Ducati Streetfighter User manual

cod 913.7.182.1A

1
E
Owner’s manual

2
E

3
E
We would like to welcome you among Ducati enthusiasts,
and congratulate you on your excellent choice of motorcycle.
We think you will ride your Ducati motorcycle for long
journeys as well as short daily trips. Ducati Motor Holding
S.p.A. wishes you smooth and enjoyable riding.
We are continuously working to improve our Technical
Assistance service. For this reason, we recommend that you
strictly follow the instructions in this manual, especially
those regarding the running-in period. In this way, you can be
sure your Ducati motorcycle will continue to be a pleasure to
ride.
For any servicing or suggestions you might need, please
contact our authorised service centres.
We also provide an information service for all Ducati owners
and enthusiasts for any advice and suggestions you might
need.
Enjoy your ride!
Note
Ducati Motor Holding S.p.A. cannot accept any liability
for errors that may have occurred in the preparation of this
manual. All information in this manual is valid at the time of
going to print. Ducati Motor Holding S.p.A. reserves the right
to make any modifications required due to the ongoing
development of their products.
For your safety, as well as to preserve the warranty, reliability
and worth of your motorcycle, use original Ducati spare parts
only.
Warning
This manual forms an integral part of the motorcycle
and - if the motorcycle is resold - must always be handed
over to the new owner.

4
ETable of contents
General 7
Warranty 7
Symbols 8
Useful information for safe riding 8
Carrying the maximum load allowed 9
Identification data 10
Dashboard 11
Dashboard 11
LCD unit functions 13
LCD - Parameter setting/display 15
Total distance covered indicator: “Odometer“ 18
Vehicle speed indication 19
Engine coolant temperature indicator 20
“TRIP” meter 21
Distance travelled on fuel reserve: “TRIP FUEL“ 22
Clock display indicator 23
Air temperature indicator 24
Maintenance indicator 25
Battery voltage indicator (BAT) 26
Engine idle RPM setting (RPM) 27
Backlighting setting (LIGHT SET) 28
LAP time display function 29
Stored data display (LAP Memory) 31
DDA data logger 32
Erase DDA 33
Function for activation/deactivation of DTC
(Ducati Traction Control) 34
Activation of the system 35
DTC (Ducati Traction Control) setting function 36
Tips on how to select the sensitivity level 38
Tips for use on the track 39
Tips for use on the road 39
Quick Shift (DQS ON/OFF) enable / disable function 40
Clock setting function 41
Dashboard diagnosis 42
Turn indicators automatic “RESET” function 47
Headlight “gradual” SWITCH-ON 47
Headlight “smart” auto-off 47
The immobilizer system 48
Keys 48
Code card 49
Immobilizer override procedure 50
Operation 52
Duplicate keys 52
Service menu - unit of measurement (UNIT SET) 53
Controls 55
Position of motorcycle controls 55
Key-operated ignition switch and steering lock 56

5
E
Lh switch 57
Clutch lever 58
RH switch 59
Throttle twistgrip 59
Front brake lever 60
Rear brake pedal 61
Gear change pedal 61
Setting the gear change and rear brake pedals 62
Main components and devices 64
Position on the vehicle 64
Fuel tank plug 65
Seat latch 66
Side stand 67
Front fork adjusters 68
Rear shock absorber adjusters 70
Directions for use 72
Running-in recommendations 72
Pre-ride checks 74
Starting the engine 75
Moving off 77
Braking 77
Stopping the motorcycle 78
Parking 78
Refuelling 80
Tool kit and accessories 81
USB Data Logger 82
Main maintenance operations 83
Changing the air filter 83
Checking and topping up coolant level 83
Checking brake and clutch fluid level 84
Checking brake pads for wear 86
Lubricating cables and joints 87
Adjusting throttle control free play 88
Charging the battery 89
Checking drive chain tension 90
Chain lubrication 91
Replacing the high and low beam bulbs 92
Rear turn indicators 93
Number plate light 93
Beam setting 94
Tubeless tyres 96
Checking engine oil level 98
Cleaning and replacing the spark plugs 99
General cleaning 100
Storing the bike away 101
Important notes 101
Maintenance 102
Programmed maintenance plan: operations to be carried out
by the dealer 102
Programmed maintenance plan: operations to be carried out
by the customer 105
Technical data 106
Overall dimensions (mm) 106

