manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. DTS
  6. •
  7. Light Fixture
  8. •
  9. DTS XR300 BEAM User manual

DTS XR300 BEAM User manual

This manual suits for next models

1

Other DTS Light Fixture manuals

DTS XR8 WASH User manual

DTS

DTS XR8 WASH User manual

DTS DELTA 12 HEAD User manual

DTS

DTS DELTA 12 HEAD User manual

DTS ALCHEMY 3 User manual

DTS

DTS ALCHEMY 3 User manual

DTS DIVE 6 User manual

DTS

DTS DIVE 6 User manual

DTS SCENA LED 200 MZ FC User manual

DTS

DTS SCENA LED 200 MZ FC User manual

DTS XR 8 Wash User manual

DTS

DTS XR 8 Wash User manual

DTS NICK NRG 501 User manual

DTS

DTS NICK NRG 501 User manual

DTS MOVIELIGHT User manual

DTS

DTS MOVIELIGHT User manual

DTS XR8 SPOT User manual

DTS

DTS XR8 SPOT User manual

DTS XR9 Spot User manual

DTS

DTS XR9 Spot User manual

DTS VICE R User manual

DTS

DTS VICE R User manual

DTS XR-LASER GREEN User manual

DTS

DTS XR-LASER GREEN User manual

DTS XR4 SPOT User manual

DTS

DTS XR4 SPOT User manual

Popular Light Fixture manuals by other brands

Veko Magnus manual

Veko

Veko Magnus manual

Cooper Lighting Halo L10538 specification

Cooper Lighting

Cooper Lighting Halo L10538 specification

Emos CLASSIC ZY1431T manual

Emos

Emos CLASSIC ZY1431T manual

Westinghouse Outdoor Lighting Fixture owner's manual

Westinghouse

Westinghouse Outdoor Lighting Fixture owner's manual

Hedler C 12 silent Operation manual

Hedler

Hedler C 12 silent Operation manual

Blizzard Lighting Puck: CSI manual 

Blizzard Lighting

Blizzard Lighting Puck: CSI manual 

Energetic Lighting ELYSL-5004 Series installation instructions

Energetic Lighting

Energetic Lighting ELYSL-5004 Series installation instructions

Lightmaxx Shaft 5R user manual

Lightmaxx

Lightmaxx Shaft 5R user manual

Triarch 31083 Assembly instructions

Triarch

Triarch 31083 Assembly instructions

Philips 32614 Series user manual

Philips

Philips 32614 Series user manual

IKEA TIVED Assembly instructions

IKEA

IKEA TIVED Assembly instructions

Lightolier LP200 specification

Lightolier

Lightolier LP200 specification

Chauvet Professional ROGUE R1 BEAM WASH user manual

Chauvet Professional

Chauvet Professional ROGUE R1 BEAM WASH user manual

Martin MAC 250 Krypton user manual

Martin

Martin MAC 250 Krypton user manual

Cooper Lighting Halo L3232E Specification sheet

Cooper Lighting

Cooper Lighting Halo L3232E Specification sheet

Stageline ODW-2410RGBW instruction manual

Stageline

Stageline ODW-2410RGBW instruction manual

Lightolier Paralyte 2424 PLA2G9LS26U specification

Lightolier

Lightolier Paralyte 2424 PLA2G9LS26U specification

Lightolier Lytespan 83ED17S specification

Lightolier

Lightolier Lytespan 83ED17S specification

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.

