DSM Delvotest Fast Go Max User manual

User Manual
Delvotest® Fast Go Max
DSM
Alexander Fleminglaan 1 2613 AX Delft,
The Netherlands

-1 -
Contents
Introduction........................................................................................ 2
1. The Use of User Manual...........................................................................................3
2. Please Be Well-informed before Using the Product ..............................................4
Product Description .......................................................................... 8
1. Characteristics of Product ......................................................................................8
2. Product Components and Installation Methods ....................................................9
2.1. Product Components ...............................................................................................................9
2.2. Installation Methods.............................................................................................................. 10
3. Running Delvotest® Fast Go Max........................................................................ 12
3.1. Instrument Registration........................................................................................................ 12
3.2. Supervisor Registration ........................................................................................................ 13
3.3. Log In ........................................................................................................................................... 14
3.4. Main Menu................................................................................................................................. 15
3.5. Test Mode .................................................................................................................................. 16
3.6. Test Results................................................................................................................................ 19
3.7. Manager...................................................................................................................................... 22
3.8. Instrument Check.................................................................................................................... 28
3.9. Thermal Printer......................................................................................................................... 30
4. Product Specification and After-sales Service ....................................................32
4.1. Product Specification............................................................................................................. 32
4.2. Troubleshooting and Maintenance................................................................................. 33
4.3. Product After-sales Service................................................................................................. 33

-2 -
Introduction
Thank you for purchasing Delvotest®Fast Go Max.
In order to prevent damage or loss of property, please read instructions and safety
guidelines in this user manual and be well-informed before using this reader.
Always have this user manual at hand in case of need.
(Effective version: 1.0.10 build 20180112)
▶Copyright© all rights reserved.
▶ Delvotest® Fast Go Max is a trademark of DSM.

-3 -
1. The Use of User Manual
Labels and symbols shown below are used throughout the user manual.
Label
Description
To indicate the direct current (DC).
CE mark –To indicate that this product is appropriate for the standard
of EU.
To indicate instruction manual.
The catalog number of this product.
The serial number of this product.
To indicate the manufacturer.
Biohazard –To indicate that biological substances may damage your
health.
Warning –To indicate that a user should read and consult accompanying
instruction.
Authorized representative in the European Community.
To indicate suitability of all in-vitro medical diagnostic equipment for
entering Europe market.
To indicate that this product should be stored within a certain
temperature range.
To indicate the date of manufacture.

-4 -
2. Please Be Well-informed before Using the Product
Precautions on Installation and Storage
(1) Appoint an administrator and let the administrator install and run this system.
An administrator should be medical professional, researcher or skilled operator with
responsibilities. If the administrator is a non-medical professional, the person is required
to keep confidentiality.
(2) Installation Method
①Check the rated voltage and connection of the power cord.
②Check the connection between the cable and the connector.
③Press power button to turn on the system.
- After the power is on, check the Power LED to see if it is working properly.
- If the system does not turn on, check the condition of the connector.
④To run the program and functions of this reader, follow test procedures guided in
this user manual. (Refer to Test Method)
(3) Cautions during Installation
①Install this product in a place where voltage, frequency and electric power
consumption are supplied appropriately.
- Use the adapter provided.
- The product may be damaged, in the case of an overvoltage or low voltage.
②Check the ground connection for grounding-type bipolar outlet.
③Be careful of reader malfunction, if there is a possible inflow of electromagnetic
waves.
④Avoid operating this reader nearby other equipment generating short waves or
CAUTION: Please read this user manual carefully and follow instructions for
installation.