6
EWeights 106
Engine 108
Timing system 108
Performance data 109
Spark plugs 109
Fuel system 109
Brakes 110
Transmission 111
Frame 112
Wheels 112
Tyres 112
Suspensions 112
Exhaust system 113
Colour schemes 113
Electric system 113
Scheduled maintenance reminder 118
For United States of America
version Only 119
Reporting of safety defects 119
Safety warnings 119
Noise emission warranty 119
Noise and exhaust emission control system information 119
Tampering warning 120
Riding safety 121
Protective apparel 122
Vehicle identification number (VIN); 122
Label location 123
California emission control warranty statement
Your warranty rights and obligations 125
Manufacturer’s warranty coverage 125
Owner's warranty responsibilities: 125
California evaporation emission system 126
Ducati limited warranty on emission control system 126
Routine maintenance record 129

7
E
General
Warranty
In your own interest, and in order to guarantee product
reliability, you are strongly advised to refer to our authorised
Dealers and Service Centers for any servicing requiring
particular technical expertise.
Our highly skilled staff have access to the implements
required to perform any servicing job at best, and use Ducati
original spare parts only as the best guarantee for full
interchangeability, smooth running and long life.
All Ducati motorcycles come with a “Warranty Card”.
However, warranty does not apply to the motorcycles used
in competitions or competitive trials or whenever poor
maintenance status is ascertained. No motorcycle part may
be tampered with, altered, or replaced with parts other than
original Ducati spare parts during the warranty period, or the
warranty right will be automatically invalidated.
Warning
The vehicle is only compatible with fuel having a
maximum content of ethanol of 10% (E10). Using fuel with
ethanol content over 10% is forbidden. Using them could
result in severe damage of the engine and motorcycle
components. Using fuel with ethanol content over 10% will
make the warranty null and void.

8
ESymbols
Ducati Motor Holding S.p.A. advises you to read this manual
carefully in order to become familiar with your motorcycle. In
case of any doubts, please call a Dealer or authorised Service
Center. The information contained herein will prove useful on
your trips - and Ducati Motor Holding S.p.A. wishes you
smooth, enjoyable riding - and will help you keep the
performance of your motorcycle unchanged for a long time.
This manual contains some special remarks:
Warning
Failure to comply with these instructions may put you
at risk and lead to severe injury or death.
Important
Possibility of damaging the motorcycle and/or its
components.
Note
Additional information concerning the job being carried
out.
The terms RIGHT and LEFT are referred to the motorcycle
viewed from the riding position.
Useful information for safe riding
Warning
Read this section before riding your motorcycle.
Accidents are frequently due to inexperience. Always make
sure you have your licence with you when riding; you need a
valid licence to be entitled to ride your motorcycle.
Do not lend your motorcycle to inexperienced riders or who
do not hold a valid licence.
Both rider and pillion passenger must ALWAYS wear a safety
helmet.
Wear proper clothing, with no loose items or accessories
that may become tangled in the controls or limit your zone of
vision.
Never start or run the engine indoors. Exhaust gases are
poisonous and may lead to loss of consciousness or even
death within a short time.
Both rider and pillion passenger should keep their feet on the
footpegs when the motorcycle is in motion.
ALWAYS hold the handlebars firmly with both hands so you
will be ready for sudden changes of direction or in the road
surface. The pillion passenger should ALWAYS hold on to the
strap onto passenger seat with both hands.
Ride within the law and observe national and local rules.
ALWAYS respect speed limits where these are posted.
However, ALWAYS adjust your speed to the visibility, road
and traffic conditions you are riding in.
ALWAYS signal your intention to turn or pull to the next lane
in good time using the suitable turn indicators.