GB
Made in Italy
XR300 BEAM
User’s Manual Rel 1.2
D.T.S. Illuminazione srl - ITALY
http://www.dts-lighting.it
XR300 BEAM FAR E.B.
(Cod. 03.MB002.EB.LF)
• FAR system • CMY • Electronic ballast
XR300 BEAM FAR
(Cod. 03.MB002.LF)
• FAR system • CMY • Electromagnetic ballast
XR300 BEAM E.B.
(Cod. 03.MB002.EB.L)
• CMY • Electronic ballast
XR300 BEAM BF
(Cod. 03.MB003.L)
• Electromagnetic ballast
Le informazioni contenute in questo documento sono state attentamente redatte e controllate. Tuttavia
non è assunta alcuna responsabilità per eventuali inesattezze. Tutti i diritti sono riservati e questo
documento non può essere copiato, fotocopiato, riprodotto per intero o in parte senza previo consenso
scritto della D.T.S .
DTS si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche , funzionali o di
design a ciascun proprio prodotto. D.T.S non assume alcuna responsabilità sull’uso o sull’applicazione dei
prodotti o dei circuiti descritti.
The information contained in this publication has been carefully prepared and checked. However, no
responsibility will be taken for any errors. All rights are reserved and this document cannot be copied,
photocopied or reproduced, in part or completely, without prior written consent from D.T.S.
D.T.S. reserves the right to make any aesthetic, functional or design modifications to any of its products
without prior notice. D.T.S. assumes no responsibility for the use or application of the products or circuits
described herein.
Les informations contenues dans le présent manuel ont été rédigées et contrôlées avec le plus grand
soin. Nous déclinons toutefois toute responsabilité en cas d'éventuelles inexactitudes. Tous droits
réservés. Ce document ne peut être copié, photocopié ou reproduit, dans sa totalité ou partiellement,
sans le consentement préalable de .
se réserve le droit d'apporter toutes modifications et améliorations esthétiques, fonctionnelles ou
de design, sans préavis, à chacun de ses produits. décline toute responsabilité sur l'utilisation ou
sur l'application des produits ou des circuits décrits.
D.T.S
D.T.S.
D.T.S.
Las informaciones contenidas en este documento han sido cuidadosamenteredactadas y
controladas. Con todo, no se asume ninguna responsabilidad por eventuales inexactitudes.
Todos los derechos han sido reservados y este documento no puede ser copiado, fotocopiado
o reproducido, total o parcialmente, sin previa autorizaciónescrita de
se reserva el derecho a aportar sin previo aviso cambios y modificaciones de carácter
estético, funcional o de diseño a cada producto suyo. no se asume responsabilidad de
ningún tipo sobre la utilización o sobre la aplicació
n de los productos o de los circuitos descritos.
D.T.S.
D.T.S.
D.T.S.
ARC 1200
XR300 BEAM
2
ARC 1200
INDEX:
1- SYMBOLS 4
2- GENERAL WARNING 4
3- GENERAL WARRANTY CONDITION 4
4- TECHNICAL FEATURES 5
5- ACCESSORIES 7
6- IMPORTANT SAFETY INFORMATION 8
6.1 Fire prevention
6.2 Prevention of electric shock
6.3 Protection against ultraviolet radiation
6.4 Safety
6.5 Level of protection against the penetration of solid and liquid objects
7- MOUNTING THE LAMP 9
7.1 Lamp alignment
8- VOLTAGE AND FREQUENCY 10
9- INSTALLATION 10
9.1 Safety cable
9.2 Protection against liquids
9.3 Movement
9.4 Risk of fire
9.5 Forced ventilation
9.6 Ambient temperature
10- MAINS CONNECTION 11
10.1 Protection
11- DMX SIGNAL CONNECTION 12
11.1 DMX Addresses
11.2 Selecting the DMX address
12- FIRMWARE UPDATING 13
13- DISPLAY FUNCTIONS 14
14- ERROR MESSAGES 21
15- HIDDEN MENU 23
16- PAN & TILT SPEED 25
17- FANS SPEED 25
18- OPENING THE PROJECTOR HOUSING 26
19- REPLACING GOBOS 27
20- PERIODIC CLEANING 27
