Dual Electronics Corporation BTM100 Datasheet

BTM100
INSTALLATION/QUICK
START
GUIDE
Wireless
Bluetooth
Module
I
Bluetooth®
Caution:
Any
changes
or
modifications
in
construction
of
this
device
which
are
not
expressly
approved
by
the
party
responsible
for
compliance
could
void
the
user's
authority
to
operate
the
equipment.
Note
:
This
equipment
has
been
tested
and
found
to
comply
with
the
limits
for
a
Class
A
digital
device.
pursuant
to
part
15
of
the
FCC
Rules.
These
limits
are
designed
to
provide
reasonable
protection
against
harmful
interference
when
the
equipment
is
operated
in
a
commercial
environment.
This
equipment
generates.
uses.
and
can
radiate
radio
frequency
energy
and.
if
not
installed
and
used
in
accordance
with
the
instruction
manual.
may
cause
harmful
interference
to
radio
communications.
Operation
of
this
equipment
in
a
residential
area
is
likely
to
cause
harmful
interference
in
which
case
the
user
will
be
required
to
correct
the
interference
at
his
own
expense.

BTM1 00 INSTALLATION
Typical Installation
STEP 1
STEP 3
PRESS
Installation Quick Reference
• Insert the mounting clip into the guide holes. and attach to the BTM 1 00 module
as seen in the picture above.
• Mount the
BTM 1 00 onto the visor using the using the mounting clip. ensuring the
microphone is facing the driver. Refer to the picture below
for reference.
• Carefully route the connection cable down the
A-pillar of the vehicle. then to the
back of
your Dual Bluetooth® ready head unit.
• Plug the
BTM1 00 connector into the back of the head unit making sure to line up
the
arrows before connecting. Refer to the head unit owner·s manual for more
information.
BTM100
Compatible Head Units:
AXV3D, DXV3D
TALK Button
A-Pillar
2

BTM 1 00 OPERATION
Quick Start Guide
Note: You must first pairand connect your Bluetooth®mobile device tothe BTM100
to place and receive calls. Refer to your head unit owner's manual for pairing and
detailed operation instructions.
Receiving a Call
• When the BTM 1 00 detects an incoming call, your head unit will automatically
switch to Bluetooth mode, and display the caller
ID phone number.
•
To receive an incoming call, press~ on the BTM1 00 or your head unit when the
phone is ringing.
• During a phone call,
press~ to activate the call waiting feature. Press~ once
more to return to the original call.
• Operation can
be varied by the head units connected to BTM1 00, so please refer
to Owner's Manual ofyour head unit connected to
BTM 1 00 for the details
of operation.
Placing a Call
• To make a call using the head unit first press~ or MODE to change to
Bluetooth standby mode.
• While in Bluetooth standby mode. press
~ to enterthe dialing screen.
• From the dialing screen, enterthe phone
number using 0-9, *,#on the front
panel of the head unit.
•
Once the number is entered, press~ to place the call.
Note:
•
Due to the differences in Bluetooth technology, some mobile devices may
be incompatible or function improperlywhen used with the BTM1 00.
• BTM 1 00 enables users to display or select phone book to make a call
and listen to music streaming stored in the phone via PBAP(Phone book
access profile) and A2DP(Advanced audio distribution profile).
3

BTM1
00
WARRANTY
Limited
One
Year
Warranty
This
warranty
gives
you
specific
legal
rights.
You
may
What
to
do?
also
have
other
rights
which
vary
from
state
to
state.
1.
Before
you
call
for
service.
check
the
Dual
Electronics
Corp.
warrants
this
product
to
the
original
purchaser
to
be
free
from
defects
in
material
and
workmanship
for
a
period
of
one
year
from
the
date
of
the
original
purchase.
Dual
Electronics
Corp.
agrees.
at
our
option.
during
the
warranty
period.
to
repair
any
defect
in
material
or
workmanship
or
to
furnish
an
equal
new.
renewed
or
comparable
product
(whichever
is
deemed
necessary)
in
exchange
without
charges.
subject
to
verification
of
the
defect
or
malfunction
and
proof
of
the
date
of
purchase.
Subsequent
replacement
products
are
warranted
for
the
balance
of
the
original
warranty
period.
Who
is
covered?
This
warranty
is
extended
to
the
original
retail
purchaser
for
products
purchased
and
used
in
the
U.S.A.
What
is
covered?
This
warranty
covers
all
defects
in
material
and
workmanship
in
this
product.
The
following
are
not
covered:
installation/removal
costs.
damage
resulting
from
accident.
misuse.
abuse.
neglect.
product
modification.
improper
installation.
incorrect
line
voltage.
unauthorized
repair
or
failure
to
follow
instructions
supplied
with
the
product.
or
damage
occurring
dlring
return
shipment
of
the
product.
troubleshooting
guide
in
your
owner's
manual.
A
slight
adjustment
of
any
custom
controls
may
save
you
a
service
call.
2.
If
you
require
service
during
the
warranty
period.
you
must
carefully
pack
the
product
(preferably
in
the
original
package)
and
ship
it
by
prepaid
transportation
with
a
copy
of
the
original
receipt
from
the
retailer
to
an
authorized
service
center.
3.
Please
describe
your
problem
in
writing
and
include
your
name.
a
return
UPS
shipping
address
(P.O.
Box
not
acceptable).
and
a
daytime
phone
number
with
your
shipment.
4.
For
more
information
and
for
the
location
of
the
nearest
authorized
service
center
please
contact
us
by
one
of
the
following
methods:
•
Call
us
toll-free
at
1-866-382-5476
•
E-mail
us
at
[email protected]
Exclusion
of
Certain
Damages:
This
warranty
is
exclusive
and
in
lieu
of
any
and
all
other
warranties.
expressed
or
implied.
including
without
limitation
the
implied
warranties
of
merchantability
and
fitness
for
a
particular
purpose
and
any
obligation.
liability.
right.
claim
or
remedy
in
contract
or
tort.
whether
or
not
arising
from
the
company's
negligence.
actual
or
imputed.
No
person
or
representative
is
authorized
to
assume
for
the
company
any
other
liability
in
connection
with
the
sale
of
this
product.
In
no
event
shall
the
company
be
liable
for
indirect.
incidental
or
consequential
damages.
Dual
Electronics
Corp.
Toll
Free: 1-866-382-5476
www.dualav.com
©2013 Dual Electronics Corp.
All
rights reserved.
The Bluetooth®
word
mark
and logos are owned by the Bluetooth
SIG.
Inc. and any use of such
marks
by Movon is under
license. Other trademarks and trade names are those of
their
respective owners.
NSA0207-
VOl