click”
“Click”
“Click”
(5)
(6)
(6)

“Click”
9
www.dreamonme.com/help
3
STROLLER ASSEMBLY - SEAT CUSHION ASSEMBLY
3a. Place the Seat Cushion with safety
Harness (2) on the Seat base of fully
opened and locked stroller frame and
secure the same into its place.
3b. Secure them by attaching the flaps
present at the bottom and straps
present behind the seat cushion, lock
the buckles, make sure you hear a
‘Click’. Refer to the diagram and make
sure the attachment is firm and
secured.
(8)
(2)

“Click”
10 www.dreamonme.com/help
4
STROLLER ASSEMBLY- GUARD RAIL ASSEMBLY
4a. Press the button on the
Guard Rail (3) and insert the
Guard Rail (3) into the
insertion present at the
center of the above
assembled seat as shown in
the illustration and and push
until you hear a ‘Click’.
4b. Adjust the straps behind the
Seat Cushion (2) and secure
them by fastening the
buckles on the straps
present behind. Ensure to
hear a “Click’. “Click”
“Press”
(2)
(3)

11
www.dreamonme.com/help
FOLDING THE STROLLER
1. Press the button present on the
Guard Rail Support (3) to remove.
2. Open the buckles behind the Seat
Cushion (2).
3. Press the button on the handle and
push the handle downwards as
shown in the diagram.
“Press”

12 www.dreamonme.com/help
FOLDING THE STROLLER (cont.)
4. Press the 1st lock and pull up.
5. Hold the 2nd lock up in the place in
order to lower the seat to a folding
position as shown in the diagram.
1st Lock
2nd Lock
“Press”
“Pull”
Storage Latch

13
www.dreamonme.com/help
STROLLER SAFETY HARNESS
1. Slide the shoulder strap onto the top of
the waist strap latch - Repeat for the
other side.
2. Insert the shoulder/waist strap latch
assembly into the buckle - Push until
you hear a “Click”.
3. Repeat for the other side.
Shoulder Straps
Shoulder Straps
Buckle Housing
Buckle Housing
Waist
Strap
Waist
Strap
Waist
Strap
Waist
Strap
Crotch Strap
Crotch Strap
1 1
2
1+21+2
3
3
2
Bar Slider

14 www.dreamonme.com/help
STROLLER SAFETY HARNESS AND BRAKES (contd.)
4. To adjust the shoulder and waist straps
slide the strap adjusters as shown.
5. Press the center buckle to release the
harness.
6. Push the brake rail down to park the
stroller. Lift the brake rail up to release
the brakes as shown in the figure.
WARNING:
• Always apply the brakes when the
stroller is stationary.
• Replace the last image of brakes with
the below.
Brakes Brakes
LoosenTighten

15
www.dreamonme.com/help
GUARD RAIL ONLY MODE
1. Press the button in Guard rail to detach
the same, remove the Seat Cushion
and the seat base.
2. Re-attach the Guard Rail to the stroller
Frame.
NOTE:
• FOR KIDS MORE THAN 3 YEARS OLD,
YOU MAY USE T-BAR OR GUARD RAIL
WITHOUT SEAT.

Detach the Guard Rail from Guard Rail
Support Tube as shown in the illustration.
Press the T-Bar quick release button and
insert the T-Bar into Guard Rail Support
Tube.
WARNING:
This using position is ONLY for child older
than 36 months.
16 www.dreamonme.com/help
T-BAR GUARD RAIL MODE
“Press”
(7)

Detach the guard rail, fold the Coast Rider
and ensure that the storage latch is
engaged.
Insert the handle for the T-Bar into the
seat frame. The Coast Rider Stroller
should like the illustration.
WARNING:
This using position is ONLY for child older
than 36 months.
17
www.dreamonme.com/help
SCOOTER MODE
Storage Latch

1. Insert the support bar into the fabric cover
(Fig 1 & 2).
2. Hold the support bar from the back of the
connector (Fig 3), then put the end of the
support bar into the connector with another
hand (Fig 4 & 5).
3. For the other side, pull out the center of the
support bar slightly and insert the support
bar into the connector (Fig 6).
Kindly ensure to use the Dream On Me Coast Rider
Stroller Canopy (STYLE NO:364) (SOLD SEPARATELY)
18 www.dreamonme.com/help
CANOPY MODE
Fabric
Cover
Connector
4
3
2
1
56

4. Adjust the support bar into place (Fig. 7).
5. Attach the holder to the handle bar
connector. The cylinder on the handle bar
should be aligned with the hole in the
bracket (Fig 8).
6. Try to move the fixing buckle towards the left
untilcompletely ejected (Fig 9). Try to wobble
or shake the assembly to ensure it is secured
in its place and does not fall off.
7. To adjust the Canopy, press the metal pin
inwards to adjust the height of the angle of
the Canopy (Fig 10 & 11).
8. To remove tha canopy, press the button and
lift the fixing buckle toward the side to open
(Fig 12).
19
www.dreamonme.com/help
CANOPY MODE (Cont.)
7
8
9
12 1011
Handle
connector
Buckle
Kindly ensure to use the Dream On Me Coast Rider
Stroller Canopy (STYLE NO:364) (SOLD SEPARATELY)

1. The connector can be used for most
compact baby strollers.
2. Press the quick release button on the
connector to connect it to the rider as shown
in the illustration (Fig 1 & 2).
3. To attach the connector to the rear leg of
your baby stroller, use the strap located on
the other end of the connector.
4. Make sure the velcro is securely fastened as
shown in the illustration.
5. Similarly, to detach the connector, remove
the velcro and straps and press the quick
release button to remove it.
ATTENTION:
• When using rider join point on the left side, then
connect to the stroller's right rear leg. When using
rider join point on the ride side, then connect to the
stroller's left rear leg.
• Make sure to use Dream On Me strollers with the
connector for enhanced safety.
20 www.dreamonme.com/help
STROLLER CONNECTOR MODE
2
1
(4)
(4)
(4)
Kindly ensure to use the Dream On Me Coast Rider
Stroller Connector (STYLE NO:363) (SOLD SEPARATELY)