DVS LCW-503 User manual

DVS
INSTRUCTION MANUAL
Digital Motion Detect Video Record System
This manual contains important information about this product's operation.
If you are installing this product for others, you must leave this manual -or a
copy-with the end user
PLEASE READ CAREFULLY AND SAVE
Color
RoHS
2002/95/EC

CONTENTS
Notice..................................................................................01
Function..................................................................................01
Using range...............................................................................01
Parts include in package...........................................................01
Technical Data............................................................................02
Unit Description of front Panel................................................03
SD Card using............................................................................03
Connecting the Device.............................................................04
Menu............................................................................................05
Manual capture Setup..................................................................06
Motion Detect Setup....................................................................07
Motion Detect Setup....................................................................08
Auto Capture Setup......................................................................09
Advanced Setting.........................................................................10
Advanced Setting.........................................................................11
Time/Date Setting..........................................................................12
Preview Mode...............................................................................13
Delete One Mode..........................................................................14
Delete All Mode.............................................................................15
Format Memory............................................................................16
Note before Use
Function Setup
Playback Operation
Notice 6.it is can be connect two cameras, and then
1.Please connect the parts of all demands have the function is Picture in picture, but just
first, then open power supply shoot the image of main camera
2.Please cut off power supply when you 7.Supply to all kind of CCD/CMOS camera
inserting or pulling out SD card to be avoiding 8.The stored photos/video clips will not lose
the equipments have damage. when power off
3.Please do not touch the metals part of the 9.Support video signal of NTSC/PAL
SD card directly by your hand. In order to 10.The setting of “motion detect sensing area,
prevent the SD card have damage sensitivity, interval” will not lose when power
permanence. off
4.Please use AC/DC power adaptor we offer 11.The shooting date is stored as file name,
5.Please far away from water or liquid, to the format of picture is JPEG, and the format
avoid short circuit of devise of video is AVI
6.In order to prevent the computer is frozen. 12.Can look for, and check images/video
When you use the equipment, Please don’t according to the shooting date
push multi- keystrokes at one time, or operate 13.Support playback the image on
abnormal and continually. TV/Monitor/Computer
Function Using Range
Digital Motion Detect Video Record System High performance, low cost, easy operating,
(DVS for short). It is new shoot and record can be connected all CCTV cameras, alarm
system of distinguish from high intelligent and systems and other devises as a combination to
digital motion picture. The basic function is use.
DVS=CCTV+DVR. When the motion object Suitable for monitoring home, office,
appears, the system can be take a picture or supermarket, warehouse, school, traffic tool,
shoot and record the picture by auto or Manu. police, Government and so on.
And then keep the picture into the inside
memorizer or SD. and that user can be view TV Parts include in package
(monitor) or computer (need install card reader) 1.DVS x1
anytime. User can be kept the picture into 2.DC12V adaptor x1
computer from SD card. 3.Video cable x2
1.Get into the state of "detecting moving 4.Din video cable x1
objects" once power on 5.User’s manual x1
2.Automatically take photos/record (record
images and sound simultaneously) once
detecting moving objects
3.Stop taking photos when the moving objects
stop moving
4.Support maximally 32G SD card which can
greatly enlarge the storage of images
5.Photos/Videos will overwrite when have no
space of hard disk
Note Before Use
01