20.1 Lenses and reflectors
20.2 Fans and air passages
21- PERIODIC CONTROLS
22- DMX PROTOCOL 28
23- 8 MOTORS CONTROL CARD 52
24- PAN & TILT CARD 53
25- CABLES RESEND CARD
26- DISPLAY CARD
27- LAMP ON-OFF CONTROL CARD
28- ROTATING GOBO WHEEL 54
29- COLOUR WHEEL 55
30- GOBOS PROVIDED IN THE BOX AS STANDARD ACCESSORIES 57
3XR300 BEAM
ARC 1200
1- SYMBOLS
Graphic symbols used on this manual
2- GENERAL WARNING
Read the instruction contained in this user manual carefully, as they give important information
regarding safety during installation , use and maintenance.
The device is not for domestic use and must be installed by a qualified electrician or experienced
person.
Always disconnect the device from the mains before replacing the lamp.
The lamp must be replaced if it has been damaged or deformed by prolonged use or overheating.
The device must always be equipped with an efficient ground connection.
3- GENERAL WARRANTY CONDITIONS
The unit is guaranteed for 24 months from the date of purchase against manufacturing material defects.
THIS SYMBOL INDICATES A HOT SURFACE
THIS SYMBOL INDICATES ELECTRIC SHOCK RISK
THIS SYMBOL INDICATES GENERAL RISK
THIS SYMBOL MEANS “DO NOT PLACE THE UNIT ON
INFLAMMABLE SURFACES”
2M THIS SYMBOL INDICATES THE MINIMUM DISTANCE TO
BE KEPT BETWEEN THE DEVICE AND THE LIT OBJECT
4
F
THIS SYMBOL MEANS “RADIATION FROM THIS LAMP
CAN CAUSE DAMAGE TO EYES AND SKIN”
!
UV
XR300 BEAM
ARC 1200
4- TECHNICAL FEATURES
The XR300 BEAM is a new compact moving head with an extremely high light power, projecting a
parallel and very concentrated beam.
With its new optical unit, the XR300 BEAM generates 135.000 Lux at 5 metres, using only a 300 W
lamp, giving an exceptional balance between performance and power consumption.
The XR300 BEAM is designed for a wide range of professional applications, like concerts, shows, tours,
television, theatre, and big events. XR300 BEAM ensures in fact great flexibility in use, because in a
single projector it incorporates a range of functions normally available only on different units (long-throw
projectors with high-power lamps, PAR 64 ACL, moving heads).
The XR300 BEAM features a breakthrough in moving-head technology, dubbed Free Axis Rotation
("FAR"). The FAR system allows limitless pan and tilt rotation: the XR300 BEAM head rotates freely on
its axes, horizontally or vertically, without interruption, in either direction, never having to reverse motion.
The XR300 BEAM's ability to quickly and precisely select any point within its limitless sphere of
movement means faster looks and scene changes.
The XR300 BEAM also offers unmatched creative control to the lighting designer. Unique geometrical
designs, shapes, and scenes, unobtainable with conventional moving heads, are now possible for
application in concerts, theatres, studios, etc.
The FAR system is guaranteed and has been thoroughly tested.
The XR300 BEAM offers:
* Exceptional light power (135.000 Lux at 5 metres);
* The capacity to project a highly condensed and intense beam of light even over great distances, thanks
to the high efficiency of the new optical group;
* Variety of colours (CMY synthesis + 7-colour wheel + CTO);
* Customizable gobo wheel (7 rotating gobos);
* Insertable frost filter (soft edge);
* Unlimited Pan and Tilt movements (new FAR technology).
The XR300 BEAM is also the ideal light for a vast range of applications in which quiet operation is a
priority, thanks to its silent ventilation system and silent pan/tilt operation.
Access to every feature of the internal menu is simple and direct, thanks to the new user interface
featuring a LCD backlit graphic display (128 x 64).
