DSIC DS5 Series Technical manual
DS5 Series
OS Update How-to
Windows CE6.0 and Windows Embedded Handheld 6.5 (Classic & Professional)
August 05, 2014
ISO 9001 Certified
Quality Management System
DS5 Series OS update how-to August 2014 2
○
C 2014 DSIC Co., Ltd.
All Rights Reserved.
Notice
While reasonable efforts were made to ensure that the information in this document was
complete and accurate at the time of printing, DSIC Co., Ltd. can assume to no liability for any
errors. Changes and corrections to the information in this document might be incorporated in
future release.
Document disclaimer
DSIC Co., Ltd. Is not responsible for any modifications, additions, or deletions to the original
published version of this documentation unless Customer and/or End User agree to indemnity
and hold harmless DSIC, DSIC’s agents, servants, and employees against all claims, lawsuits,
demands and judgments arising out of, or in connection with, subsequent modifications, additions
or deletions to this documentation to the extent made by the Customer or End User.
Link disclaimer
DSIC Co., Ltd. is not responsible for the contents or reliability of any linked Web sites referenced
elsewhere within this documentation, and DSIC does not necessarily endorse the products,
services, or information described or offered within them. We cannot guarantee that these links
will work all the time and we have no control over the availability of the linked pages.
Warranty
DSIC Co., Ltd. provides a limited warranty on this product. Refer to your sales agreement to
establish the terms of the limited warranty. In addition, DSIC’s standard warranty language, as well
as information regarding support for this product, while under warranty, is available through the
DSIC Support Web site: http://www.mobilebase.co.kr
Copyright
Except where expressly stated otherwise, the Product is protected by copyright and other laws
respecting proprietary rights. Unauthorized reproduction, transfer, and or use can be a criminal, as
well as a civil offense under the applicable law.
Third-party components
Certain software programs or portions thereof included in the Product may contain software
distributed under third party agreements (“Third Party Components”), which may contain terms
that expand or limit rights to use certain portions of the Product (“Third Party Terms”).
DS5 Series OS update how-to August 2014 3
Trademarks
All other trademarks are the property of their respective owners.
Downloading documents
For the most current versions of documentation, see DSIC support Web site:
http://www.mobilebase.co.kr
Contact DSIC Support
DSIC Co., Ltd. provides a technical support email account for you to report problems or to ask
support, See the DSIC Web site: http://www.mobilebase.co.kr
DS5 is a trademark of DSIC Co., Ltd.
Mobile Base is a brand name of DSIC rugged mobile computer..
Windows○R and the Windows Logo are trademarks or registered trademarks of Microsoft Corporation
The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc.
All trademarks and trade names are the property of their respective owners.
DS5 Series OS update how-to August 2014 4
Contents
Chapter 1: Terminal .................................................................................................................................................................. 5
DS5 and DS5 wide Front View ........................................................................................................................ 5
Keypad ..................................................................................................................................................................................... 6
Chapter 2: Install Micro SD card ...................................................................................................................................... 7
Installation micro SD card .............................................................................................................................................. 7
Chapter 3: Operating Power of the Terminal ........................................................................................................... 8
Power On and Off................................................................................................................................................... 8
Suspend and Resume ........................................................................................................................................... 8
Reset ............................................................................................................................................................................... 8
Chapter 4: Clean Boot............................................................................................................................................................. 9
Clean Boot ............................................................................................................................................................................. 9
Chapter 5: OS Update How-To ....................................................................................................................................... 10
OS Update - Windows CE6.0/ WEH6.5/DS5/DS5 Wide respectively...................................... 10
OS Update from Windows CE6.0 to WEH6.5 (DS5)............................................................................ 10
OS Update from WEH6.5 to Windows CE6.0 (DS5) ........................................................................... 11
DS5 Series OS update how-to August 2014 5
Chapter 1: Terminal
DS5 and DS5 wide Front View
Receiver
Scan Triggers
Reset button
LCD Back Light
Controller
Scan LED Indicator
Charging LED Indicator
Network LED Indicator
(Phone only)
Micro phone
Modifier LED Indicator
3,5” Display
4.3” Display
DS5 DS5 wide
Scanner Window
Power button
DS5 Series OS update how-to August 2014 6
Keypad
DS5 series comes with large numeric keypad including function 1~10, full alphanumeric keypad
Numeric Keypad
Full Alphanumeric Keypad
DS5 Series OS update how-to August 2014 7
Chapter 2: Install Micro SD card
Installation micro SD card
Insert the micro SD card carefully as shown in the following illustrations. Make sure the micro SD
card terminal position before insert the micro SD card. Push the back end of the micro SD card to
fix it at the last step.
