DVS EC Reclaim Plus User manual

DVS®EC Reclaim Plus
Enjoy a healthier, more comfortable home
User Guide
Humidity Sensitive
0800 387 387 www.dvs.co.nz
Updated 17 August 2023

Optional features,
if in operation,
appear here.
Displayed on the home screen
House temperature
at the keypad.
Filter change
indication (if it is
due) appears here.
Menu / On / O Humidity sensor
DVS®EC Reclaim Plus | User Guide
Turning the system ON or OFF: Press and hold MENU to turn the system On or O.
Fan Boost: (Activate by holding down for 3 seconds) When in Fan Boost, the system
will operate at maximum speed (max air supply rate) for a set amount of time, and then it
will revert back to condensation control speed.
Standard features
To access the standard features: Press the MENU button. (This changes the screen to
the rst menu). Then move the highlight by using to select the desired function
and press OK to enter that function. Press the MENU button at any time to return to the
previous screen.
Fan Settings
Fan Tune: This allows you to adjust the condensation control fan speed (air supply rate)
by +/- 50%. The system operates at this speed constantly unless it is in Fan Boost or has
turned o because of a humid air supply (see Humidity Settings).
Note: Altering the fan settings will alter the behaviour of your system. If performance is
reduced, adjust this setting back to where it was originally set. If unsure, please contact
our service department on 0800 387 387.

Phone [phone] | www.dvs.co.nz
Humidity settings
For adjusting the sensitivity of the system to an
air supply which is more humid than the air inside the home.
Hum. Settings – Hum. Sens: Sets the level of sensitivity of the system to the supply air
being more humid than the air inside the home. Ranging from OFF, LOW, MED, Hi (high),
V Hi (very high).
‘Standard Setting = ‘Hi’
Hum. Settings – Hum. Time: Sets the time the system will allow supply air to be more
humid than the inside air. So, this setting creates a delayed reaction, ranging from Instant,
V Hi (15mins), Hi (30mins), Med (45mins), Low (60mins).
Standard Setting = ‘Instant’
Note: Altering the above Humidity Settings will alter the behavior of your system.
If performance is reduced, adjust this setting back to where it was originally set.
If unsure, please contact our service department on 0800387387 before you alter
any of the settings.
Utilities
For access to: Setting the System Clock, turning the Backlight On/O, setting System
Timer, resetting the Filter Timer, viewing Temperature and Humidity graphs and System
Diagnostics.
Optional features
These include Summer Vent Bypass, Solar Gain and Tempervents (Air Warmers)
To access the optional features (if tted): Press the MENU button. (This changes the
screen to the rst menu), then move the highlight by using the arrows to select
the desired option and press OK to select that option.
Mode: The way you want the optional feature to be activated. (Follow the prompts at the
bottom of each screen when setting).
Fan Speed: (Summer Vent Bypass and Solar Gain only). The Fan Speed the optional
feature will operate at when it is active.
Remember: Where you leave the highlight, is the mode in which the feature will operate
in. If a feature is currently on (active), it will show on the home screen in red.
State-of-the-
art European
counterow
heat exchanger

DVS® EC Reclaim Plus Installed on:
Installed by:
EcoStatic® Carbon Hybrid
Filter(s) type and number:
EcoStatic®
Useful Tips
System Performance
Your DVS® will help to provide a healthier,
drier living environment. A combination of
Ventilation, heating (in cooler months) and
cooling (in warmer months) are all keys
to providing a drier, healthier and more
comfortable living environment. Your DVS®
will provide you with very ecient ventilation.
Winter: (or cooler months). Your DVS® is
programmed to supply enough ventilation for
your home based on the size of your home. If
the home is now drier, you may wish to reduce
the level of ventilation using the Fan Tune
adjustment (see page one). The ideal being to
have the minimum level of ventilation while
retaining a drier, healthier home. If the home
is not yet drier, you can increase the Fan Tune
adjustment to ventilate at a higher level.
Summer: (or warmer months). Experience has
found that increasing the Fan Tune setting
to higher levels provides better ventilation
in warmer months. The optional Summer
Vent Bypass also increases eciency and
usefulness in warmer months.
If you feel you have system performance
issues, turn the system o and call
0800 387 387 so that we can assist you.
Filter(s)
EcoStatic® lters for DVS® are highly ecient
and will remove even very small dust particles.
They are expected to remain ecient
for approximately 12 months in a typical
installation, however, as the serviceable life
of the DVS® lter(s) will vary with location
and environmental factors, DVS® strongly
recommends annual replacement.
Maintenance of the equipment, including
replacement of the air lter(s) with genuine
DVS® lter(s), is required to ensure the
durability and performance of the system for
the warranty period and beyond. A message
will show on the controller when your lter(s)
are due to be changed.
Washing the lter(s) will destroy the lter’s
ability to perform eciently and will result in
dust build up in the system and in the home.
Call us on 0800 387 387 or visit
www.DVS.co.nz to purchase lters.
Five Year Warranty
DVS® Manufactured and branded products
carry a 5 year on site parts and labour warranty.
The warranty is dated (begins) on the day of
installation and/or supply of the goods.
Non DVS® manufactured and branded products
are not manufactured by the company. Non
DVS® manufactured and branded products
therefore, carry the warranty provided by the
specic product manufacturer.
The warranty covers manufacturing faults in
the product (equipment) and product failure
caused by incorrect installation.
For further assistance please call DVS® on 0800 387 387 or visit www.dvs.co.nz