Dwell Metro Bed User manual

Parts and Hardware
1x
2x
1x
2x
4x
16x
8x
8x
8x
1. Headboard
2. Side Rail
3. Footboard
4. Center Support Rail
5. Leg
6. Screw (M8 x 30mm)
7. Screw (M8 x 30mm)
8. Spring Washer
9. Washer
39x
4x
26x
26x
8x
1x
8x
1x
10. Bed Slats
11. Support Legs
12. Center Plastic Connector
13. End Cap
14. Screw
15. Wrench
16. Screw (M8 x 50mm)
17. Allen Key
METRO BED
EASTERN KING SIZE
2011/03
1
5
6
17
17
17
16
15
14
7
3
2
6
8
9
4
11
10
13
12
Assembly Instructions
1- Please unpack all components and check quantity against list above
2- Arrange components as shown in main diagram
3- Position the Headboard and Footboard as shown
4- Attach side rails into the Headboard and Footboard using two bolts on each end and on each side
5- Attach the center leg to the center rail using supplied bolts
6- attach the center rail to the headboard and footboard using supplied bolts
7- Please attach center plastic connectors to the metal center rail
8- Please place the bent wood slats into the center plastic connector and then attach the plastic end cap to the other
end of the slat.
9- Firmly push the plastic end cap into the metal side rail
10- Continue Steps 8-9 until all slats are completed.