Technical Data
①UP
②LEFT
③MENU/OK
④RIGHT
⑤DOWN
⑥SHOT
⑦MODE
⑧DISP
⑨ZOOM
①
②
③
④
⑤
⑥
⑦
⑧
⑨
02
DISP: Input signal swith, AV1,AV2,PIR;Use for wireless, as for channel switch function
SHOT: Shutter, playback, shop function
Zoom: 10x digital zoom, review function
Model
Power
Working Current
Working Temperature
Normal Capacity
Max. Capacity
Picture Form
Picture Element
Video Form
Frame Element
Frame Rate
Record Time
Compress Method
Record Signal
Video input
Video output
Dimension
Weight
LCW-503
DC12V
250mA
-10°C- +50°C
128Mb SD Card
32GB SD card
JPEG
640×480/D1
AVI
320×240/D1
30fps
10s/pc
Motion JPEG
Two Way Audio
Audio input 600Ω Typ
Audio output 600Ω Typ
155x95x30mm
135g
Please accord the following indication to inset SD card.
Please turn on secure button
Please cut off power supply when inset or put off SD card
Make sure secure button is turning on.
SD card
03
Unit Description of front Panel
SD card faucet direction
1.VIDEO OUT
2.DC12V
SD CARD: SD card insert groove PW switch On/Off
Direction of SD card
Support Max.capacity of 32GB
SD card Notice
Don’t touch metal part of SD card directly, otherwise, it will damage permanently by static
Please inset or put off SD card, when devise turn off.
1 2

Connecting the Device
Connecting indicates:
1, Use vide cable to connect monitor into video output port
Special adapter of DC12V
Camera
TV/monitor
04
Menu
05
Part 1: Manual Capture
Part 2: Auto Capture
Part 3: Motion Detect
Part 4: Advanced Setting
Part 5: Time/Date Setting

Manual Catpure Setup
06
1, Press MENU, enter into Manual Catpure setup interface
2, Use UP/DN key to select Photo 1,press OK/SHOT
key to capture for 1 picture
3, Use UP/DN key to select Photo 3, press OK/SHOT key to
continue catpure for 3 pictures
4, Use UP/DN key to select Movie, press OK/SHOT key to
begin/stop recording, saving for one AVI video
5, Use UP/DN key to select Movie Clip, press OK/SHOT key to
begin/stop recording, saving for several I minute AVI videos,
6, Use UP/DN key to exit
Auto Capture Setup
07
1, Press LF/RT key to enter into Auto Capture setup interface
2,Press OK key to enter into Auto capture interface,
use UP/DN key to select Auto Capturet On/OFF
3, Use UP/DN key to exit
4, Use UP/DN to select Master Capture Mode
5, Press OK key to enter into Master Capture Mode,
use UP/DN key to select Master auto capture 1 picture
6,Use UP/DN key to select Master auto capture 3 pictures
7,Use UP/DN key to select Movie 5 seconds,
Master auto recording, saving for AVI video

10, Use UP/DN key to enter into Movie PrerRcord interface,
note: choose Movie prerecord function, Picture-Picture function
will ineffective. And buttons will not high sensitivity as before.
Prerecord: Use prerecord,it can prerecord several seconds video
when you begin to prerecord. It can help user to review clear whan
happen in before,moment and after.
11, Use UP/DN key to select prerecord for 5 seconds.
12, Use UP/DN key to select prerecord for 10 seconds.
13, Use UP/DN key to Off
14, Use UP/DN key to exit Movie PreRecord interface
15, Use UP/DN key to select File Overwrite Setting
08
Auto Capture Setup
8,Use UP/DN key to select Movie 10 seconds,
Master auto recording, saving for AVI video
9, Use UP/DN key to select TimeSlot
9, Use UP/DN key to Exit Master Capture Mode
09
Auto Capture Setup
16,Press OK key to enter into File Overwrite Setting interface,
use UP/DN key to select On, it will auto continue to record and
cover before files
17,Use UP/DN key to select Off, it will clew SD card is full
18,Use UP/DN key to Exit File Overwrite Setting interface
19,Use UP/DN key to Exit Auto Capture interface