XR300 BEAM FAR E.B.
(Cod. 03.MB002.EB.LF)
• FAR system • CMY • Electronic ballast
XR300 BEAM FAR
(Cod. 03.MB002.LF)
• FAR system • CMY • Electromagnetic ballast
XR300 BEAM E.B.
(Cod. 03.MB002.EB.L)
• CMY • Electronic ballast
XR300 BEAM BF
(Cod. 03.MB003.L)
• Electromagnetic ballast
Lamp
Optical group
135.000 Lux at 5 m (6° beam angle)
Fresnel lens (Ø 195 mm)
Dichroic glass reflector
Dimmer / shutter / strobo
Linear dimmer
Shutter
Strobe from 0,85 flash/sec to 10 flash/sec
Philips MSD Gold 300/2 Mini FastFit (300W / 22.000 Lumens)
Automatic switching on of lamp in case of accidental switching off
Lamp on/off via DMX; reset via DMX
5XR300 BEAM
4- TECHNICAL FEATURES
4 -eight digit- LED display with 4 buttons.
Electromagnetic ballast: 230 V (50/60 Hz);
1 x (cod. 05 028)
•1 x POWERCONN male cable connector (cod. 0520P014)
•1 x XLR 5 Pins male cable connector (cod. 0508B028)
•1 x XLR 5 Pins female cable connector (cod. 0508B027)
•5 x Metal Gobos
Colours
CMY colour synthesis system (XR300 BEAM FAR E.B. / XR300 BEAM FAR / XR300 BEAM E.B.)+
colour wheel (7 colours + CTO) with linear selection for perfect 2-colour beams
Colour change with blackout sync; rainbow effect
Gobos
1 customizable rotating gobo wheel (7 gobos); extractable gobo holders
Gobo change with synchronized blackout
Gobo scrolling; Gobo shake
Frost
Linear frost filter (soft edge)
Pan / Tilt
Unlimited Pan rotation; unlimited Tilt rotation (XR300 BEAM FAR E.B. / XR300 BEAM FAR)
Pan 540° (3,9 sec.), Tilt 270° (2,6 sec.) (XR300 BEAM E.B. / XR300 BEAM BF)
16-bit resolution
8 selectable speed ranges; extremely smooth and precise movements even at the highest speeds
Pan / Tilt locking system with recessed buttons
Automatic Pan/Tilt repositioning in case of knocks
DMX / Network
23 DMX channels (XR300 BEAM FAR E.B. / XR300 BEAM FAR / XR300 BEAM E.B.)
16 DMX channels (XR300 BEAM BF)
Internal operating system updatable via DMX
Interface
LCD (128x64) backlit graphic display (XR300 BEAM FAR E.B. / XR300 BEAM FAR / XR300 BEAM E.B.)
(XR300 BEAM BF)
Connections
4 XLR connectors (3-pole In and Out; 5-pole In and Out) by Neutrik; POWERCONN connector by
Neutrik
Power supply
Electronic ballast; 90-260 V (50/60 Hz); power consumption: 400 W
(XR300 BEAM FAR E.B. / XR300 BEAM E.B.)
power consumption: 400 W
(XR300 BEAM FAR / XR300 BEAM BF)
Power saving mode (the lamp dims to 50% six seconds after shutter closure)
(XR300 BEAM FAR E.B. / XR300 BEAM E.B.)
Standard accessories
2 x “C” GQuick clamps with “fastlock” connection
Thermal Operating ambient temperature: -10° / 40°
Dimensions (WxDxH) 485x450x637 mm
Weight
25 Kg XR300 BEAM FAR E.B. / XR300 BEAM E.B.
31 Kg XR300 BEAM BF
34Kg XR300 BEAM FAR
Approved lamps
Model Watt Base K° Lumens Life(h)
Osram Lok-it 300W 300 PGJX28 8.000 24.000 2.000
300 PGJX28 8.400 22.000 2.000
Philips MSD Gold 300/2 Mini FastFit Lamp 05S
Philips MSD Gold 300/2 Mini FastFit
ARC 1200
6XR300 BEAM
4- TECHNICAL FEATURES
5- ACCESSORIES
As standard
•1 x (cod. 05 028)
•1 x POWERCONN male cable connector (cod. 0520P014)
•1 x XLR 5 Pins male cable connector (cod. 0508B028)
•1 x XLR 5 Pins female cable connector (cod. 0508B027)
•5 x Metal Gobos
•2 x “C” Clamp GQUICK with “Fast Lock” connection 1/4 turn (max. load. 80Kg) (cod. 0521A014)
• User’s manual
Optional (on request)
Philips MSD Gold 300/2 Mini FastFit Lamp 05S
Flight cases
• Double Professional Flight case; compartment for lamps and accessories, swivel wheels, cover with
hinges with-stay, dishes on cover for piling, 8 handles (2 each
side) (cod. 0521C032)
Rain covers
• Rain cover for XR base (top) (cod. 03.MA001)
• Rain cover for XR base (bottom) (cod. 03.MA002)
