Durabook ADK07 User manual

R11 Vehicle Dock
Product Overview
No.
Item
1
Latch
2
Mounting holes for VESA
mount
3
Alignment port (x2)
4
Docking connector
5
Latch bar (with key slot)
No.
Item
1
LAN (RJ-45) port
2
USB3.0 port (x2)
3
WWAN antenna port
4
USB2.0 port (x2)
5
HDMI port
6
GPS antenna port
7
Serial port (RS-232)
8
DC-in jack *
9
Kensington lock slot
*Please contact dealer for appropriate adapter.
Front
Rear
Unlock the Latch
The latch on the docking cradle is locked during
packaging. To unlock the latch, do the following:
1. Insert the latch bar key.
2. Turn it clockwise until a “click” is heard, indicating
the latch bar is released.
3. Remove the key from the key slot.

R11 Vehicle Dock
Docking the R11 Tablet PC
1. With screen side facing out and docking
connector down, insert the R11 tablet PC into
the alignment ports on docking cradle.
2. Secure the R11 tablet PC by pulling the latch
forward until a “click” is heard and the latch is
fully engaged.
3. Fully push the latch bar into position to ensure the latch is tightly secured.
NOTE: If the latch bar cannot be pushed, adjust the latch position and repeat step 3.
Undocking the R11 Tablet PC
1. Insert the latch bar key into the latch bar and
turn clockwise until a “click” is heard. Refer to
the “Unlock the Latch”section.
2. While supporting the R11 tablet PC with one
hand, push the latch backward until it fully
disengages.

R11 Vehicle Dock
3. Remove the R11 tablet PC from the docking cradle.
Using the Cable Clamp
1. Attach the cable clamp on the bottom of the cradle.
2. Route the cable(s) through the cable clamp as illustrated.
FCC Regulations
This device complies with Part 15B Class B of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interface, and (2) this device must accept any interface
received, including interface that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
©2019 Twinhead International Corp and/or its affiliates. All rights reserved.