Dutchbone ALIM SIDE TABLE User manual

SIDE TABLE ALIM SET OF 3
Assembly Instructions
Thank you for purchasing this table. Please read the instructions carefully before use to ensure safe
and satisfactory use of this product.
Pre assembly preparation
Please ensure instructions are read completely before assembling this product.
1 person needed
No tools required
Carefully check that you have all the parts before beginning to assemble the product.
components are listed on this leaflet.
Keep all equipments out of children’s reach and keep children away from construction area.
As you unpack and prepare for assembly, place the contents on a carpeted or padded area to
protect them from damage.
Parts
3x Table top
3x Short legs
3x Medium legs
3x Tall legs

Step by step assembly instructions
Step 1: Remove all the packaging. Place the tabletop on the flat surface.
Step 2: Take one large leg and align with a hole in the table top. Turn clockwise until it fits
securely. Do not over tighten. Do the same with the second and third leg.
Step 3: Repeat step 2 for the medium and small table.
Care and maintenance
A gentle wipe with a lint-free cleaning cloth is all that is required to maintain the finish. Do not
use any abrasive cleaning products or spray polishes on this table, as they will alter the finish of
the table.
All spillages must be wiped up immediately.
Protect surface from scratches and marks by using mats and/or coasters.
Accessories such as ornaments or lamps, which are placed upon the surface, need to be moved
regularly to avoid shading.
Furniture will endure most temperatures in the modern home. However, it should be positioned
as far away from radiators or other direct heat sources as possible.
The tables should not be used for sitting or standing on.
Never drag pieces across the floor as this could cause damage to the floor.
Periodically check all fixings and tighten if necessary.