Embedding flanges
• Embedding flange for XR (visible display) (cod. 03.MA005)
• Embedding flange for XR (no visible display) (cod. 03.MA006)
Wireless DMX receivers retrofits
• Wireless DMX Receiver Card with 0508A033 - INDOOR IP20 2-dBi antenna included
Clamps / safety wires
• “C” Clamp G60 black (max. load 50Kg) (cod. 0521A004)
• “C” Clamp G60 chrome (max. load. 50Kg) (cod. 0521A004.20)
• “C” Clamp GQUICK with “Fast Lock” connection 1/4 turn (max. load. 80Kg) (cod. 0521A014)
• “C” Clamp G100 black / professional (max. load. 200Kg) (cod. 0521A015)
• Omega clamp with “Fast Lock” connection 1⁄4 turn 1 couple (2 pieces) (Cod. 02K00467)
• Safety wire (3mm x 60 cm), ring spring catch, max. capacity load 60Kg (cod. 0521A010)
Unit Dimensions (LxWxH)
485x450x637mm
Weight:
25 Kg XR300 BEAM FAR E.B. / XR300 BEAM E.B.
31 Kg XR300 BEAM BF
34Kg XR300 BEAM FAR
Packaging Dimensions (LxWxH)
550
Weight:
x 440 x 800 mm
32 Kg XR300 BEAM FAR E.B. / XR300 BEAM E.B.
38 Kg XR300 BEAM BF
41Kg XR300 BEAM FAR
ARC 1200
7XR300 BEAM
Dimensions
6- IMPORTANT SAFETY INFORMATION
6.1 Fire prevention:
lamp
The use of any other alternative lamp is not recommended and will null and void the fixture's warranty.
-Never locate the fixture on any flammable surface.
-Minimum distance from flammable materials: 1.5 MT.
-Minimum distance from the closest illuminable surface: 2 MT.
-Replace any blown or damaged fuses only with those of identical value. Refer to the wiring diagram if
there is any doubt.
-Connect the projector to mains power via a thermal magnetic circuit breaker.
6.2 Prevention of electric shock:
-High voltage is present inside the unit. Unplug the unit prior to performing any function which involves
touching the inside of the moving head, including lamp replacement.
-The level of technology inherent in the requires the assistance of specialised personnel for
all servicing. Please refer to an authorised DTS service centre.
-A good earth connection is essential for proper functioning of the projector.
-Never connect the unit without proper earth connection.
-The fixture should be located in places with a good air ventilation.
6.3 Protection against ultraviolet radiation:
-Never turn on the lamp if any of the lenses, filters or ABS covering are damaged. Their respective
shielding functions will only operate efficiently if they are in perfect working order.
-Never look directly the lamp when it is on.
6.4 Safety:
-The projector should always be installed with bolts, clamps and other tools that are capable of
supporting the weight of the unit.
-Always use a second safety cable to sustain the weight of the unit in case of the failure of the main
fixing point.
-The external surface of the unit, at various points, may exceed 70°C. Never handle the unit until at
least 10 minutes have elapsed since the lamp was turned off.
-Always replace the lamp if any physical damage is evident.
-Never install the fixture in an enclosed area lacking sufficient air flow. The ambient temperature should
not exceed 40°C.
-A hot lamp may explode, so always wait for at least 10 minutes prior to attempting to replace the lamp.
-Always wear suitable hand protection when handling the lamp.
6.5 Level of protection against the penetration of solid and liquid objects:
-The projector is classified as an ordinary appliance and its protection level against the penetration of
solid and liquid objects is IP 20.
For outdoor use, D.T.S. reccomend the use of the dedicated raincovers:
XR300 BEAM uses a
Osram Lok-it 300W
XR300 BEAM
• Rain cover for XR base (top) (cod. 03.MA001)
• Rain cover for XR base (bottom) (cod. 03.MA002)
Philips MSD Gold 300/2 Mini FastFit
