
Items Included:
1) Concrete op
2) Concrete Base
3) Burner Pedestal
4) Burner Assembly Kit with Manual
5) Ignition Key
6) Lava Rock
Assembly Instruction:
1) Place concrete fire pit outside on a flat stable
surface. Location must be at least 24 inches (2 feet)
away from combustible construction on all sides.
Refer to Kingsman manual.
2) Place burner pedestal securely on the ground
3) Place concrete base over the top of the pedestal with
the pedastel in the center.
4) Place burner on top of the pedestal.
5) Attach connections (if required)
5) Place concrete top on to concrete base. Ensure the
top locks on the corners.
6) Place lava rock over the burner no deeper than 2”
7) If river rock of other media purchased place on top of
lava rock as a thin layer.
Care and Maintenance:
Concrete will weather naturally when left outside. his natural patina will occur over time.
o reduce the effects of weather it is recommended to cover the unit when not in use.
o clean the concrete use a sponge and soap, or hose it down.
Do not use heavy abrasives as they will scratch the surface.
Thank you for purchasing a uality concrete product by DreamCast.
Please refer to the assembly instructions below and the operation manual included with your burner
assembly.
DreamCast Design and Production - Quality Concrete Products
2/3