-5 -
microwaves. This condition may affect the result.
⑤Check Location of Installation.
Install the reader in a place with humidity less than 90%.
Install the reader in a well-ventilated place with minimal dust.
Avoid any place where physical and chemical effect is possible.
Avoid direct sunlight.
Install the reader on a flat surface.
If room temperature is too high, an error may arise.
(Optimal operating temperature: 10~40℃)
The use of this reader with explosive, inflammable or putrefactive substances
is prohibited.
The use of this reader in a place with radiation, a magnetic field or a vacuum
is prohibited.
The use of this reader in a place with extreme electric noise is prohibited.
The Calibrator may be discolored under direct sunlight. It is recommended that
the calibrator is stored in a dark place.
Be careful not to extremely tilt or drop the reader during transfer.
Notice
This product optically analyzes the reaction between specific pathogenic organism and
reagent in the diagnostic process of specimen, and quantifies degree of the reaction
This system is for quantitative analysis of lateral flow immunochromatographic devices. The
system can be operated by a person of a non-medical field, but the result should be
interpreted and analyzed by medical professionals.
You can buy supplies like the calibrator and test devices from your supplier. Supplies should
be tested for adaptability with the system before it is actually used for the test. Information
about applicable supplies is available by contacting DSM.

-6 -
①Use this reader on a flat surface avoiding direct light.
②To prevent electric shock, check if the power supply is connected to the ground.
③Use supplies only from DSM to prevent product damage.
④Be careful not to block the air passage on the back of the reader.
⑤Be careful not to get burnt from the heat produced by the reader due to long-term
use.
⑥Do not use this reader in a place with shock and vibration.
⑦To prevent contamination of the reader, wait until all samples are absorbed into
the RDT (Rapid Diagnostic Test) device before you insert the device in the system.
⑧While you are operating the reader with the object of testing, prevent any vibrations
that affect the system.
⑨If there is any vibration affecting the system during the test, abort the process and
restart the test from the beginning.
⑩Do not open the tray during the test. If the device is exposed to the outside during
the test, abort the process and restart the test.
⑪When the test is completed, exit the program and turn off the system. If you turn
off the system before the program normally ends, it could affect the program and
unexpected errors could be generated.
⑫Be careful not to contaminate the reader when taking the device out of the reader.
Notice on Copyrights
①All rights are reserved by DSM.
②This user manual cannot be copied without permission. If it is used without
authorization, the user has to take legal responsibilities.
CAUTION: If you need an accurate result or have an important test to be done,
wait about 30 minutes after turning the system on and do the
calibration before the test (Refer to 3.2 Instrument Check).

-7 -
③We are not responsible for the damage occurred by not using appointed
standardized parts or using other software, which is not provided in the product
package.
④Specifications of this product can be changed due to company’s action for
improving convenience and product performance.
⑤You may not be compensated if it is not mentioned by manufacturer.
⑥Any problem occurred by not using equipment from the manufacturer cannot be
compensated.
⑦We are not responsible for any damage of the product caused by not following
cautions and warnings in this user manual.

-8 -
Product Description
1. Characteristics of Product
Delvotest® Fast Go Max , gives you quantitative assessment by capturing and analyzing
images of lateral flow immunochromatography. When the Rapid Diagnostic Test (RDT)
device is inserted into the tray, an internal camera captures and saves the image, and data
is automatically collected to be converted to a graphical analysis. Accurate and reliable
rapid diagnosis is possible since this product provides quantitative analysis through highly
sensitive image analysis based on LED and the high quality image sensor. Convenient
management of patient information is also possible by saving and transporting patient
information through a USB port. And the system provides printing function using built-in
thermal printer and network printer, you can print out test result through this function.
Intuitive user interface using touch pad controller with 10”color LCD makes it easy to
access and use.
Main Features
✓Quantitative analysis of various applications for POCT
✓Remote access for support
✓1D Barcode support
Convenient Features
✓Data management
✓Data printing
✓User management
✓Patient record management

-9 -
2. Product Components and Installation Methods
2.1. Product Components
Components provided in the product package are as following.
[Figure 2.1] Product Components
Product and parts composition of Delvotest® Fast Go Max.
▷AC/DC Adapter (12V, 5A output)
▷Power Cable
▷Touch Pen
▷Calibrator: for QC purpose only
▷User manual
※ If you have any questions or missing components, please contact DSM customer
services