Motion Detect Setup
1, Press LF/RT key to enter into Motion detect interface
2, Use UP/DN key to select Range
3, Press OK key to enter into Range interface,use
UP/DN key to select MD range for whole screen
4,Use UP/DN key to select MD range for 1/4 screen
5,Use UP/DN key to select MD range for 1/6 screen
6,Use UP/DN key to exit Range
7,Use UP/DN key to select TimeSlot
8,Press OK key to enter in Timeslot interface,
Use UP/DN key to select internal time for 1 second
9,Use UP/DN key to select internal time for 3 seconds
10
Motion Detect Setup
10,Use UP/DN key to select internal time for 5 seconds
11,Use UP/DN key to exit Timeslot
12, Use UP/DN key to select Sensitivity
13,Press OK key to enter in Sensitivity interface,
Use UP/DN key to select Level of Sensitivity for Low
14,Use UP/DN key to select Level of Sensitivity for Middle
15,Use UP/DN key to select Level of Sensitivity for High
16,Use UP/DN key to Exit Sensitivity interface
17, Use UP/DN key to Exit Motion Dection
11

Advanced Setting
1,Press LF/RT key to enter into Advanced setup interface
2,Press OK key to enter into Photo Quality interface,
use UP/DN key to select High Quality
3, Use UP/DN key to select Standard Quality
4, Use UP/DN key to select Low Quality
5,Use UP/DN key to Exit Photo Quality interface
6, Use UP/DN key to select Movie Quality interface
7, Press OK key to enter into Movie Quality interface,
use UP/DN key to select QVGA
8, Use UP/DN key to select DI
9, Use UP/DN key to Exit Movie Quality interface
10, Use UP/DN key to select TV Output Standard
12
11, Press OK key to enter into TV Output Standard interface,
use UP/DN key to select NTSC system
12, Use UP/DN key to select PAL system
13, Use UP/DN key to exit TV Output Standard interface
14, Use UP/DN key to Exit Advanced Setting
Advanced Setting
13

Time/Date Setting
1, Press LF/RT key to enter into Time/Date Setting interface
2,Press OK key to enter into Set Time/Date interface,
use UP/DN key to set Time/Date
3, Press OK key to enter into Photo TimeStamp interface
4, Use UP/DN key to select Photo TimeStamp ON/OFF
5, Use UP/DN key to select Movie TimeStamp interface
6, Use UP/DN key to select Movie TimeStamp On/OFF
7, Use UP/DN key to Exit Time/Date Setting
14
Preview Mode
1, Press MODE key, enter into preview Mode interface
2, Press ZOOM key, enter into preview folder directory
3, Select Folder directory, press ZOOM key enter into root directory
4, Use UP/DN, LF/RT key to select browse file
5, Press MENU/OK key enter into browse file interface
6, Use UP/DN, LF/RT key to select browse file
7, Press MENU/OK key to open browse file
8, Press SHOT key to play/stop select file
9, Use UP key to quit play file
15

Delete One Mode
1, At preview Mode, use UP/DN, LF/RT key to select file
2, Press MENU key to enter into playback menu,
use UP/DN to select File Delete
3, Press MENU key to enter into File Delete interface
4, Use UP/DN key to select delete single
5, Press MENU key to enter into confirm menu
6, Use LF/RT key to select Yes key to delect
7, Use LF/RT key to select No to quit delete interface
8, Use UP/DN key to select Cancel, press MENU key to exit
16
Delete All Mode
1, At preview Mode, use UP/DN, LF/RT key to select file
2, Press MENU key to enter into playback menu,
use UP/DN to select File Delete
3, Use UP/DN key to select delete All
4, Press MENU key to enter into confirm menu
5, Use LF/RT key to select Yes key to delect
6, Use LF/RT key to select No to quit delete interface
7, Use UP/DN key to select Cancel, press MENU key to exit
17

Format Memory
1, Press MODE, enter into preview Mode
2, Press MENU key, enter into Playback Menu
3, Use UP/DN key to select Format
4, Press MENU key to open Format menu
5, Use LF/RT key to select Yes, all files will lose
6, Use LF/RT key to select No, press MENU key to exit
DVS
DIGITAL MOTION DETECT
VIDEO RECORD SYSTEM
18