9
E
Be sure you are clearly visible and do not ride within the blind
spot of vehicles ahead.
Be very careful when tackling road junctions, or when riding
in the areas near exits from private grounds, car parks or on
slip roads to access motorways.
ALWAYS turn off the engine when refuelling.
Be extremely careful not to spill fuel on the engine or on the
exhaust pipe when refuelling.
Do not smoke when refuelling.
While refuelling, you may inhale noxious fuel vapours.
Should any fuel drops be spilled on your skin or clothing,
immediately wash with soap and water and change your
clothing.
ALWAYS remove the key when you leave your motorcycle
unattended.
The engine, exhaust pipes, and silencers stay hot for a long
time.
Warning
The exhaust system might be hot, even after engine is
switched off; pay particular attention not to touch exhaust
system with any body part and do not park the vehicle next
to inflammable material (wood, leaves etc.).
Park your motorcycle where no one is likely to hit it and use
the side stand.
Never park on uneven or soft ground or your motorcycle may
fall over.
Carrying the maximum load allowed
Your motorcycle is designed for long-distance riding, carrying
the maximum load allowed in full safety.
Even weight distribution is critical to preserving these safety
features and avoiding trouble when performing sudden
manoeuvres or riding on bumpy roads.
Information about carrying capacity
The total weight of the motorcycle in running order
including rider, passenger, luggage and additional
accessories should not exceed:
390 kg.
Arrange your luggage or heavy accessories in the lowest
possible position and close to motorcycle centre.
Be sure to secure the luggage to the supports provided on
the motorcycle as firmly as possible. Improperly secured
luggage may affect stability.
Never fix bulky or heavy objects to the handlebar or to the
front mudguard as this would affect stability and cause
danger.
Do not insert any objects you may need to carry into the gaps
of the frame as these may foul moving parts.
Make sure the tyres are inflated to the proper pressure
indicated on page 96 and that they are in good condition.

10
EIdentification data
All Ducati motorcycles have two identification numbers, for
frame (fig. 1) and engine (fig. 2).
Note
These numbers identify the motorcycle model and
should always be indicated when ordering spare parts.
Frame number
Engine number
fig. 2
fig. 1

11
E
Dashboard
Dashboard
1) LCD, (see page 13).
2) REVOLUTION COUNTER (rpm).
Indicates engine revs per minute.
3) NEUTRAL LIGHT N (GREEN).
Illuminates when the gearbox is in neutral.
4) FUEL WARNING LIGHT (AMBER YELLOW).
Comes on when fuel is low and there are about 2 litres of fuel
left in the tank.
5) TURN INDICATOR LIGHTS (GREEN).
Comes on flashing when the turn indicators are on.
6) ENGINE OIL PRESSURE LIGHT (RED).
Illuminates when engine oil pressure is too low. It briefly
comes on when the ignition is switched to ON and normally
goes out a few seconds after engine starts.
It may come on briefly if the engine is very hot, but should go
out again as engine speed increases.
Important
If this light (6) stays on, stop the engine to avoid
serious damage.
7) HIGH BEAM LIGHT (BLUE).
Illuminates when the high beam headlight is on.
8) “VEHICLE/ENGINE DIAGNOSIS- EOBD” LIGHT
(AMBER YELLOW).
When on, this light is used by the control unit to signal the
presence of “Engine“ and/or “Vehicle“ errors and
sometimes the consequent engine disabling.
1
2
5 3 8 4 7 6
fig. 3

12
E9) REV LIMITER LIGHT - OVER REV (RED)
Light 9B + 9C: These lights come on steady at 400 rpm
below the limiter threshold.
Light 9A + 9B + 9C: These lights come on steady at 800 rpm
below the limiter threshold.
Light 9A + 9B + 9C: They start flashing when the rev limiter
is reached.
10) TRACTION CONTROL LIGHT (RED) (fig. 4)
Light 10B + 10C: With DTC active, these lights turn on when
driving torque is slightly reduced by the system.
Light 10A + 10B + 10C: With DTC active, these lights turn on
when driving torque is considerably reduced by the system.
11) CONTROL SWITCH (fig. 5)
Button used to display and set dashboard parameters “▲“.
12) CONTROL SWITCH (fig. 5)
Button used to display and set dashboard parameters “▼“.
13) HIGH-BEAM FLASH BUTTON FLASH (fig. 5)
The high-beam flash button may also be used to control the
LAP functions and the dashboard DDA data logger.
14) TURN INDICATORS OFF BUTTON (fig. 5)
The turn indicators off button may also be used to RESET/
CONFIRM function selections on the dashboard.
10B 10A 10C
9B 9A 9C
fig. 4
11
13
12
14
fig. 5

