DSE DK-WP4-DVR User manual

Document: DK-WP4-DVR2I0
Page: 1
USER'S MANUAL DK-WP4-DVR Camera with clock video recorder
DSE srl - Digital Surveillance Equipment - www.dse.eu
DK-WP4-DVR
Camera and video recorder in
wall clock
Product description
DK-WP4-DVR is a video recorder equipped with a camera
integrated in a working wall clock.
1. Target
2. PIR presence detector
3. Clock time adjustment
4. AA battery compartment for clock
5. Reset button
6. MicroSD card slot
7. USB port for charger
8. Camera power switch
9. Status LED
Use as a watch
DK-WP4-DVR is an investigative camera but it is also a
real wall clock perfectly functional so as not to arouse any
suspicion.
To adjust the clock, do the following:
1. Insert an AA battery into compartment 4
2. Turn the wheel (3) to adjust the time
Battery powered
The camera is able to operate with only the power supply
of its internal 3Ah battery which allows about 6 hours of
recording. To save the battery, the camera has a front
presence detector (2) which warns the camera of the
presence of people in the room. Thanks to this sensor, the
camera normally remains in Stand-By when there are no
people, consuming very little battery and starts recording
only when an intrusion is detected.
The internal battery allows the camera to have a stand-by
autonomy of over 4 months.
Mains power supply
The DVR can also operate on mains power with the
included 220V / USB power supply.
In this case, the USB cable is kept connected even during
operation. The LED (9) lights up during charging.
Movie storage
The video files are stored on a micro SD card (not
supplied).The movies have Full HD 1920x1080 resolution
at 25 f / sec. and are saved in MOV format with H264
compression
It is possible to use micro SD cards of any brand up to
128 GB of capacity.
1 hour of recording occupies an average of 6.6GB so on a
128GB SD card you can hold over 19 hours of recording
hours.
Obviously, thanks to the presence detector, the DVR can
monitor the room for much longer because it records only
in the presence of people.
Once the memory has run out, the DVR will automatically
overwrite the oldest files if programmed in this way in the
configuration.
Inserting the micro SD card
The first thing to do is insert the micro SD card into the
appropriate slot in the DVR (6)
It is possible to use micro SD cards with capacities up to
128 GB in CLASS 10 or higher. For added security, it is
advisable to format the microSD card in FAT32 with a
computer before inserting it into the DVR.
A class 10 SD card has a write speed of 10 MB / s. Do not
use SD cards with slower speeds as they will lead to
malfunctions.
Pay attention to the insertion direction of the SD card
which will slide into its seat only with the gold contacts
facing the reset button.
No micro SD card is included in the package.
Internal battery charging
Before using the device, it is advisable to fully charge the
battery. To do this, connect the USB port of the DVR to
the computer or to the USB power supply with the cable
supplied.
Full charging takes several hours depending on the initial
charge state. We recommend that you comfortably let the
charging complete overnight.
Next to the USB socket there is a LED (9) which lights up
during charging.
Registration
To record, all you need to do is turn switch 8 to the ON
position. The camera will operate and record for 3 minutes

Document: DK-WP4-DVR2I0
Page: 2
USER'S MANUAL DK-WP4-DVR Camera with clock video recorder
DSE srl - Digital Surveillance Equipment - www.dse.eu
each time the front PIR sensor is detected. When no
human presence is detected in the room, the camera goes
into stand-by and waits for a new intrusion.
Movie playback on PC
A computer and SD card reader (included) is required to
review and manage the files recorded by the DVR.
You need to turn off the DVR with the ON / OFF switch.
remove the micro SD card and insert it into a computer
SD card reader.
It is possible to copy the videos to the PC and play them
with any video player (VLC - VideoLan recommended).
ATTENTION: It is not possible to download the files
through the USB cable of the DVR because this is used
only for recharging / powering the device.
Date and time setting and options
To set the system date and time and to configure the
operating options, a text file called TIME.TXT is used,
which you will find in the root directory of the SD card
after making recordings. If you open it with notepad you
will see this content:
Resolution = 0; (0 = 1080P, 1 = 720P; 2 = 480P)
Audio_Record = 1; (0 = Off, 1 = On)
Loop_Record = 1; (0 = Off, 1 = On)
Record_Time = 1; (0 = 1min, 1 = 3min, 2 = 5min, 3 =
10min)
Motion_Level = 0; (0 = highest, 1 = high, 2 = middle, 3 =
low, 4 = lowest)
Motion_Time = 1; (0 = 1min, 1 = 3min, 2 = 5min, 3 =
10min)
Date_Stamp = 1; (0 = Off, 1 = On)
Time_set = N2020 / 01/01 00:00:00; (Y = change N = No
change)
Each option has its factory choice alongside, for example
the resolution is equal to 0, which means 1080P
You can change each option by following the directions on
the side
RESOLUTION - Sets the resolution of the recording,
factory default 0 = 1080P
AUDIO RECORD - Sets whether to record audio, factory
default 1 = audio active
LOOP RECORD - Sets the automatic overwriting when the
memory is full, factory 1 = active
RECORD TIME - Sets the duration of the video in
continuous recording, factory 1 = 3 minutes
MOTION LEVEL - Sets the sensitivity of the motion
detection, factory default 0 = maximum
MOTION TIME - Sets the duration of motion recording
videos, factory default 1 = 3 minutes
DATE STAMP - Enables the overlay of date and time, by
default 1 = enabled
TIME SET - Set date and time as in the following example
Time_set = Y2020 / 09/26 19:15:00; (Y = change N = No
change)
The appliance will accept the new settings at the next
start. Be careful not to change the punctuation and spaces
in the file or the settings will be invalid. Note that the time
setting is only valid for a switch on as the appliance is not
able to keep it from switched off.
Main technical characteristics
Sensor CMOS
Maximum resolution FullHD 1080p (1920x1080)
Frame rate 30 f / sec
Video format MOV (H264 compression)
Overlay Date time (excludable)
Functions Recording on PIR detection
Audio microphone Incorporated
Video storage About 19 hours on 128GB at
1080P
Operating
temperature -5 ° + 40 ° C
Internal battery 3Ah 4 months in stand-by
Memory MicroSD Class 10 or higher
Memory capacity 4..128 GB