Dru Global 90 cf User manual

English

Global 90 CF, Global 70XT CF

‘Concise installation Guide’

Please retain this document carefully

Instructions for installation

959.023.04.UK

UKUK

2

English

concise installation

Contents

What do you need for installation? 3

Steps to take: 3

Disclaimer: 3

Main parts 4

The six installation possibilities 5

Gas technical installation 8

UK

3

English

concise installation

What do you need for installation?

No. Installation possibilities Engine Twigs or

pebbles

Frame Alpha

or Beta*

Built-in

plaster

trim**

IExisting chimney, liner less With frame X X X

II Frameless X X X

III Existing chimney, ﬂue liner With frame X X X

IV Frameless X X X

VNew chimney breast,

ﬂue pipe Ø100

With frame X X X

VI Frameless X X X

* Or other ﬁnishing trim or i.e. marble slabs

** The ‘plaster trim’ is always necessary in case of ‘frameless’ installation.

Steps to take:

1. Choose the installation that is applicable for this job

2. Check all necessary parts to be present

3. Follow the steps indicated in this Concise Installation Guide.

These give a general impression of the installation of the ﬁre. For more detail please refer to

the Installation Manual.

Disclaimer:

• This guide does not replace the Installation Manual and should be read in conjunction with the installation ma-

nual

• The Installation Manual gives additional safety warnings and tips.

• DRU or its agent/importer does not accept any responsibility for installation errors

UK

4

English

concise installation

Main parts

Burner

Combustion chamber

Spoiler on topside

Convection box

Frame Bèta

Debris shield

Built-in plaster trim

Gas control box

Flue spigot

Frame Alpha

UK

5

English

concise installation

The six installation possibilities

B

A

1

3

2

I Class 1 chimney, linerless with frame

1 Position convection box and fix to the wall

2 Mount debris shield

3 Gastechnical installation, then mount frame

Min.

180

2

1

4

3

A

B

II Class 1 chimney, linerless and frameless

1 Mount built-in plaster frame on the convection box

2 Position convection box and fix to the wall

3 Mount debris shield

4 Gastechnical installation then place cover panel

Min.

180

Dimentions gap (mm)

(see for opening battybox

installation instructions)

G90 G70

A Min 922 734

Max 932 744

B Min 401 662

Max 411 672

Dimentions gap (mm)

G90 G70

A Min 915 726

Max 920 731

B Min 395 656

Max 400 661

UK

6

English

concise installation

3

1

2

B

A

III Class 1 chimney, with flex flue liner and frame

1 Position convection box and fix to the wall

2 Mount flex flue liner

3 Gastechnical installation, then mount frame

Min.

180

2

3

1

4

1 Mount built-in plaster frame on the convection box

2 Position convection box and fix to the wall

3 Mount flex flue liner

4 Gastechnical installation then place cover panel

A

B

IV Class 1 chimney, with flex flue liner and frameless.

Min.

180

Dimentions gap (mm)

(see for opening battybox

installation instructions)

G90 G70

A Min 922 734

Max 932 744

B Min 401 662

Max 411 672

Dimentions gap (mm)

G90 G70

A Min 915 726

Max 920 731

B Min 395 656

Max 400 661

UK

7

English

concise installation

1 Position convection box and fix to the wall

2 Mount flue pipe

100

3 Gastechnical installation, then make false chimney breast

4 Mount frame

1

2

3

4

A

B

V False chimney breast, flue pipe

100 and frame.

Min.

180

1

2

3

4

1 Position convection box and fix to the wall

2 Mount flue pipe

100

3 Mount built-in plaster frame on the convection box

4 Gastechnical installation, then make chimney breast

VI False chimney breast, flue pipe

100 and frameless.

A

B

Min.

180

Dimentions gap (mm)

G90 G70

A Min 915 726

Max 920 731

B Min 395 656

Max 400 661

Dimentions gap (mm)

(see for opening battybox

installation instructions)

G90 G70

A Min 922 734

Max 932 744

B Min 401 662

Max 411 672

UK

8

English

concise installation

Gas technical installation

In case of frameless ﬁrst mount the 4 proﬁles of

the plaster trim

Proﬁle with spoiler on top. The studs

should be in the center of the hole!

Gas supply pipe under bottom of gas control box.

Fix to wall

Mount the convection box to the wall(see installation ma-

nual for disassembling the appliance)

Remove tie- wrap

UK

9

English

concise installation

Mount gas control box to convection box Mount gas control box to convection box

Connect the ﬂexible gas pipe to the gas suply with an elbow

Connect the reciever to gas control (Global 90 CF)

Connect the receiver to the gas control (Global 70XT CF)

Place burner in convection box

UK

10

English

concise installation

Fix burner with screws

(which were removed before)

Fix burner with screws

Place debris shield

(linerless application only)

Pull through ﬂex ﬂue liner (ﬂue liner only)

Use the ﬂat topped screws

(Linerless application only)

Use the inner holes

(Linerless application only)

UK

11

English

concise installation

Mount ﬂex ﬂue line in ﬂue spigot (ﬂue liner only Place ﬂue spigot in top of convection box

(in case of ﬂue liner no debris shield)

Mount ﬂue spigot with 2 screws Slide combustion chamber into convection box

Put vermiculite tray in placeFix with two screws (left and right)

UK

12

English

concise installation

Pay attention to slide in right position and place

window (see instruction manual)

Bèta frame only: use the drilling jig

to mark 4x drill spots (see included installation sheet)

Bèta frame only: drill 4 holes and mount brackets

on the drilled holes (see included installation sheet)

Alpha frame only: mount the 4 brackets

on the ﬂange as shown (see included installation sheet)

Put vermiculite tray in place

UK

13

English

concise installation

Notities / Notes / Notizen

....................................................................................................................................................................................................................

UK

14

English

concise installation

14

Notities / Notes / Notizen

....................................................................................................................................................................................................................

UK

15

English

concise installation

15

Notities / Notes / Notizen

....................................................................................................................................................................................................................

UK

16

English

concise installation

DRU Verwarming B.V.

The Netherlands

Postbus 1021, NL-6920 BA Duiven

Ratio 8, NL-6921 RW Duiven

959.023.04.uk

UK

schornsteinmarktR

Die ganze Welt des Feuers

Schornsteine Kamine Garten

Themenwelten

% Sale

Dieses Dokument wird durch Schornsteinmarkt.de zur Verfügung gestellt.

• Schornsteinbausätze

• Schornsteinverlängerungen

• Wanddurchführungen

... und vieles mehr!

• Gartenkamine

• Holzbacköfen

• Feuerschalen

... und vieles mehr!

• Kaminöfen

• Pelletöfen

• Holzherde

... und vieles mehr!

• Sonderanfertigungen

• Pflege & Reinigung

• Holzbearbeitung

... und vieles mehr!

Stark reduziert:

Markenprodukte

im Sale-Bereich

... und vieles mehr!

www.schornsteinmarkt.de

Im Expertenmagazin berichten wir praxisnah

und objektiv über Kamin- und Ofentechnik,

Schornsteinbau, Entwicklungen der Branche,

Produktneuerungen und geben wertvolle

Tipps und Anleitungen zum selber machen.

www.schornsteinmarkt.de/rauchzeichen

Dru Global 90 CF User manual

Popular Indoor Fireplace manuals by other brands