13
E
LCD unit functions
Warning
Any adjustments to the dashboard must only be
carried out when the motorcycle is stationary. Never operate
the dashboard controls while riding the motorcycle.
1) SPEEDOMETER.
Gives road speed.
2) ODOMETER.
Shows total distance travelled.
3) TRIP METER.
Indicates the distance travelled since last reset (TRIP).
4) TRIP FUEL METER.
Shows distance travelled on reserve fuel.
5) CLOCK.
6) LAP TIMER.
7) ENGINE RPM INDICATOR (RPM).
8) LAP TIMER, MAX. RPM (LAP) AND LIMITER STATE (IF
REACHED).
9) BATTERY VOLTAGE INDICATOR (BATT).
10) AIR TEMPERATURE INDICATOR.
11) WATER TEMPERATURE INDICATOR.
Indicates engine coolant temperature.
Important
Stop riding if the temperature reaches the maximum
value, otherwise the engine might be damaged.
5 8 2 3 4 5 1
7 10 9 11
fig. 6

14
E12) MAINTENANCE COUNTER INDICATOR.
This indicator comes on to indicate that the vehicle is due for
service.
It stays on until it is RESET at a Ducati Dealer or authorised
Service Centre as part of the service procedure.
13) LAP FUNCTION.
Indicates that the LAP function has been activated.
14) DDA FUNCTION.
Indicates activation of the DDA function.
15) TRACTION CONTROL (DTC).
Indicates activation of the DTC system control unit.
16) DQS FUNCTION.
Indicates that the DQS function has been activated.
Important
The dashboard incorporates diagnostic functions for
the electronic injection/ignition system. If you accidentally
access a restricted menu, do not under any circumstances
attempt to use it, but turn the ignition key to OFF. Contact a
Ducati Dealer or authorised Service Centre for the necessary
inspections.
14 13 15 16 12
fig. 7

15
E
LCD - Parameter setting/display
When the key is turned from OFF to ON, the dashboard turns
on all LCD digits for one second and all warning lights one by
one.
OFF
CHECK 1
fig. 8

16
EIt then switches to “normal“ display mode showing the
model indication in place of the odometer and, for 2 seconds,
even the version (EU, UK, USA, CND, FRA, JAP) in place of
the road speed readout.
Model is displayed once as scrolling text.
CHECK 2
RUN
fig. 9

17
E
Upon Key-On, the dashboard always displays the following
information (and any functions activated previously are
deactivated, apart from the Traction Control, when active):
ODOMETER
SPEED
RPM BARGRAPH
ENGINE COOLANT TEMPERATURE BARGRAPH
With the button (1, fig. 10) “▲”, the ODOMETER READOUT
(TOT) will cycle through the following functions:
TRIP
TRIP FUEL (only if active)
CLOCK
T_AIR
DTC (available only if Traction Control is present and active)
to go back to the Odometer function (TOT).
Pressing button (2, fig. 10) “▼“ gives access to the MENU
and the following functions are displayed one after another:
ERROR (only if at least one error is present)
BATT
RPM
LIGHT SET
LAP (OFF or ON)
LAP MEM
DDA (OFF or ON)
ERASE DDA
DTC OFF/ON (active only if Traction Control is fitted)
DTC SETUP (active only if DTC has been activated)
DQS OFF/ON (it works only if the vehicle is equipped with
the electronic gearbox kit, Performance code 96524412A)
TIME SET
CODE (only if active)
Warning
To fit the electronic gearbox kit, Performance code
96524412A, contact a Ducati Dealer or Authorised Service
Centre
Important
This menu is active only if the speed of the motorcycle
is less than 20 km/h. If this menu is open and the speed of
the motorcycle exceeds 20 km/h, the dashboard
automatically exits the menu and returns to the initial display.
It is possible to exit the MENU at any time, however, by
pressing switch (2, fig. 10) “▼” for 3 seconds.
1
2
fig. 10

18
ETotal distance covered indicator:
“Odometer“
This function shows the total distance covered by the
vehicle.
At Key-On the system automatically enters this function.
The odometer reading is stored permanently and cannot be
reset.
If the distance travelled exceeds 99999 km (or 99999 miles),
the value “99999” will be displayed permanently.
fig. 11
vs. EU, CND, FRA, JAP
vs. UK, USA

19
E
Vehicle speed indication
This function shows vehicle speed.
Speed indication is obtained from actual speed information
(in km/h) from the ECU increased by 8%.
Maximum speed displayed is 299 km/h (186 mph).
Over 299 km/h (186 mph) the display will show a series of
dashes “- - -“ (steadily lit - not flashing).
fig. 12
vs. EU, CND, FRA, JAP
vs. UK, USA