Note
Do not use the power too much when you insert the micro SD card. The micro SD card may be damaged
If you install the micro SD card in the wrong position, the micro SD card may be damaged or it may cause the
malfunction of the micro SD card Slot.
Keep the terminal part of the micro SD card in clean. Be careful the terminal part of the micro SD card not to
dusty
As the micro SD card is consumable, the micro SD card end its days and may be not able to save data if you
use it more than over certain times. In this case, replace micro SD card to buy a new one.
DS5 Series OS update how-to August 2014 8
Chapter 3: Operating Power of the Terminal
Power On and Off
Make long press Power button to turn on, or off the terminal.
Select OK confirmation message, when you make long press to turn off the terminal
Suspend and Resume
Press power button shortly to enter Suspend, or Resume the terminal
Reset
If the terminal stops responding, try reset to kill running applications. To reboot the terminal press
RESET button. Your data in storage will be retained in terminal while not saved data will be in lost.
DS5 Series OS update how-to August 2014 9
Chapter 4: Clean Boot
Clean Boot
Cold boot also enables to kill all running applications. However, it deletes all stored data and
entries in RAM. It makes the terminal to factory default status. Try Reset first if the terminal is not
responding.
Caution
Clean boot set the terminal to factory default settings. All applications and stored data will be erased. Do not clean boot
without your IT administrator’s support.
Short press RESET button, while pressing and button simultaneously until DSIC
boot image displayed.
Note
The following table presents the results for different types of booting
Type of boot
key Registry Nand folder RAM (excepting Nand)
Factory reset + , reset Cleared Cleared Cleared
Clean + , reset Cleared Retained Cleared
Cold
+ Reset,
(back up battery fully discharged)
Retained Retained Cleared
Warm reset Retained Retained Retained
DS5 Series OS update how-to August 2014 10
Chapter 5: OS Update How-To
Caution - When you use OS update with micro SD card, please make sure the card is
formatted, and battery is fully charged.
OS Update - Windows CE6.0/ WEH6.5/DS5/DS5 Wide respectively
1. Copy the firmware image to root folder of the SD card
eg) Windows CE6.0 : DS5CN-OS-STND-1-XXXXQCS-2014-07-10-375.bin
WEH6.5 : DS5MN-OS-GXQX-550.bin
2. Input micro SD card into terminal
3. While Pressing and holding together, short press RESET key for a
second to enter DSIC SD Download Screen.
When OS image file is copied and installed in complete, DONE will be displayed on the
screen.
4. After DONE message, press RESET button to enter Factory Reset or Clean Boot.
Your device will be restarted.
OS Update from Windows CE6.0 to WEH6.5 (DS5)
1. Copy the WEH6.5 firmware images(boot & OS) to root folder of the SD card
eg) DS5MN-BT-GXQX-550.nb0 (WEH6.5/DS5 boot)
& DS5MN-OS-GXQX-550.bin (WEH6.5/DS5 OS)
2. Input micro SD card into terminal
together, short press RESET key for a
3. While pressing and holding
second to enter DSIC SD Force Mobile Boot Download screen.
When boot image is copied and installed in complete, DONE will be displayed on the
screen.
4. While pressing and holding together, short press RESET key for a
second to enter DSIC SD Download Screen. It will take a minute.
When OS image is copied and installed in complete, DONE will be displayed on the
screen.
5. After DONE message like in above, press RESET button to enter Clean Boot.
Your device will be restarted.
DS5 Series OS update how-to August 2014 11
OS Update from WEH6.5 to Windows CE6.0 (DS5)
1. Copy the Windows CE6.0 firmware images(boot & OS) to root folder of the SD card
eg) ds5CeBoot-375.nb0 (Windows CE6.0/DS5 boot)
& DS5CN-OS-STND-1-XXXXQCS-2014-07-10-375.bin (Windows CE6.0/DS5 OS)
2. Input micro SD card into terminal
together, short press RESET key for a 3. While pressing and holding
second to enter DSIC SD Force WinCE Boot Download screen.
When boot image is copied and installed in complete, DONE will be displayed on the
screen.
together, short press RESET key for a
4. While pressing and holding
second to enter DSIC SD Download Screen. It will take few minutes.
When OS image is copied in complete, 100% will be displayed on the screen.
When OS image is installed in complete, DONE will be displayed on the screen.
5. After DONE message like in above, press RESET button to enter Factory Reset.
Your device will be restarted.
Table of contents