(Alternative approved lamp: )
ARC 1200
2M
8
F
!
!
UV
XR300 BEAM
7- MOUNTING THE LAMPS
Warning: Switch off the unit before replacing the lamp.
1) Using a screwdriver, loose the 3 screws A, B, C, (photo 1) and remove the metal cover .
2) Insert the lamp (photo2).
3) Rotate the lamp 1/4 turn clockwise (photo 3 and 4).
The lamp used on XR300 BEAM is made in quartz glass and should be handled with care. Always follow
the instructions supplied in the lamp's packaging. Never touch the glass directly but use the tissue
provided in the lamp's packaging. The lamp socket is symmetrical.
DO NOT USE UNDUE FORCE ON THE GLASS. In case of difficulty, read again the instructions and repeat
the procedure.
4) Replace the metal cover and tighten the screws A,B,C, which were previously removed.
WARNING: Never look directly at the lamp when it’s lit.
Discharge lamps emits UV rays; radiation from this lamp can cause damage to eyes and skin.
7.1 Lamp alignment
Attention: we recommend to align the lamp in the optical system to avoid overheating of the dichroic
filters and other components inside the unit. The lamp alignment is also essential to obtain the
maximum uniformity and luminous performance by the projection.
3 adjusters X, Y and
Z (photo 5)
you will have an evenly projected light beam, with no shadows or
zones wich are brighter than others.
Philips MSD Gold 300/2 Mini FastFit
Power 300W
Luminous flux 22,000 lm
Colour temperature 8.400°K
Lampbase PGJX28
Rated life 2000 hours
GJX28
1) Mount the fixture in an orientation so that it may be squarely projected onto a smooth white surface
no less than 3 meters away. 2) Using a console or the menu system, focus an open (white) beam onto
the surface and observe the beam. 3) Using a phillips-head screw driver, rotate the
until you achieve a uniform flat field.
When the lamp is correctly optimized,
ARC 1200
Photo 2Photo 1 Photo 4Photo 3
Photo 5
9
Lamp
Alignment
UV
XR300 BEAM
Osram Lok-it 300W
Power 300W
Luminous flux 24,000 lm
Colour temperature 8.000°K
Lampbase PGJX28
Rated life 2000 hours
8- VOLTAGE AND FREQUENCY
The XR300 BEAM with electronic ballast can operate at 90-260 VOLT 50 or 60 Hz.
The XR300 BEAM with Electromagnetic ballast can operate at 230 VOLT 50 or 60 Hz.
9- INSTALLATION
XR300 BEAM may be either floor or ceiling mounted.
For floor mounting installations, the XR300 BEAM is supplied with four rubber mounting feet on the
base.
For ceiling mounted installations, we reccomend the use of appropriate clamps to fix the unit to the
mounting surface.
The supporting structure from which the unit is hung should be capable of bearing the weight of the
unit, as should any clamps used to hung it. The structure should also be sufficiently rigid so as not to
move or shake whilst the XR300 BEAM is moving.
Eight 1/4 turn Fast Locks connections placed in the base of the units allow to fix the XR300 BEAM in any
position, by using the two Fast Lock ‘C’ clamps provided in the box.
.
9.1- Safety cable
We recommend the use of a safety cable or chain connected to the XR300 BEAM and to the suspension
truss in order to avoid the fixture accidentally falling should the main fixing point fail. Make sure that the
iron cable or chain can bear the weight of the entire unit.
You may attach the safety chain to the two holes (A) located on the base of the fixture, as shown in the
picture below.
9.2- Protection against liquids
The projector contains electric and electronic components which should under no circumstances come
into contact with oil, water or any other liquid. The proper unit functioning would be compromised
should this occur.
ARC 1200
10 XR300 BEAM
A